Compaction quality is directly related to the structure and seepage stability of a rockfill dam. To timely and accurately test the compaction quality of the rockfill material, four real‐time test indexes were chosen to characterize the soil compaction degree based on the analysis of roller vibratory acceleration, including acceleration peak value (ap), acceleration root mean square value (arms), crest factor value (CF), and compaction meter value (CMV). To determine which of these indexes is the most appropriate, a two‐part field compaction experiment was conducted using a vibratory roller in different filling zones of the dam body. Data on rolling parameters, real‐time test indexes, and compaction quality indexes were collected to perform statistical regression analyses. Combined with the spectrum analysis of the acceleration signal, it was found that the CF index best characterizes the compaction degree of the rockfill material among the four indexes. Furthermore, the quantitative relations between the real‐time index and compaction quality index were established to determine the control criterion of CF, which can instruct the site work of compaction quality control in the rockfill rolling process.
29 July 2024 in Construction and Building Materials
The particle size distribution of granular blasting materials has a vital influence on the filling quality of earth-rockfill dams. The engineering experience-based method used to evaluate the particle size distribution has shortcomings at both the theoretical and practical aspects. This article proposes a new evaluation method based on the fractal theory. Grading sieve tests on granular materials, mass fractal analysis of particle size distribution, and a probability distribution model test of the characteristic parameters are used to revise the functional relationships between the fractal dimension D and the uniformity coefficient/curvature coefficient (Cu/Cc) of the grading curve. The feasibility of using D to evaluate the particle size distribution and the optimal fine grain content is then analyzed and determined. According to the results, the geometric shapes of the granular blasting materials have fractal characteristics, and their particle size distribution has a fractal distribution. The ranges of D where the rockfill and transition materials have a good particle size distribution are D = 2.254–2.529 and D = 2.358–2.559, corresponding to optimal fine grain content of 1.953%–11.805% and 10.268%–23.123%, respectively. Fractal dimension has a solid theoretical basis and strong practical applicability as an evaluation index for the particle size distribution of granular blasting materials.
As natural backwater structures, landslide dams both threaten downstream human settlement or infrastructure and contain abundant hydro-energy and tourism resources, so research on their development feasibility is of great significance for permanently remedying them and effectively turning disasters into benefits. Through an analysis of the factors influencing landslide dam development and utilization, an index system (consisting of target, rule, and index layers) for evaluating development feasibility was constructed in this paper. Considering uncertainty and randomness in development feasibility evaluation, a cloud model-improved evaluation method was proposed to determine membership and score clouds based on the uncertainty reasoning of cloud model, and a cloud model-improved analytic hierarchy process (AHP-Cloud Model) was introduced to obtain weights. Final evaluation results were obtained using a hierarchical weighted summary. The improved method was applied to evaluate the Hongshiyan and Tangjiashan landslide dams and the results were compared with the maximum membership principle results. The results showed that the cloud model depicted the fuzziness and uncertainty in the evaluation process. The improved method proposed in this paper overcame the loss of fuzziness in the maximum membership principle evaluation results, and was capable of more directly presenting evaluation results. The development feasibility of the Hongshiyan landslide dam was relatively high, while that of the Tangjiashan landslide dam was relatively low. As suggested by these results, the evaluation model proposed in this paper has great significance for preparing a long-term management scheme for landslide dams.
With regard to the high anti-scouring and abrasion-resistant performance requirements and great temperature control difficulties of lining concrete for large-sized spillway tunnels, in this study, a performance test was conducted on anti-scouring and abrasion-resistant concrete. The finite element method was used to analyze the temperature change rules of sidewall C9050 (design strength of concrete is 50 MPa at 90 days) lining concrete for the spillway tunnel. Further, a new cooling measure was proposed for adopting “early-throughput, high-flow and short-duration”. As indicated by the results of this study, fly ash could reduce water consumption and micro-cracks via its “morphological effect”. Silica fume could improve the early strength of cement concrete and make up for the strength loss caused by fly ash. Polyvinyl alcohol (PVA) fiber could enhance concrete durability. The doping of these three additives reinforced the strength and abrasion resistance of concrete. The results showed that the temperature of the lining concrete presented a change trend of “rapid increase first, followed by a slow decrease”. The peak temperature was reached roughly 2 days after casting. In addition, properly increasing throughput flow or decreasing throughput temperature in the early stage of casting could significantly reduce the highest temperature and maximum temperature difference of concrete. Based on the results from the numerical simulation of temperature control effect, it was proposed to adopt “early-throughput, high-flow, and short-duration” for temperature control and cracking prevention. Specifically, within 2 days after casting, cooling water at roughly 12 °C was guided in at a flow of approximately 3.5 m3/h. Within 3–7 days after casting, river water at around 17 °C was guided in at a flow rate of approximately 1.8 m3/h. After 7 days, the cooling effect can be well achieved by only using the surface flowing water for curing. According to the field monitoring data, the changes in measured temperature were basically consistent with those from numerical simulations, and detection on the temperature of the sidewall lining concrete showed that a qualification rate of >91% was satisfactorily obtained by using the proposed approach.
In recent years, as the frequency of debris flow outbreak in strong earthquake areas has increased and the scale has been expanding, in order to explore the erosion characteristics of debris flow, a lateral erosion flume model experimental device has been designed, and 18 groups of incomplete orthogonal experiments have been carried out, with a unit weight of debris flow of 1.6~2.0 g/cm3, a content of fine particles in the accumulation of 0~28.82%, and a longitudinal slope gradient of the gully of 8°~20° as variables. The results show that the erosion width, erosion depth, and erosion volume decrease with the increase in fluid bulk density and increase with the increase in gully slope. When the longitudinal slope of the gully was 16°, the sediment with 11.40% fine particles had the strongest erosion effect, indicating that more or less fine particles are not conducive to the occurrence of lateral erosion of the gully. Finally, through multi-factor variance analysis, it was found that the order of the three factors on the gully lateral erosion degree from strong to weak is: debris flow unit weight, gully slope, and accumulation grading. The analysis results further showed that the unit weight of debris flow has the greatest impact on the erosion degree of the side slope, which is consistent with the experimental results. The research results have important reference significance for revealing the mechanism of lateral erosion and improving the level of debris flow disaster prevention in strong earthquake areas.