The auxiliary diagnosis and debugging of filters play an increasingly important role in the design of microwave filters, where aggressive space mapping (ASM) is one of the most commonly used debugging methods. This paper introduces ASM and designs a sixth-order two-layer microstrip interdigital filter with a center frequency of 20.4 GHz and a bandwidth of 1.6 GHz using ASM. The filter reached design indexes after seven iterations, which greatly reduces the number of simulations in the fine model, thereby saving time. It was fabricated with Micro-Electro-Mechanical Systems technology and the size of the chip is 7 mm × 3 mm × 0.8 mm. The measurement result was in good agreement with the simulation result.
14 March 2019 in International Journal of RF and Microwave Computer-Aided Engineering
A double-layer silicon-based stripline filter with a center frequency of 20.76 GHz and a bandwidth of 2 GHz was designed by using an aggressive space mapping (ASM) and fabricated with microelectromechanical systems (MEMS) technology. The measurements agreed well with simulation, showing efficiency and accuracy of the ASM algorithm. Over temperature range of −50 to 80°C, the filter's performance such as insertion loss, bandwidth and central frequency were investigated and discussed, and the measured frequency drift is −55.5 ppm/°C and the bandwidth variation is ±4% over temperature range of −50 to 80°C. At 150°C after 1000 h of aging test, although the insertion loss of the filter slightly increased from 2.18 to 2.4 dB and the passband ripple deteriorated, the stopband rejection performance improved.