In this work, we systematically studied the deposition, characterization, and crystal structure modeling of ScAlN thin film. Measurements of the piezoelectric device’s relevant material properties, such as crystal structure, crystallographic orientation, and piezoelectric response, were performed to characterize the Sc_0.29Al_0.71N thin film grown using pulsed DC magnetron sputtering. Crystal structure modeling of the ScAlN thin film is proposed and validated, and the structure–property relations are discussed. The investigation results indicated that the sputtered thin film using seed layer technique had a good crystalline quality and a clear grain boundary. In addition, the effective piezoelectric coefficient d₃₃ was up to 12.6 pC/N, and there was no wurtzite-to-rocksalt phase transition under high pressure. These good features demonstrated that the sputtered ScAlN is promising for application in high-coupling piezoelectric devices with high-pressure stability.

This paper presents a Piezoelectric micromechanical ultrasonic transducer (PMUT) based on a Pt/ScAlN/Mo/SiO₂/Si/SiO₂/Si multilayer structure with a circular suspension film of scandium doped aluminum nitride (ScAlN). Multiphysics modeling using the finite element method and analysis of the effect of different Sc doping concentrations on the resonant frequency, the effective electromechanical coupling coefficient ($k_{\mathrm{e}\mathrm{f}\mathrm{f}}^2$) and the station sensitivity of the PMUT cell are performed. The calculation results show that the resonant frequency of the ScAlN-based PMUT can be above 20 MHz and its $k_{\mathrm{e}\mathrm{f}\mathrm{f}}^2$ monotonically rise with the increasing doping concentrations in ScAlN. In comparison to the pure AlN thin film-based PMUT, the static receiving sensitivity of the PMUT based on ScAlN thin film with 35% Sc doping concentration is up to 1.61 mV/kPa. Meanwhile, the static transmitting sensitivity of the PMUT is improved by 152.95 pm/V. Furthermore, the relative pulse-echo sensitivity level of the 2 × 2 PMUT array based on the Sc doping concentration of 35% AlN film is improved by 16 dB compared with that of the cell with the same Sc concentration. The investigation results demonstrate that the performance of PMUT on the proposed structure can be tunable and enhanced by a reasonable choice of the Sc doping concentration in ScAlN films and structure optimization, which provides important guidelines for the design of PMUT for practical applications.

Due to its higher frequency, improved impedance matching, and easy formation of array, piezoelectric micromachined ultrasonic transducer (PMUT) has drawn much attentions for application in ultrasound imaging. In this paper, PMUT based on [011] poled 0.70Pb(Mg _1/3 Nb _2/3 )O ₃ –0.30PbTiO ₃ (PMN-0.30PT) single crystal thin film was proposed and modeled by performing finite element method. Influences of different configurations of top electrode shape and bottom cavity shape on PMUT performance were studied. The investigation results show that the resonant frequency of PMN-PT-based PMUT with circular top electrode and square bottom cavity is up to 27.155 MHz. The effective electromechanical coupling coefficient ( k eff 2 ) of PMUT was up to 2.32%, which was 127% larger than that of lead zirconate titanate-based PMUT. The static transmitting sensitivity was three times enhancement compared to PMUT with square top electrode and square bottom cavity. Furthermore, acoustic field characteristics of PMUT and PMUT arrays based on PMN-PT in water were investigated. The relative pulse-echo sensitivity level of 2 × 2 PMUT array was −35 dB with the reflector at 200 μ m. The obtained results demonstrated that the proposed PMN-PT-based PMUT can achieve high frequency and large k eff 2 as well as considerable sensitivity, which is promising for application in high resolution ultrasound imaging.

In this paper, a hybrid full-wave analysis of surface acoustic wave (SAW) devices is proposed to achieve accurate and fast simulation. The partial differential equation (PDE) models of the physical system in question and graphics processing unit (GPU)-assisted hierarchical cascading technology (HCT) are used to calculate acoustic-electric characteristics of a SAW filter. The practical solid model of the radio frequency (RF) filter package is constructed in High Frequency Structure Simulator (HFSS) software and the parasitic electromagnetics of the entire package is considered in the design process. The PDE-based models of the two-dimensional finite element method (2D-FEM) are derived in detail and solved by the PDE module embedded in COMSOL Multiphysics. Due to the advantages of PDE-based 2D-FEM, it is universal, efficient and not restricted to handling arbitrary materials and crystal cuts, electrode shapes, and multi-layered substrate. Combining COMSOL Multiphysics with a user-friendly interface, a flexible way of modeling and mesh generation, it can greatly reduce the complicated process of modeling and physical properties definition. Based on a hybrid full-wave analysis, we present an example application of this approach on a TC-SAW ladder filter with 5° YX-cut LiNbO₃ substrate. Numerical results and measurements were calculated for comparison, and the accuracy and efficiency of the proposed method were verified.

Radio-frequency (RF) surface acoustic wave (SAW) resonators used as filters and duplexers are mass-produced and widely used in current mobile phones. With the numerous emergences of the diverse device structure, a universal method used for the accurate and fast simulation of the SAW resonator calls for urgent demand. However, there are too many instances where the behavior of the entire acoustic resonator cannot be characterized rapidly and efficiently due to limitations in the current computer memory and speed. This is especially true for SAW resonators configured with long arrays of inter-digital transducers (IDTs), and we have to resort to a periodic analysis. In this paper, the previously reported generalized partial differential equations (PDE) based on the two-dimensional finite element method (2D-FEM) model is extended to analysis for the periodic structure of the SAW resonator. We present model order reduction (MOR) techniques based on FEM and periodic boundary conditions to achieve a dimensionally reduced PDE model without decreasing the accuracy of computations. Examples of different SAW devices, including the regular SAW, IHP-SAW and TC-SAW resonators, are provided which shows the results of the periodic analysis compared with the experimental results of the actual resonators. The investigation results demonstrate the properties of the proposed methodology and prove its effectiveness and accuracy.

Surface acoustic wave (SAW)-based sensors have become highly valued for their use as nanosensors in industrial applications. Accurate prediction of the thermal stability is a key problem for sensor design. In this work, a numerical tool based on the finite element method combined with piezoelectric Lagrangian equations has been developed to accurately predict the thermal sensitivity characteristics of surface acoustic wave devices. Theoretical analysis for the geometric nonlinearity contributing to the frequency–temperature characteristic and material constants’ dependency on temperature were taken into consideration. The thermomechanical equilibrium equation built on the three-dimensional finite element method (3D-FEM) mesh node took mesh movement into account because thermal expansion was employed. The frequency–temperature characteristics of different SAW modes, including Rayleigh waves and leaky waves excited on a piezoelectric substrate of quartz or lithium tantalate, respectively, were calculated. The theoretical accuracy of the proposed numerical tool was verified by experiments.