A simple and versatile method is described to obtain polycaprolactone (PCL) porous membranes, consisting of fibers prepared by electrospinning. The surface of the fibers is modified by grafting poly(N-isopropylacrylamide) (PNIPAM) brushes by surface-initiated atom-transfer radical polymerization (SI-ATRP). PCL mixtures, featuring Br end-functionalized and nonfunctionalized polymer, are used to enable SI-ATRP. Wettability at variable temperatures is governed by the lower critical solution temperature (LCST) of PNIPAM as contact angle and swelling ratio measurements demonstrate. Because of the PNIPAM LCST, the membranes show a variation of pore size with temperature, which is accompanied by flux changes of water permeating the membranes. Temperature gated separation is demonstrated using oil/water emulsions at 1 bar pressure. Typical separation efficiencies are 92% and 25% at 25 and 50 °C, respectively. Employment of anionic and neutral surfactants shows that the separation efficiency also depends on the interaction between the membranes and the emulsions.
16 June 2008 in Journal of Polymer Science Part B: Polymer Physics
A super-hydrophobic 2024 aluminum alloy surface with multi-scale hierarchical flower-like boehmite (γ-AlOOH) structure has been fabricated via a facile hydrothermal approach. The different morphologies of the γ-AlOOH films were totally controlled by the preparation conditions for crystal growth, such as reaction solution and time. The morphology and structure of the films were characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The super-hydrophobicity can be attributed to both the rough multi-scale structural boehmite coating and surface enrichment of low surface energy with the chemical vapor deposition of 1H,1H,2H,2H-perfluorodecyltriethoxysilane (POTS). The resulting super-hydrophobic surface exhibits a water contact angle of 155° and a sliding angle of about 5°. The corrosion behavior was investigated with potentiodynamic polarization measurements and it was found that the super-hydrophobic coating considerably improved the corrosion resistant performance of aluminum alloy.