Clean renewable energy is given high priority to generate power in power system dispatching. Unfortunately, the objective to minimize wind power curtailment may results in additional costs, since the inverse peak regulation characteristic of wind power probably result in redundant power qualities curtailed to ensure the balance of the electric supply and demand in real time. In this paper, considering the cost of deep peak regulation of thermal unit and wind power curtailment, unit commitment comprehensive optimal model is proposed to minimize total cost by searching the optimal wind power curtailment. In order to achieve an economic strategy among the wind power curtailment and the deep peak regulation, two indexes including the amount of hourly optimal wind power curtailment and the critical value of comprehensive wind power curtailment are developed. Particle swarm optimization algorithm is employed for solving the proposed model. Afterwards, the relationship between the degree of deep peak regulation and the amount of wind power curtailment is researched, the derived conclusions can provide valuable information for system operators.
Photovoltaic (PV) output is susceptible to meteorological factors, resulting in intermittency and randomness of power generation. Accurate prediction of PV power output can not only reduce the im-pact of PV power generation on the grid but also provide a reference for grid dispatching. Therefore, this paper proposes an LSTM-attention-embedding model based on Bayesian optimization to predict the day-ahead PV power output. The statistical features at multiple time scales, combined features, time features and wind speed categorical features are explored for PV related meteorological factors. A deep learning model is constructed based on an LSTM block and an embedding block with the connection of a merge layer. The LSTM block is used to memorize and attend the historical information, and the embedding block is used to encode the categorical features. Then, an output block is used to output the prediction results, and a residual connection is also included in the model to mitigate the gradient transfer. Bayesian optimization is used to select the optimal combined features. The effectiveness of the proposed model is verified on two actual PV power plants in one area of China. The comparative experimental results show that the performance of the proposed model has been significantly improved compared to LSTM neural networks, BPNN, SVR model and persistence model.
This paper provides and illustrates a design-based learning (DBL) approach for fostering individual sustainability competency in engineering education. We performed two studies with engineering students in typical educational activities. The first study helped students perform a topic-specific design task in the practicum unit of a sensor technology course, which compared the performance of the DBL approach and conventional passive learning approach. The second study guided students to develop innovative projects for participating in the "Internet Plus" Innovation and Entrepreneurship Competition (IPIEC). To validate the proposed approach, stakeholder questionnaires and performance evaluations were implemented. The results show that the DBL approach was viable for sustainability competency teaching in terms of learning demand and teaching procedure. We found that students in the DBL group gave more prominence in the individual competencies, such as system-thinking, multidisciplinary applications, and collaboration. These findings suggest that applying the DBL approach to train sustainability competency in engineering education is beneficial for promoting students’ abilities in dealing with challenges involved in sustainability practice.
To improve the robustness and stability of the photovoltaic grid-connected inverter system, a nonlinear backstepping-based H ∞ controller is proposed. A generic dynamical model of grid-connected inverters is built with the consideration of uncertain parameters and external disturbances that cannot be accurately measured. According to this, the backstepping H ∞ controller is designed by combining techniques of adaptive backstepping control and L2-gain robust control. The Lyapunov function is used to design the backstepping controller, and the dissipative inequality is recursively designed. The storage functions of the DC capacitor voltage and grid current are constructed, respectively, and the nonlinear H ∞ controller and the parameter update law are obtained. Experimental results show that the proposed controller has the advantage of strong robustness to parameter variations and external disturbances. The proposed controller can also accurately track the references to meet the requirements of high-performance control of grid-connected inverters.
The prediction of wind power generation is an important basis for the rational scheduling of new energy sources in wind power. However, the severe fluctuations in wind power output under extreme weather conditions pose a serious challenge for ultra-short-term wind power output prediction. A combination forecasting method for ultra-short-term wind power that comprehensively considers extreme weather and normal weather is proposed to address the above issues. To explore the differences in power time series characteristics under different scenarios in terms of the relationships between wind power output prediction errors and different weather types, time series generative adversarial networks are used to expand small sample datasets under extreme weather conditions, and a bidirectional long short-term memory (BiLSTM) deterministic prediction model based on a time attention mechanism is established. On this basis, a kernel density estimation probability prediction model is proposed for different extreme scenarios. A case study was conducted to verify the data of a wind farm in China. At the 90% confidence level, the proposed method improved the PICP and PINAW of various extreme weather conditions by averages of 10.04% and 20.47%, respectively. The results showed that the proposed method has good adaptability for wind power prediction under extreme weather conditions.
This paper develops an instruction method for promoting design innovation capability through a design-based program with identification, modeling, simulation, and prototyping (IMSP). The computational thinking and conceptualization of sustainability were incorporated. The interaction between instruction treatment and participants’ personality was investigated. Eighty-six engineering undergraduates participated in this experimental study for exploring the effectiveness of the IMSP program. The findings indicate that 1) the IMSP program promoted undergraduates’ computational thinking, and further enhanced their design innovation ability; 2) the program that integrated the conceptualization of sustainability has better teaching effects than that without the conceptual integration; 3) the personal characters of innovation proaction and emotional intelligence acted as moderators in the ISMP program. This study presents a practical method for improving design innovation capability, and supports the feasibility and necessity of emphasizing computational thinking and sustainability in the innovation training program for engineering education.