Suspension feeders (SFs) evolved a high diversity of mechanisms, sometimes with remarkably convergent morphologies, to retain plankton, detritus and man-made particles with particle sizes ranging from less than 1 µm to several centimetres. Based on an extensive literature review, also including the physical and technical principles of solid–liquid separation, we developed a set of 18 ecological and technical parameters to review 35 taxa of suspension-feeding Metazoa covering the diversity of morphological and functional principles. This includes passive SFs, such as gorgonians or crinoids that use the ambient flow to encounter particles, and sponges, bivalves or baleen whales, which actively create a feeding current. Separation media can be flat or funnel-shaped, built externally such as the filter houses in larvaceans, or internally, like the pleated gills in bivalves. Most SFs feed in the intermediate flow region of Reynolds number 1–50 and have cleaning mechanisms that allow for continuous feeding. Comparison of structure–function patterns in SFs to current filtration technologies highlights potential solutions to common technical design challenges, such as mucus nets which increase particle adhesion in ascidians, vanes which reduce pressure losses in whale sharks and changing mesh sizes in the flamingo beak which allow quick adaptation to particle sizes.
9 October 2024 in Environmental Microbiology Reports
Microplastics (MPs) are released into the environment through human activities and are transported by rivers from land to sea. Biofilms, which are ubiquitous in aquatic ecosystems such as rivers, may play an essential role in the fate of MPs and their ingestion by biofilm protists. To assess this, biofilms were naturally grown on clay tiles in the River Rhine, Germany, and analysed in a combined field and laboratory study. Compared to the ambient river water, biofilms grown for 6, 12, and 18 months in the River Rhine contained up to 10 times more MPs. Between 70% and 78% of all MPs were smaller than 50 μm. In laboratory experiments, clay tiles covered with 1‐month‐old naturally grown biofilm retained 6–12 times more MPs than clay tiles without biofilm coverage. Furthermore, the ingestion of MPs of 6 and 10 μm by the ciliate Stentor coeruleus was confirmed, and a positive correlation between ingestion rates and ambient MP concentrations was found. The results are relevant for particle transport models in riverine systems, risk assessment of MPs regarding their distribution and fate in the aquatic environment, and the effects of MPs on micro‐ and macroorganisms.
Biomimetics is a well-known approach for technical innovation. However, most of its influence remains in the academic field. One option for increasing its application in the practice of technical design is to enhance the use of the biomimetic process with a step-by-step standard, building a bridge to common engineering procedures. This article presents the endeavor of an interdisciplinary expert panel from the fields of biology, engineering science, and industry to develop a standard that links biomimetics to the classical processes of product development and engineering design. This new standard, VDI 6220 Part 2, proposes a process description that is compatible and connectable to classical approaches in engineering design. The standard encompasses both the solution-based and the problem-driven process of biomimetics. It is intended to be used in any product development process for more biomimetic applications in the future.
Microplastic (MP) fibres from washing machines are a major source of environmental pollution, yet, existing domestic filtration solutions are prone to clogging and have limited retention. Inspired by the gill arch system of ram-feeding fishes, we developed a bio-inspired filter that employs semi-cross-flow filtration with a conical filter element geometry, periodic self-cleaning and optimised inflow. Laboratory tests show that the fish-inspired filter (FiF) retains up to 99.6% of MP test fibres. Clogging is reduced by collecting up to 85% of the fibres outside the FiF through a periodic cleaning mechanism. CFD and flow tank experiments demonstrate that filtration performance is strongly influenced by the angle of attack and inlet geometry. The FiF achieves a low concentrate volume (∼5%), increasing yield and minimising post-treatment. Our findings highlight the potential of bio-inspired filtration mechanisms for engineering applications such as washing machines requiring high efficiency and modular design.
Improper waste disposal has led to a rising accumulation of litter in aquatic environments, but long-term surveys of riverine macrolitter particles are rare. Here we report an analysis of continuous in-river monitoring over 16 months, using a custom-made physical-interception litter trap in the Rhine River, one of Europe’s largest rivers. In collaboration with citizen scientists, we collected 20,339 floating macrolitter items larger than 1 cm that we classified according to international standards. We find that private consumers are the largest source of macrolitter at 56.4%. Plastics comprised 69.7% of macrolitter by particle number but only 14.8% by weight, underscoring the relevance of non-plastic materials. Based on our data, we estimate the annual macrolitter transport towards the North Sea to amount to 27 to 42.2 million items, or 3,010.5 to 4,707.5 t in the Rhine River, which significantly exceeds previous estimates. Macrolitter abundance fluctuated by a factor of 41 between biweekly samples and was higher at times of rising discharge. As such, we suggest that long-term monitoring is essential, and river discharge forecasts could serve as a predictor to guide clean-up efforts.
25 June 2025 in Journal of The Royal Society Interface
Innovative filtration systems are essential to enhance air quality or improve aerosol sampling for analysis, while addressing challenges such as high energy consumption, clogging and inefficiencies in capturing a wide range of particle diameters. Bio-inspiration provides novel design strategies by translating natural particle separation mechanisms (PSMs) into more efficient, adaptive and sustainable filtration technologies. This review systematically identifies six organismic groups as biological models that use distinct particle capture mechanisms to retain airborne particles for nutrition, reproduction and protection. Filtration-based PSMs in air, such as insect spiracles, hornet silk caps and spider webs, employ dead-end filtration with varying mesh structures to either purify air or capture prey. Non-filtration PSMs, including nasal cavities and wind pollination, rely on passive aerodynamic mechanisms such as impaction, interception and settling for particle retention. Flow regime control is crucial for non-filtration PSMs, where structures like nasal turbinates and pine cone surfaces optimize local airflows. Adhesive mechanisms, found in spider webs and nasal mucus, improve particle attachment. By mapping these principles to aerosol filtration challenges—such as particle adhesion, flow optimization and efficient removal of submicrometre particles—this review identifies promising pathways for bio-inspired aerosol filters in environmental monitoring, industrial hygiene and public health.