In order to improve fuel economy and enhance operating efficiency of fuel cell hybrid vehicles (FCHVs), fuzzy logic control (FLC) strategies are available and suggested for adoption. In this paper, the powertrain of a fuel cell hybrid vehicle is designed and the parameters of the motor, battery, and fuel cell are calculated. The FLC strategy and the power following control (PFC) strategy are designed for the studied FCHV. A secondary development for Advanced Vehicle Simulator (ADVISOR) is implemented based on the standard driving cycles, and a Chinese typical city driving cycle is imported. Simulation results demonstrate that the proposed FLC strategy is more valid and reasonable than the traditional PFC strategy. The proposed FLC strategy affects the vehicle characteristics significantly and contributes to better performance in four aspects: fuel economy, efficiency of battery and fuel cell system, battery state of charge (SOC), and battery life. Hence, the FLC strategy is more suitable for the energy management strategy for fuel cell and battery hybrid vehicles.

In this paper, a high-temperature proton exchange membrane fuel cell (HT-PEMFC) model using the polybenzimidazole membrane doped with phosphoric acid molecules is developed based on finite time thermodynamics, considering various polarization losses and losses caused by leakage current. The mathematical expressions of the output power density and efficiency of the HT-PEMFC are deduced. The reliability of the model is verified by the experimental data. The effects of operating parameters and design parameters on the output performance of the HT-PEMFC are further analyzed. The particle swarm optimization (PSO) algorithm is used for the multi-objective optimization of the power density and efficiency of the HT-PEMFC. The results show that the output performance of the optimized HT-PEMFC is improved. Then, according to the different output performance of the low-temperature proton exchange membrane fuel cell (LT-PEMFC), HT-PEMFC, and optimized HT-PEMFC, different design schemes are provided for a fuel cell vehicle (FCV) powertrain. Simulation tests are conducted under different driving cycles, and the results show that the FCV with the optimized HT-PEMFC is more efficient and consumes less hydrogen.

In this paper, a finite time thermodynamic model of high temperature proton exchange membrane fuel cell (HT-PEMFC) is established, in which the irreversible losses of polarization and leakage current during the cell operation are considered. The influences of operating temperature, membrane thickness, phosphoric acid doping level, hydrogen and oxygen intake pressure on the maximum output power density $P_{max}$ and the maximum output efficiency ${\eta }_{max}$ are studied. As the temperature rises, $P_{max}$ and ${\eta }_{max}$ will increase. The decrease of membrane thickness will increase $P_{max}$, but has little influence on the ${\eta }_{max}$. The increase of phosphoric acid doping level can increase $P_{max}$, but it has little effect on the ${\eta }_{max}$. With the increase of hydrogen and oxygen intake pressure, $P_{max}$ and ${\eta }_{max}$ will be improved. This article also obtains the optimization relationship between power density and thermodynamic efficiency, and the optimization range interval of HT-PEMFC which will provide guidance for applicable use of HT-PEMFCs.

According to finite-time thermodynamics, an irreversible high temperature proton exchange membrane fuel cell (HT-PEMFC) model is established, and the mathematical expressions of the output power, energy efficiency, exergy efficiency and ecological coefficient of performance (ECOP) of HT-PEMFC are deduced. The ECOP is a step forward in optimizing the relationship between power and power dissipation, which is more in line with the principle of ecology. Based on the established HT-PEMFC model, the maximum power density is obtained under different parameters that include operating temperature, operating pressure, phosphoric acid doping level and relative humidity. At the same time, the energy efficiency, exergy efficiency and ECOP corresponding to the maximum power density are acquired so as to determine the optimal value of each index under the maximum power density. The results show that the higher the operating temperature and the doping level, the better the performance of HT-PEMFC is. However, the increase of operating pressure and relative humidity has little effect on HT-PEMFC performance.

Since the high temperature proton exchange membrane fuel cells (HT-PEMFC) stack require a range of auxiliary equipments to maintain operating conditions, it is necessary to consider operation of related components in the design of HT-PEMFC systems. In this paper, a thermodynamic model of a vehicular HT-PEMFC system using phosphoric acid doped polybenzimidazole membrane is developed. The power distribution and exergy loss of each component are derived according to thermodynamic analysis, where the stack and heat exchanger are the two components with the greatest exergy loss. In addition, ecological functions and improvement potentials are proposed to evaluate the system performance better. On this basis, the effects of stack inlet temperature, pressure, and stoichiometric on system performance are analyzed. The results showed that the energy efficiency, exergy efficiency and net output power of the system achieved the maximum when the inlet gases temperature is 406.1 K. The system performance is better when the cathode inlet pressure is relatively low and the anode inlet pressure is relatively high. Moreover, the stoichiometry should be reduced to improve the system output performance on the basis of ensuring sufficient gases reaction in the stack.

Performance of a high-temperature proton exchange membrane fuel cell (HT-PEMFC) and the influence of different parameters on HT-PEMFC is analyzed in this study. Firstly, mathematical expression for energy efficiency, power density, exergy destruction and exergetic performance coefficient (EPC) are derived. Then, the relationship between the dimensionless power density, exergy destruction rate, exergetic performance coefficient (EPC) and energy efficiency is compared. Furthermore, the effect of flow rate, doping level, inlet pressure and film thickness are considered to evaluate the performance of HT-PEMFC. Results show that EPC not only considers exergetic loss rate to minimize exergetic loss, but also considers the power density of HT-PEMFC to maximize its power density and improve its efficiency, so EPC represents a better performance criterion. In addition, increasing inlet pressure and doping level can improve EPC and energy efficiency, respectively.