Utilizing the organic fraction of agri-food industry waste for fertilization represents one approach to waste management, with composting emerging as a popular method. Composts derived from this waste may contain plant hormones alongside primary macronutrients. This study aimed to evaluate the content of plant hormones in composts crafted from the organic fraction of agri-food industry waste. The presence of these substances was ascertained using liquid chromatography–mass spectrometry (LC-MS) analysis, applied to extracted samples from three composts produced in a bioreactor and three obtained from companies. The results indicate the presence of 35 compounds, which belong to six types of plant hormones: auxins, cytokinins, gibberellins, brassinosteroids, abscisic acid, and salicylic acid, in composts for the first time. The highest amount of plant hormones was noted in buckwheat husk and biohumus extract (35 compounds), and the lowest in hemp chaff and apple pomace (14 compounds). Brassinosteroids (e.g., brassinolide, 28-homobrassinolide, 24-epicastasterone, 24-epibrassinolide, and 28-norbrassinolide) and auxins (e.g., indolilo-3-acetic acid) are dominant. The highest concentration of total phytohormones was reported in biohumus extract (2026.42 ng g⁻¹dry weight), and the lowest in organic compost (0.18 ng g⁻¹dry weight).

Due to thegrowing awareness of fossil fuel depletion and environmental issues, biodiesel alternative fuel is currently of substantial interest. This research assessed herbal industry wastes as a potential resource for biodiesel production for the first time. Fatty acid methyl esters (FAMEs), obtained in the transesterification reaction, were extracted from the herbal samples by ultrasound-assisted extraction and identified withgas chromatography-mass spectrometry in the selected ion monitoring mode. The presence of at least 20 (e.g., in chamomile and chicory) FAMEs, up to 31 in nettle and senna, was reported. The unsaturated FAMEs were found in higher amounts than saturated. Linoleic acidwas the major polyunsaturated FAME in herbal wastes, while palmitic acid was the major saturated FAME. The highest content of FAMEs was identified in rye bran, Figure tea, and chicory. According to the cetane number prediction, BS EN 14214:2012+A2:2019, and hierarchical clustering on principal components (HCPC)wastes from, e.g., nettle, sage, and senna, are the most suitable in biodiesel production with fuel properties acceptable by the EuropeanStandards.Principal component analysis and HCPC allowed to classify and groupsimilar plants according to their FAMEs content; however, additional studies of herbal biofuel properties are needed.

This article examines the process of pressure agglomeration of garden waste compost mixed with sewage sludge ash (SSA) to produce granulated fertilizer material, using a flat die rotating compaction roller system. The study evaluated the effects of adding SSA at mass fractions of 0%, 10%, 20%, 30%, 40%, and 50% on the process of pelleting and the quality of pellets. Increasing the SSA content from 0% to 50% reduced the power demand of the pellet mill by 13.5% (from 4.92 kW to 4.25 kW), decreased the kinetic strength of the pellets by 0.7% (from 98.21% to 97.56%), and slightly increased the pellet density, by 2.6% (from 1641.17 kg·m⁻³ to 1684.09 kg·m⁻³). The high density of the pellets, i.e., over 1600 kg·m⁻³, indicates that they are of market quality. A chemical analysis revealed that SSA addition positively influenced fertilizer properties. A higher SSA content (up to 50%) decreased the nitrogen content (1.4% to 0.73%) but significantly increased the phosphorus content (0.32% to 2.67%). The potassium content remained stable, at approximately 1.3%. The process of co-pelleting also diluted the heavy metals present in SSA, reducing the final product’s lead and cadmium levels to meet the standards set for fertilizers. Although the SSA contained high levels of heavy metals (lead: 93.89 mg·kg_d.m.⁻¹, cadmium: 11.28 mg·kg_d.m.⁻¹), these elements were not detected in the compost. Co-pelleting of compost and SSA produces high-density, high-quality fertilizer pellets with favorable nutrient profiles and heavy metal contents, complying with regulatory standards. Moreover, by converting garden waste and SSA into valuable agricultural products, the process supports sustainable waste management. This study evaluated the impact of SSA additives on the composition and water absorption of the granulate, providing insights into its suitability as an eco-friendly fertilizer alternative and its potential implications for sustainable agricultural practices.

