Fish sense water motions with their lateral line. The lateral line is a sensory system that contains up to several thousand mechanoreceptors, called neuromasts. Neuromasts occur freestanding on the skin and in subepidermal canals. We developed arrays of flow sensors based on lateral line canal neuromasts using a biomimetic approach. Each flow sensor was equipped with a PDMS (polydimethylsiloxane) lamella integrated into a canal system by means of thick- and thin-film technology. Our artificial lateral line system can estimate bulk flow velocity from the spatio-temporal propagation of flow fluctuations. Based on the modular sensor design, we were able to detect flow rates in an industrial application of tap water flow metering. Our sensory system withstood water pressures of up to six bar. We used finite element modeling to study the fluid flow inside the canal system and how this flow depends on canal dimensions. In a second set of experiments, we separated the flow sensors from the main stream by means of a flexible membrane. Nevertheless, these biomimetic neuromasts were still able to sense flow fluctuations. Fluid separation is a prerequisite for flow measurements in medical and pharmaceutical applications.
3 May 2017 in Journal of The Royal Society Interface
Fishes sense weak water motion using the lateral line. Among the thousands of described fish species, this organ may differ in size, shape and distribution of individual mechanoreceptors or lateral line canals. The reasons for this diversity remain unclear, but are very likely related to habitat preferences. To better understand the performance of the organ in natural hydrodynamic surroundings, various three-dimensional imaging datasets of the cephalic lateral line were gathered usingLeuciscus idusas representative freshwater teleost. These data are employed to simulate hydrodynamic phenomena around the head and within lateral line canals. The results show that changes in canal dimensions alter the absolute stimulation amplitudes, but have little effect on the relation between bulk water flow and higher frequency signals. By contrast, depressions in the skin known as epidermal pits reduce bulk flow stimulation and increase the ratio between higher-frequency signals and the background flow stimulus.
A major question in stream ecology is how invertebrates cope with flow. In aquatic gastropods, typically, larger and more globular shells with larger apertures are found in lotic (flowing water) versus lentic (stagnant water) habitats. This has been hypothetically linked to a larger foot, and thus attachment area, which has been suggested to be an adaptation against risk of dislodgement by current. Empirical evidence for this is scarce. Furthermore, these previous studies did not discuss the unavoidable increase in drag forces experienced by the snails as a consequence of the increased cross sectional area. Here, using Potamopyrgus antipodarum as a study model, we integrated computational fluid dynamics simulations and a flow tank experiment with living snails to test whether 1) globular shell morphs are an adaptation against dislodgement through lift rather than drag forces, and 2) dislocation velocity is positively linked to foot size, and that the latter can be predicted by shell morphology. The drag forces experienced by the shells were always stronger compared to the lift and lateral forces. Drag and lift forces increased with shell height but not with globularity. Rotating the shells out of the flow direction increased the drag forces, but decreased lift. Our hypothesis that the controversial presence of globular shells in lotic environments could be explained by an adaptation against lift rather than drag forces was rejected. The foot size was only predicted by the size of the shell, not by shell shape or aperture size, showing that the assumed aperture/foot area correlation should be used with caution and cannot be generalized for all aquatic gastropod species. Finally, shell morphology and foot size were not related to the dislodgement speed in our flow tank experiment. We conclude that other traits must play a major role in decreasing dislodgement risk in stream gastropods, e.g., specific behaviours or pedal mucus stickiness. Although we did not find globular shells to be adaptations for reducing dislodgement risk, we cannot rule out that they are still flow-related adaptations. For instance, globular shells are more crush-resistant and therefore perhaps adaptive in terms of diminishing damage caused by tumbling after dislodgement or against lotic crush-type predators.
15 September 2016 in Journal of Experimental Biology
Fluid motion and pressure fields induced by vibrating spheres are frequently used to investigate the function of biological mechanosensory systems and artificial sensors. The calibration of the sphere motion amplitude (displacement, velocity, acceleration), time course and vibration direction often demands expensive equipment. To mitigate this requirement, we have developed a high-quality, low-cost device that we term a ‘Smart Mechanical Dipole’. It provides real-time measurement of sphere acceleration along three axes and can be used to obtain an accurate stimulation trace. We applied digital filtering to equalize the frequency response of the vibrating sphere, which also reduced unwanted amplitude and frequency changes in the hydrodynamic signal. In addition, we show that the angular orientation of the rod to which the sphere was attached, i.e. axial versus transverse, but not the immersion depth of the sphere affected sphere vibration behavior.
Microplastic (MP) fibres from washing machines are a major source of environmental pollution, yet, existing domestic filtration solutions are prone to clogging and have limited retention. Inspired by the gill arch system of ram-feeding fishes, we developed a bio-inspired filter that employs semi-cross-flow filtration with a conical filter element geometry, periodic self-cleaning and optimised inflow. Laboratory tests show that the fish-inspired filter (FiF) retains up to 99.6% of MP test fibres. Clogging is reduced by collecting up to 85% of the fibres outside the FiF through a periodic cleaning mechanism. CFD and flow tank experiments demonstrate that filtration performance is strongly influenced by the angle of attack and inlet geometry. The FiF achieves a low concentrate volume (∼5%), increasing yield and minimising post-treatment. Our findings highlight the potential of bio-inspired filtration mechanisms for engineering applications such as washing machines requiring high efficiency and modular design.