A Monte Carlo (MC) and molecular dynamics (MD) coupling simulation scheme for sputtered particle transport was first proposed in this work. In this scheme, the MC method was utilized to model the free-flight process of sputtered atoms, while the MD model was adopted to simulate the collision between the sputtered atom and background gas atom so as to self-consistently calculate the post-collision velocity of the sputtered atom. The reliability of the MD collision model has been verified by comparing the computation results of the MD model and of an analytical model. This MC-MD coupling simulation scheme was used to investigate the influence of target-substrate distance on the transport characteristic parameters of sputtered Cu atoms during magnetron sputtering discharge. As the target-substrate distance increased from 30 to 150 mm, the peak energy of the incident energy distribution of deposited Cu atoms decreased from 2 to 1 eV due to the gradual thermalization of sputtered atoms. The distribution of differential deposition rate in unit solid angle firstly became more forward-peaked and then reversely approached the cosine distribution, which was agreed with the existing experimental observations. This work is expected to provide a more realistic simulation scheme for sputtered particle transport, which can be further combined with the MD simulation of sputtered film growth to explore the influence mechanism of process parameters on the properties of sputtered film.
This paper develops an instruction method for promoting design innovation capability through a design-based program with identification, modeling, simulation, and prototyping (IMSP). The computational thinking and conceptualization of sustainability were incorporated. The interaction between instruction treatment and participants’ personality was investigated. Eighty-six engineering undergraduates participated in this experimental study for exploring the effectiveness of the IMSP program. The findings indicate that 1) the IMSP program promoted undergraduates’ computational thinking, and further enhanced their design innovation ability; 2) the program that integrated the conceptualization of sustainability has better teaching effects than that without the conceptual integration; 3) the personal characters of innovation proaction and emotional intelligence acted as moderators in the ISMP program. This study presents a practical method for improving design innovation capability, and supports the feasibility and necessity of emphasizing computational thinking and sustainability in the innovation training program for engineering education.
The uniformity of magnetron-sputtered films can be evaluated using an analytical model whose key parameters, such as included angle cosine and distance between infinitesimal elements, are so far calculated based on targets-substrate geometric relation. This existing computation scheme is not applicable in a triple-target magnetron co-sputtering system with complex targets-substrate geometric relation. In this work, a computation method was proposed to calculate the deposition uniformity of a triple-target magnetron co-sputtering system based on the analytical model. In this method, the coordinates of the infinitesimal elements on the substrate and targets were calibrated in an identical global coordinate system via coordinate transformation, such that the key parameters of the analytical formula can be evaluated by vector computation. The effects of the target-substrate angle and target-substrate distance on the deposition uniformity of a given triple-target magnetron co-sputtering system were investigated via numerical simulation and experiment, respectively. Simulation results were consistent with experimental results. Relevant evolution mechanisms of the deposition uniformity of the co-sputtering system with the variations of target-substrate parameters were discussed in detail based on the simulation results. It is expected that this computation approach can be employed to provide theoretical guidance for the fast and economical fabrication of high-quality, large-area film and composite films.
This empirical research aims to propose and examine an online teaching approach that embeds modeling-eliciting activities (MEA). The approach guides teachers to create a well-interactive online learning environment and improve the conceptual learning and professional skills of engineering undergraduates. The professional skills are defined as critical thinking and collaboration. A structured teaching procedure was implemented sequentially by task introduction, problem description, performance analysis, structural optimization, and solution discussion. The six principles of MEA were organically integrated with the teaching procedure, creating a inspiring, open-ended, and teamwork learning environment. The instruments used to collect data included conceptual learning tests, design report evaluations, learning reflection analyses, and interaction statistics. The findings suggested that the MEA-embedded online courses have significant advantages for improving learners’ conceptual learning and professional skills. The proposed approach guides the learners to make appropriate decisions and practical actions, enhancing their critical thinking. The MEA inspires learners’ positive attitudes and high participation, providing an emotional basis for group collaboration. The discussions on the open topics and thought process reflections create a collaborative environment. Besides, the statistics on the online teaching platform show that the MEA has a significant role for interaction promotion in the online course.