Schmitt trigger (ST) circuits are widely used integrated circuit (IC) blocks with hysteretic input/output (I/O) characteristics. Like the I/O characteristics of a living neuron, STs reject noise and provide stability to systems that they are deployed in. Indeed, single-input/single-output (SISO) STs are likely candidates to be the core unit element in artificial neural networks (ANNs) due not only to their similar I/O characteristics but also to their low power consumption and small silicon footprints. This paper presents an accurate and detailed analysis and design of six widely used complementary metal-oxide-semiconductor (CMOS) SISO ST circuits. The hysteresis characteristics of these ST circuits were derived for hand calculations and compared to original design equations and simulation results. Simulations were carried out in a well-established, 0.35 μm/3.3 V, analog/mixed-signal CMOS process. Additionally, simulations were performed using a wide range of supplies and process variations, but only 3.3 V supply results are presented. Most of the new design equations provide better accuracy and insights, as broad assumptions of original derivations were avoided.
In this paper, a design for a low-noise, low-power, dual-tail dynamic latched comparator is introduced. The input referred noise is reduced through the use of a larger gain comparator dynamic amplifier; a cascode structure is adopted for such an amplifier with a direct effect on the power. To fix this problem without degrading the gain or the input referred noise, bulktuning is applied to the amplifier bias transistor. In addition, a nonconventional power-efficient latch structure is used. Designed in a 130nm UMC process, with a supply voltage of 1.2V and at a clock frequency of 1-GHz, the proposed comparator has an input-referred noise of 290μV, and an input offset voltage of 4.1mV while consuming 100μW of power with a power efficiency of 100fJ/conv. The maximum achievable frequency is 1.25GHz for a differential input 292μ V.