By combining the concepts of in situ thermotropic liquid crystalline polymer (TLCP) composites and conventional fiber composites, a recyclable and high-performance in situ hybrid polypropylene-based composite was successfully developed. The recycled hybrid composite was prepared by injection molding and grinding processes. Rheological and thermal analyses were utilized to optimize the processing temperature of the injection molding process to reduce the melt viscosity and minimize the degradation of polypropylene. The ideal temperature for blending the hybrid composite was found to be 305 °C. The influence of mechanical recycling on the different combinations of TLCP and glass fiber composites was analyzed. When the weight fraction ratio of TLCP to glass fiber was 2 to 1, the hybrid composite exhibited better processability, improved tensile performance, lower mechanical anisotropy, and greater recyclability compared to the polypropylene reinforced by either glass fiber or TLCP alone.
In this work, TLCP and GF reinforced PP have been recycled and TLCP/PP demonstrates superior recyclability over GF/PP due to the generation of fibrils during mold filling steps. The fiber shortening has a major impact on mechanical properties of GF/PP, which is induced by repeated injection molding and grinding. The thermal properties of TLCP/PP and GF/PP have been analyzed by DSC. The results show that injection molding and grinding does not impact the glass transition temperature, melting temperature and crystallinity of recycled composites.In continuation of this work, the influence of mechanical recycling on rheological, thermal stability and thermo-mechanical properties will be analyzed in order to gain full understanding about the impact of recycling on the various properties of TLCP and GF composites.
In this paper, high-performance thermotropic liquidcrystalline polymer (TLCP)/polypropylene (PP) and glassfiber (GF)/PP composites were prepared by the injectionmolding process. Mechanical recycling of TLCP/PP andGF/PP composites consisted of grinding of the injectionmolded specimens and further injection molding of thegranules. The influence of mechanical recycling onmechanical and thermal properties was investigated. In situTLCP/PP maintains tensile modulus and strength duringthe recycling process, indicating the regeneration ofpolymeric fibrils at each reprocessing stage. GF/PPcomposite exhibits deterioration of mechanical propertiesafter recycling because of fiber breakage during processing,which is a very common issue on reusing glass or carbonfiber reinforced composites. The experimental resultsreveal that the TLCP/PP composite has better recyclabilitythan GF/PP.
TLCP reinforced composite has been widely used in different application due to their lightweight, high strength and stiffness, chemical resistance and great recyclability. In this work, TLCP reinforced nylon composite has been developed for using in 3D printing process. TLCP reinforced nylon filaments were generated using dual extrusion, a process by which two single crew extruders are used to individually process two plastics at their optimal processing temperature and pump them directly into a T junction in which a reinforcement material is dispersed throughout a matrix material via a static mixer, then extruded out of a nozzle and cooled in a water bath. Different pumping speeds were controlled via individual gear pumps connected to each extruder. Pump speeds were adjusted to produce 20 wt% TLCP/nylon composite. The filament was then collected and prepared for use in 3D printing.