Researchers put significant effort to decrease the environmental impact of concrete by using industrial by-products as an alternative binder. However, the considerable environmental impact still exists due to the consumption of natural resources as aggregates. Natural aggregates are the most used resources by volume in the construction sector. Therefore, it is necessary to investigate by-products as an alternative to natural aggregates as well. This study presents the environmental impact of lightweight concrete (LWC) produced by replacing natural aggregates with recycled waste plastic (polyethylene) (RWP) and partially replacing Portland cement with Class F fly ash (FA). Life Cycle Assessment (LCA) was performed to compare a conventional LWC, containing pumice as natural aggregate and Portland cement as a binder, with green LWC, containing 30% RWP as pumice replacement and 20% FA as cement replacement. These scenarios were evaluated in terms of global warming potential, abiotic depletion, ozone layer depletion, terrestrial ecotoxicity, photochemical oxidation, acidification and eutrophication. LCA was coupled with mechanical tests at 7 days and 28 days. RWPs were found to be an environment-friendly replacement material for natural lightweight aggregates with an overall decrease in all CML-IA impacts except eutrophication. Tested green mix design also provided sufficient strength for nonstructural applications.
The sustainability of wind power plants depends on the selection of suitable installation locations, which should consider not only economic and technical factors including manufacturing and raw materials, but also issues pertaining to the environment. In the present study, a novel methodology is proposed to determine the suitable locations for wind turbine farms by analyzing from the environmental perspective. In the methodology, the life cycle assessment (LCA) of wind turbines is incorporated into the decision process. The criteria are ranked using analytical hierarchy process (AHP). The study area is chosen as the western region of Türkiye. The obtained suitability map reveals that wind speed is not the sole criterion for selecting a site for wind turbine farms; other factors, such as bird migration paths, distance from urban areas and land use, are also crucial. The results also reveal that constructing wind power plants in the vicinity of İzmir, Çanakkale, Istanbul, and Balıkesir in Türkiye can lead to a reduction in emissions. İzmir and its surrounding area show the best environmental performance with the lowest CO2 per kilowatt-hour (7.14 g CO2 eq/kWh), to install a wind turbine due to its proximity to the harbor and steel factory across the study area. Çanakkale and the northwest region of Türkiye, despite having high wind speeds, are less environmentally favorable than İzmir, Balıkesir, and Istanbul. The findings of LCA reveal that the nacelle and rotor components of the wind turbine contribute significantly (43–97%) to the environmental impact categories studied, while the tower component (0–36%) also has an impact.
1 April 2021 in Integrated Environmental Assessment and Management
Purpose: While the environmental and economic aspects of sustainability have been extensively studied, social sustainability has been largely neglected and necessitates a thorough investigation. The study examines the intricate nature of social impact assessments, considering the substantial significance of the textile industry in the global economy and its wide-ranging social implications. This study comprehensively examines critical social subcategories used in the life cycle assessment (LCA) methodology to highlight the social sustainability of the textile sector. The objective of the study is to enhance and optimize the subcategories proposed by UNEP/SETAC for social LCA by examining, expanding, and adapting them specifically to the textile industry, offering a more focused and sector-specific viewpoint on key metrics. Methods: The study examines its use in textile production and distribution by first carefully evaluating the subcategories established by UNEP/SETAC for social LCA. A systematic assessment of positive and negative social impacts throughout the entire supply chain is examined through global standards, textile-specific standards, and literature. Analysis of semi-structured stakeholder interviews and a comprehensive literature review reveals important social subcategories, some of which go beyond the S-LCA guidelines. Results: New social metrics, including quality, women’s rights, gender pay gap, collaboration with NGOs, academic research, circularity implementation, and environmental issues, were formulated from stakeholders’ perspectives, tailored specifically for the textile sector. Conclusions: The results of the study aim to promote a socially sustainable textile industry by guiding stakeholders to make informed decisions and adopt methods that prioritize social responsibility as well as environmental and economic factors.
11 April 2022 in Environmental Science and Pollution Research