Seungho Jung

Prof. Seungho Jung

Environmental and Safety Engineering, Ajou University, Suwon, Korea
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2020 in Catalysts
Verified
Journal Article
Open access
PDF file
CPChanyeong Park
Chanyeong Park
KSkim soosan
kim soosan
YKYeonghwan Kwon
Yeonghwan Kwon
CJChaehyeon Jeong
Chaehyeon Jeong
YCYujin Cho
Yujin Cho
Jechan LeeJechan Lee
Jechan Lee
Pyrolysis of polyethylene terephthalate (PET) produces polycyclic hydrocarbons and biphenyl derivatives that are harmful to human health and the environment. Therefore, a palladium metal catalyst (5 wt.% Pd loaded on activated carbon) was used to prevent the formation of harmful materials. When a Pd catalyst/PET ratio of 0.01 was applied in pyrolysis of PET, it did not show a meaningful difference in the generation of polycyclic hydrocarbons and biphenyl derivatives. However, when a Pd catalyst/PET ratio of 0.05 was used during pyrolysis, it prevented their formation and generation at experimental temperature ranges (400–700 °C). For example, the concentration of 2-naphthalenecarboxylic acid produced, which is a typical polycyclic hydrocarbon material, was reduced by 44%. In addition, the concentration of biphenyl-4-carboxylic acid, which is contained in biphenyl derivatives, was reduced by 79% compared to non-catalytic pyrolysis at 800 °C. This was because the ring-opening reaction and free radical mechanism caused by the Pd catalyst and thermal cracking were dominant during the pyrolysis of PET. Apart from these materials, amine compounds were generated as products of the pyrolysis of PET. Amine concentration showed a similar trend with polycyclic hydrocarbons and benzene derivatives. Based on these results, the total concentration of polycyclic hydrocarbons and biphenyl derivatives was compared; the results confirmed that the concentrations of all substances were reduced. This research suggests that a metal-supported catalyst will help create a more environmentally friendly and reliable method of industrial plastic waste disposal.

25 September 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YLYoun-Jun Lee
Youn-Jun Lee
HLHae Su Lee
Hae Su Lee
Chang-Gu LeeChang-Gu Lee
Chang-Gu Lee
Seong-Jik ParkSeong-Jik Park
Seong-Jik Park
Jechan LeeJechan Lee
Jechan Lee
GSGwy-Am Shin
Gwy-Am Shin
Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO2 to achieve extended photoresponse to visible light and increased photocatalytic efficiency. In this study, we report the synthesis of a PANI/TiO2 composite with different weight ratios of PANI, which was subsequently employed for photocatalytic degradation of methylene blue (MB), bisphenol A (BPA), and bacteriophage MS2 under visible-light irradiation. The functional groups, morphology, and light response of the composite were characterized by Fourier-transform infrared spectroscopy, field-emission transmission electron microscopy, and diffuse reflectance UV–visible spectroscopy, respectively. The PANI/TiO2 composite containing 4% by weight ratio of PANI was most suitable for MB degradation, and this photocatalyst was very stable even after repeated use (four cycles). The degradation of BPA and bacteriophage MS2 by PANI/TiO2 composite reached 80% in 360 min and 96.2% in 120 min, respectively, under visible-light irradiation. Therefore, the PANI/TiO2 composite with enhanced visible-light photocatalytic efficiency and stability can be widely used for the degradation of water contaminants.

28 June 2022 in Batteries
Verified
Journal Article
Open access
PDF file
JHJiYun Han
JiYun Han
Seungho JungSeungho Jung
Seungho Jung
Lithium-ion batteries (LIBs) have been used as electrochemical energy storage devices in various fields, ranging from mobile phones to electric vehicles. LIBs are composed of a positive electrode, a negative electrode, an electrolyte, and a binder. Among them, electrolytes consist of organic solvents and lithium ion conducting salts. The electrolytes used in LIBs are mostly linear and cyclic alkyl carbonates. These electrolytes are usually based on their combinations to allow the use of Li as the anodic active component, resulting in the high power and energy density of batteries. However, these organic electrolytes have high volatility and flammability that pose a serious safety issue when exposed to extreme conditions such as elevated temperatures. At that time, these electrolytes can react with active electrode materials and release a considerable amount of heat and gas. In this study, a simultaneous thermal analysis-mass spectrometry analysis was performed on six different organic solvents to examine the effect of water on hydrogen fluoride (HF) generation temperature in the electrolyte of a LIB. The electrolytes used in the experiment were anhydrous diethyl carbonate, 1,2-dimethoxyethane, ethylene carbonate, 1,3-dioxolane, tetrahydrofurfuryl alcohol, and 2-methyl-tetrahydrofuran, each containing LiPF6. The HF formation temperature was observed and compared with that when water entered the electrolyte exposed to high-temperature conditions such as fire.

8 May 2023 in Energies
Verified
Journal Article
Open access
PDF file
JKJongbeom Kwak
Jongbeom Kwak
HLHak-Tae Lee
Hak-Tae Lee
SPSomin Park
Somin Park
JPJaehyuk Park
Jaehyuk Park
Seungho JungSeungho Jung
Seungho Jung
After the Paris Agreement was signed in 2015, many countries worldwide focused on the hydrogen economy, aiming for eco-friendly and renewable energy by moving away from the existing carbon economy, which has been the primary source of global warming. Hydrogen is the most common element on Earth. As a light substance, hydrogen can diffuse quickly; however, it also has a small risk of explosion. Representative explosion accidents have included the Muskingum River Power Plant Vapor Cloud Explosion accident in 2007 and the Silver Eagle Refinery Vapor Cloud Explosion accident in 2009. In addition, there was an explosion in a hydrogen tank in Gangneung, Korea, in May 2019, and a hydrogen refueling station (HRS) in Norway exploded in 2018. Despite this risk, Korea is promoting the establishment of HRSs in major urban centers, including downtown areas and public buildings, by using the Regulatory Sandbox to install HRSs. This paper employed the Hydrogen Risk Assessment Model (HyRAM) of Sandia National Laboratories (SNL), a quantitative risk assessment (QRA) program specialized in hydrogen energy for HRSs installed in major urban hubs. A feasibility evaluation of the site conditions of an HRS was conducted using the French land use planning method based on the results obtained through evaluation using the HyRAM and the overpressure results of PHAST 8.0. After a risk assessment, we confirmed that an HRS would be considered safe, even if it was installed in the city center within a radius of influence of jet fires and overpressure.

18 December 2015 in Korean Journal of Chemical Engineering
Verified
Journal Article
Closed access
PDF file
Seungho JungSeungho Jung
Seungho Jung

7 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
MMMimi Min
Mimi Min
CYCheolhee Yoon
Cheolhee Yoon
NYNarin Yoo
Narin Yoo
JKJinseo Kim
Jinseo Kim
YYYeo Song Yoon
Yeo Song Yoon
Seungho JungSeungho Jung
Seungho Jung
The transition to hydrogen as a clean energy source is critical for addressing climate change and supporting environmental sustainability. This review provides an accessible summary of general research trends in hydrogen risk assessment methodologies, enabling diverse stakeholders, including researchers, policymakers, and industry professionals, to gain insights into this field. By examining representative studies across theoretical, experimental, and simulation-based approaches, the review highlights prominent trends and applications within academia and industry. The key focus is on evaluating risks in stationary and transportation applications, paying particular attention to hydrogen storage systems, transportation infrastructures, and energy systems. By offering a concise yet informative summary of hydrogen risk assessment trends, this paper aims to serve as a foundational resource for fostering safer and more sustainable hydrogen systems.