We report resistance results from carbon nanotube (CNT) vias of widths from 150 to 60 nm for potential application in integrated circuits technology. Selective CNT growth inside the vias with an areal density of 2×10 11 /cm 2 is achieved with a statistical average resistance of 1.7 kΩ with standard deviation between 420 Ω and 7.1 kΩ, and lowest resistance of 150 Ω for 60 nm vias, the lowest reported value for sub-100 nm-CNT vias. Statistical analysis yields a best-case projected value of 295 Ω for a 30 nm via, within one order of magnitude of its copper and tungsten counterparts.
The electrical properties of carbon nanofibers (CNFs) can be affected by adsorbed gas species. In this study, we compare the resistance values of CNF devices in a horizontal configuration in air and under vacuum. CNFs in air are observed to possess lower current capacities compared to those in vacuum. Further, Joule heating due to current stressing can result in desorption of gas molecules responsible for carrier trapping, leading to lower resistances and higher breakdown currents in vacuum, where most adsorbed gaseous species are evacuated before any significant re-adsorption can occur. A model is proposed to describe these observations, and is used to estimate the number of adsorbed molecules on a CNF device.
The modeling of carbon nanotube ultracapacitor (CNU) performance based on the simulation of electrolyte ion motion between the cathode and the anode is described. Using a molecular dynamics (MD) approach, the equilibrium positions of the electrode charges interacting through the Coulomb potential are determined, which in turn yield the equipotential surface and electric field associated with the capacitor. With an applied ac voltage, the current is computed based on the nanotube and electrolyte particle distribution and interaction, resulting in the frequency-dependent impedance Z(ω). From the current and impedance profiles, the Nyquist and cyclic voltammetry (CV) plots are then extracted. The results of these calculations compare well with existing experimental data. A lumped-element equivalent circuit for the CNU is proposed and the impedance computed from this circuit correlates well with the simulated and measured impedances.
4 September 2020 in Journal of Electronic Materials