Grounded in the auspicious horizons of geological polymers as alternative replacements for Portland cement and aligned with the national endeavor of constructing an ecological civilization and harnessing solid waste as a resource, this study delves into the integration of nanostructured calcium carbonate (CaCO3) into geological polymers derived from fly ash and manganese slag. Employing a comprehensive methodology involving modalities, such as X-ray diffraction, scanning electron microscopy, and attenuated total reflectance Fourier-transform infrared spectroscopy, the influence of nano-CaCO3 on the compressive strength, pore architecture, and polymerization degree of geological polymers is meticulously unveiled. The outcomes reveal that nano-CaCO3 adeptly infiltrates the intricate microporous architecture of geological polymers, thereby providing a compact and intrinsically reinforcing matrix, ultimately endowing a marked increase in compressive strength. The assimilation of nano-CaCO3 correlates conspicuously with an increase in monomeric calcium concentrations, thereby catalyzing and expediting the formation of polymeric assemblages within the system, which in turn accelerates the progression of geological polymerization. This catalytic effect augments the intricate three-dimensional lattice-like gel structures, consequently orchestrating a substantial amelioration in mechanical attributes. When the dosage of nano-CaCO3 was 3.5%, sodium silicate was 10%, and NaOH was 12%, the integrated performance of fly ash–Mn slag geopolymer was optimal. Specifically, the 28-day compressive strength reached 25.6 MPa, and the compressive strength of the weathering performance test increased by 8.31%. The polymer achieved 96.77% curing of Mn, and it was non-radioactive. Thus, the prepared geopolymers are safe and reliable and support the subsequent development of nanomaterial activators.
Tetracycline (TC) and arsenic contaminants are two main pollutants in aquaculture and livestock husbandry, and they have drawn worldwide attention. To address this issue, a novel N-doped carbon@magnesium silicate (CMS) was fabricated via a facile and low-cost hydrothermal route, adopting glucose and ammonia as C and N sources, respectively. The synergetic combination of carbon and magnesium silicate makes CMS possess a high surface area of 201 m2/g and abundant functional groups. Due to the abundant C- and N-containing functional groups and Mg-containing adsorptive sites, the maximum adsorption capacity values of CMS towards As(V) and TC are 498.75 mg/g and 1228.5 mg/g, respectively. The type of adsorption of As(V) and TC onto CMS is monolayer adsorption. An adsorption kinetic study revealed that the mass transfer and intraparticle process dominates the sorption rate of As(V) and TC adsorption onto CMS, respectively. Various functional groups synthetically participate in the adsorption process through complexion, π–π EDA interactions, and hydrogen bonds. This work provides a one-step, low-cost route to fabricate a N-doped carbonaceous adsorbent with a high surface area and abundant functional groups, which has great potential in the application of practical sewage treatment.
29 December 2025 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Efficient removal of tetracycline (TC) from antibiotic-contaminated wastewater remains a significant challenge. In this study, a nitrogen-doped carbon modified cobalt ferrite (C@CoFe2O4, CF) composite was synthesized via a one-step hydrothermal method, and its adsorption–catalysis dual-function performance was systematically evaluated. Structural characterization revealed that CoFe2O4 nanoparticles were locally encapsulated by an N-doped carbonaceous layer, providing a high specific surface area and abundant nitrogen-containing active sites. Under optimized conditions, the CF-3/PMS system achieved 93.44% TC removal within 45 min, while CF-3 exhibited a maximum adsorption capacity of 486.5 mg·g−1. Radical quenching experiments suggested that singlet oxygen (1O2) and superoxide radicals (O2•−) played major roles in TC oxidation, while sulfate radicals (SO4•−) and hydroxyl radicals (HO•) also contributed, indicating the coexistence of radical and non-radical oxidation pathways. TC adsorption was driven by surface complexation, π–π electron donor–acceptor interactions, and hydrogen bonding. The enhanced TC removal performance may arise from the cooperative contributions of N-containing carbon sites, accessible Co/Fe-containing regions, and interfacial electronic interactions, which promote TC enrichment and PMS-mediated oxidation. This work provides a promising strategy for designing bifunctional materials for antibiotic wastewater treatment.