Ta–B–C coatings were non-reactively sputter-deposited in an industrial batch coater from a single segmented rotating cylindrical cathode employing a combinatorial approach. The chemical composition, morphology, microstructure, mechanical properties, and fracture resistance of the coatings were investigated. Their mechanical properties were linked to their microstructure and phase composition. Coatings placed stationary in front of the racetrack of the target and those performing a 1-axis rotation around the substrate carousel are compared. Utilization of the substrate rotation has no significant effect on the chemical composition of the coatings deposited at the same position compared to the cathode. Whereas the morphology of coatings with corresponding chemical composition is similar for stationary as well as rotating samples, the rotating coatings exhibit a distinct multilayered structure with a repetition period in the range of nanometers despite utilizing a non-reactive process and a single sputter source. All the coatings are either amorphous, nanocomposite or nanocrystalline depending on their chemical composition. The presence of TaC, TaB, and/or TaB phases is identified. The crystallite size is typically less than 5 nm. The highest hardness of the coatings is associated with the presence of larger grains in a nanocomposite structure or formation of polycrystalline coatings. The number, density, and length of cracks observed after high-load indentation is on par with current optimized commercially available protective coatings.
1 June 2024 in Plasma Sources Science and Technology
Investigating spokes in high-power impulse magnetron sputtering discharge requires non-invasive diagnostic methods to characterise accurately spoke properties. A fast photodiode and a cylindrical Langmuir probe were employed to synchronise the moment of acquisition of the optical emission spectrum with the position of a passing spoke. This study provides statistical data analysis to bring insights into spoke characteristics in a non-reactive argon atmosphere, employing aluminium, chromium, copper, titanium, and tungsten targets. Utilising different target materials, the objective is to describe basic parameters such as shape, length, and propagation velocity of spokes and also analyse spoke inner parameters such as floating potential and spectral emission, under nearly identical experimental conditions. From the optical emission, the most prominent species within the spoke were determined. Additionally, the mechanism governing spoke movement was described using a phenomenological model.
20 October 2021 in Journal of Physics D: Applied Physics
The rotating plasma patterns, also known as ionisation zones or spokes, observed, among other discharges, in high power impulse magnetron sputtering discharge (HiPIMS) require non-invasive diagnostics favourable for a precise characterisation of their properties. In this contribution, the single-shot spatial-resolved optical emission spectroscopy of the spoke was conducted in non-reactive HiPIMS discharge using a titanium target. Investigated working pressures cover the conditions with the presence of localised, well-defined spokes. A fast photodiode and a cylindrical Langmuir probe were utilised to capture and determine the passing spoke position. These signals were synchronised with the acquisition of the optical emission spectrum by the intensified charge-coupled device detector. A large amount of single-shot data enabled the statistical analysis of the spoke. The optical emissions of argon atoms and ions and titanium atoms and ions were investigated in the passing spoke. It was found that the intensities of the spectral lines of the Ar and Ti species have the characteristic evolution for all studied spectral lines of this specific species within the spoke. The intensity evolutions are independent of the applied pressure. The evolution of the excitation temperatures determined by the Boltzmann plot method using the Ar II and Ti I and Ti II spectral lines remains constant within the spoke in the margin of standard error for all investigated pressures.
1 May 2022 in Plasma Sources Science and Technology
Understanding mechanisms behind the formation and propagation of ionisation zones, so-called spokes, have been highly important since the first observations in high power impulse magnetron sputtering discharges. To this day, however, a complete description is still lacking. This contribution gives an insight into the spokes in reactive Ar–N 2 atmosphere using titanium target. The aim of this study is to describe not only global parameters of spokes such as their shape, length and propagation velocity but also provide a description of parameters evolving over the spoke, such as floating potential and spectral emission. The measurements of the latter clearly showed which species emission is most prominent and how it changes with transition from non-reactive argon discharge towards the discharge driven in a pure nitrogen atmosphere. Implications on the gas dynamics and discharge transitions are discussed.