Grounded in the auspicious horizons of geological polymers as alternative replacements for Portland cement and aligned with the national endeavor of constructing an ecological civilization and harnessing solid waste as a resource, this study delves into the integration of nanostructured calcium carbonate (CaCO3) into geological polymers derived from fly ash and manganese slag. Employing a comprehensive methodology involving modalities, such as X-ray diffraction, scanning electron microscopy, and attenuated total reflectance Fourier-transform infrared spectroscopy, the influence of nano-CaCO3 on the compressive strength, pore architecture, and polymerization degree of geological polymers is meticulously unveiled. The outcomes reveal that nano-CaCO3 adeptly infiltrates the intricate microporous architecture of geological polymers, thereby providing a compact and intrinsically reinforcing matrix, ultimately endowing a marked increase in compressive strength. The assimilation of nano-CaCO3 correlates conspicuously with an increase in monomeric calcium concentrations, thereby catalyzing and expediting the formation of polymeric assemblages within the system, which in turn accelerates the progression of geological polymerization. This catalytic effect augments the intricate three-dimensional lattice-like gel structures, consequently orchestrating a substantial amelioration in mechanical attributes. When the dosage of nano-CaCO3 was 3.5%, sodium silicate was 10%, and NaOH was 12%, the integrated performance of fly ash–Mn slag geopolymer was optimal. Specifically, the 28-day compressive strength reached 25.6 MPa, and the compressive strength of the weathering performance test increased by 8.31%. The polymer achieved 96.77% curing of Mn, and it was non-radioactive. Thus, the prepared geopolymers are safe and reliable and support the subsequent development of nanomaterial activators.
Based on the replacement of natural sand by recycled fine aggregate of construction waste, the comprehensive physical properties and hydration mechanism of graphene oxide (GO) modified recycled cement-based composites (RCBC) were studied. The RCBC was prepared by ultrasonic dispersion GO and vibration stirring. The results show that the flexural and compressive strength of the RCBC modified by 0.03%GO at 7d age increase by 16% and 21% respectively, the flexural strength and compressive strength of RCBC modified by 0.02% GO at 28d age increase by 13.7% and 13.6% respectively. Good weather resistance and the freeze-thaw performance at age, Cl- contents is less than 0.06%. The radioactive detection results of GO/RCBC is IRa = 0.08 and Ir = 0.15, which belongs to Class A building materials. The hydration mechanism of the prepared GO/RCBC was studied by XRD, TG-DTA, SEM, and other means. The results show that GO promotes the formation of ettringite (AFt), calcium silicate hydrate (C-S-H) and the transformation of AFt and calcium hydroxide (CH) crystal form, thus improving the comprehensive properties of RCBC.
Ce3+ doped TiO2 thin films were prepared on ITO conductive glass by sol-gel method and dip-coating method using tetrabutyltitanate and glacial acetic acid as raw materials and adding cerium nitrate into cerium. The Ce3+ doped TiO2 powder was characterized by XRD, TG-DTA and SEM. The electrochromic properties of the films were tested by electrochemical workstation. The films were tested by UV-Vis spectrophotometer. Results show that the concentration of doped Ce ions is 2%, and the electrochromic properties of the films are improved greatly. The more the doping is, the more significant the effect on the electrochromic properties of the films is.
Using sol-gel method and dipping coating process, Tetrabutyl titanate and glacial acetic acid were added to the solvent absolute ethanol and boric acid, deionized water, nitric acid and other raw materials were added. B3+ doped TiO2 film was successfully prepared on ITO glass, The optical properties and electrochromic properties of B3+ doped TiO2 films were studied by means of TG-DTA, XRD, UV-Vis, SEM, and electrochemical workstation. The results show that the spectral control range of B3+ doped TiO2 film is significantly improved, The electrochemical cycling stability of the film is also improved. When the volume fraction of B3+ is 9%, the electrochromic effect is best.
Recycled rubber aggregate (RRA) made from ground tire rubber has been promoted for its light weight and shock resistance. The high alkalinity of alkali-activated slag mortar has a modification effect on the surface of RRA. This paper studies the performance of alkali-activated slag mortar using RRA as aggregate (RASM), which has significance for applications in low-carbon building materials. The orthogonal test analysis method was used to analyze the significance and correlation of the main variables of the test. The dynamic energy absorption capacity and crushing state of RASM under the synergistic effect of various factors were studied using the separating Hopkinson pressure bar (SHPB) test system. The energy absorption characteristics and failure modes of RASM were analyzed by SEM and microscopic pore characterization. The results show that the increase of the alkali equivalent of the mix ratio will increase the peak value of the absorption energy of the specimen. When the size of the RRA is between 0.48 mm~0.3 mm, the dynamic energy absorption of the specimen will reach its peak value. Although the increase in the total volume of RRA will reduce the energy absorption capacity of RASM specimens, its crack resistance is enhanced.