The sharing of species of ectomycorrhizal fungi (EMF) among different co-occurring host plant species could allow the formation of common mycorrhizal networks, which can alter plant–plant interactions and succession. Such sharing of EMF among woody species is thought to be common in many forests, but very few herbaceous plants form EMF, so they are assumed to be excluded from EMF networks in forests. We studied the EMF on roots of a common coniferous tree, Pinus sylvestris, and a co-occurring rare herbaceous perennial plant, Pulsatilla patens (Ranunculaceae), in northeastern Poland. We examined roots from co-occuring P. sylvestris and P. patens, visually classified EMF into morphotypes, studied tissue sections of mycorrhizal structures using compound microscopy, and used DNA sequencing to identify the fungi. On both host plant species, we observed EMF colonization, with colonized root tips exhibiting a swollen appearance, as well as a variety of colors and textures of fungal mycelium covering and emanating from those swollen tips. Sectioning and microscopic examination of an EMF morphotype common on P. patens confirmed the presence of a mantle and Hartig net, indicating the likely presence of functional ectomycorrhizal structures. The two most frequent EMF were Cenococcum geophilum and Piloderma olivaceum, and the latter was found to associate with both host plant species. Several EMF found here only on P. patens, including C. geophilum and two Russula species, are known from previous studies to also associate with P. sylvestris and other tree species. The observation of shared EMF between a coniferous tree and an understory herb indicates the potential for common mycorrhizal networks to alter interactions between these two species and may also indicate a unique way in which the distribution and abundance of a rare herbaceous plant may be influenced by shared mutualisms with a common co-occurring woody plant.

This paper presents the findings of a study of the pelleting process of pine sawdust with the addition of waste in the form of potato pulp (as a natural binder), in the context of producing fuel pellets. The process of pelleting was carried out for sawdust and for a mixture of sawdust and potato pulp (10, 15, 20, and 25%). The highest moisture content was obtained in the case of pellets produced from a mixture of straw with a 25% potato pulp content, i.e., 26.54% (with a potato pulp moisture content of 85.08%). Increasing the potato pulp content in a mixture with sawdust from 10 to 25% reduced the power demand of the pelletizer by approx. 20% (from 7.35 to 5.92 kW). The obtained density values for pellets made from a mixture of sawdust and potato pulp (over 1000 kg∙m⁻³) with a potato pulp content of 10% make it possible to conclude that the obtained pellets meet the requirements of the ISO 17225-2:2021-11 standard. Increasing the potato pulp content from 0 to 25% caused a slight decrease in the heat of combustion, i.e., from 20.45 to 20.32 MJ∙kg⁻¹, as well as in the calorific value, from 19.02 to 18.83 MJ∙kg⁻¹ (both for dry sawdust matter and the mixture). The results of the laboratory tests were used to verify the densification process of mixtures of sawdust and potato pulp under industrial conditions at the PANBAH plant, using pelleting mixtures with a 5%, 10%, and 25% content of potato pulp. Industrial research also confirmed that the use of the addition of potato pulp in a mixture with sawdust significantly reduces the power demand of the pelletizer, and it also increases the kinetic strength of the obtained pellets.

The paper presents the results of a study on the effects of the addition of bread bakery waste (stale bread, sometimes infected with mold, from store returns) to agricultural waste consisting of triticale straw on the process of solid biofuel pelleting and the physical and fuel properties of the obtained pellets. The pelleting process was conducted in a pelletizer equipped with a flat matrix, with holes 6 mm in diameter, and two pelleting rollers (for straw alone and for a mixture of straw and bread waste with mass fractions of 5, 10, and 15%). The addition of bread waste during the process of pelleting resulted in reduced power demand for the pelletizer in each of the analyzed cases. The largest decrease in the power demand (by approximately 18%, i.e., from 1.27 to 1.04 kW) was recorded for a 15% addition of sunflower seed bread to the mixture with straw. Moreover, the addition of bread waste also caused a significant increase in the kinetic strength of pellets compared to pellets produced from straw alone. The highest kinetic strength was obtained in the case of pellets produced from a mixture of straw with a 15% white bread content, i.e., 99.43%. For all of the analyzed types of additives, kinetic strength increased with increasing additive content. In each of the analyzed cases, the obtained values of density of pellets produced from a mixture of straw and bread waste, as well as the kinetic strength, allow for the conclusion that the obtained pellets, in this respect, meet the requirements of ISO 17225-2:2021 and ENplus standards for Class A1 pellets.