For high-resolution imaging implementations, the spacecraft attitude tracking control accuracy is crucial to determining the imaging quality. This investigation addresses the attitude tracking issue of imaging spacecraft subject to system uncertainties (unavailable inertia tensor, unexpected disturbances, and actuator faults). An adaptive sliding mode control (SMC) strategy is proposed to guarantee practical fixed-time closed-loop stability even in the presence of system uncertainties. Unlike existing methodologies, the sliding mode surface is developed to satisfy a novel sufficient condition of fixed-time stability. The sliding manifold design also circumvents the unwinding phenomenon arising in quaternion representations. Particularly, this controller is developed to generate a smooth control profile by using a new parameter update law. Rigorous Lyapunov analyses are further employed to ensure the fixed-time closed-loop stability irrespective of the system initial states. Finally, numerical examples are performed to demonstrate the feasibility and highlight the inherent features of the derived control law.
22 November 2019 in IEEE Transactions on Aerospace and Electronic Systems
This paper addresses the coupled orbit-attitude tracking problem using low-thrust propulsion while aiming to minimize on-board spacecraft system communication. An adaptive controller is proposed by employing an event-triggered control and an extended-state-observer, where a simple strategy to tune the observer parameters is provided. Moreover, the event-triggering strategy updates and allocates the control signal to the thrusters at prescribed discrete events and is shown to significantly reduce the data-rate requirement. Finally, the performance of the controller is illustrated through numerical examples.
This paper addresses the guidance and tracking problem for a rigid-spacecraft using two reaction wheels (RWs). The guidance problem is formulated as an optimal control problem on the special orthogonal group SO(3). The optimal motion is solved analytically as a function of time and is used to reduce the original guidance problem to one of computing the minimum of a nonlinear function. A tracking control using two RWs is developed that extends previous singular quaternion stabilisation controls to tracking controls on the rotation group. The controller is proved to locally asymptotically track the generated reference motions using Lyapunov's direct method. Simulations of a 3U CubeSat demonstrate that this tracking control is robust to initial rotation errors and angular velocity errors in the controlled axis. For initial angular velocity errors in the uncontrolled axis and under significant disturbances the control fails to track. However, the singular tracking control is combined with a nano-magnetic torquer which simply damps the angular velocity in the uncontrolled axis and is shown to provide a practical control method for tracking in the presence of disturbances and initial condition errors.
Dielectric elastomer actuators exert strain due to an applied electric field. With advantageous properties such as high efficiency and their light weight, these actuators are attractive for a variety of applications ranging from biomimetic robots, medical prosthetics to conventional pumps and valves. The performance and reliability however, are limited by dielectric breakdown which occurs primarily from localized defects inherently present in the polymer film during actuation. These defects lead to electric arcing, causing a short circuit that shuts down the entire actuator and can lead to actuator failure at fields significantly lower than the intrinsic strength of the material. This limitation is particularly a problem in actuators using large-area films. Our recent studies have shown that the gap between the strength of the intrinsic material and the strength of large-area actuators can be reduced by electrically isolating defects in the dielectric film. As a result, the performance and reliability of dielectric elastomers actuators can be substantially improved.
5 December 2018 in IEEE Transactions on Automatic Control
This paper presents an approach to motion planning for left-invariant kinematic systems defined on the 6-D frame bundles of symmetric spaces of constant cross-sectional curvature. A covering map is used to convert the original differential equation into two coupled equations each evolving on a 3-D Lie group. These lower dimensional systems lend themselves to a minimal global representation that avoid singularities associated with the use of exponential coordinates. Open-loop and closed-loop kinematic control problems are addressed to demonstrate the use of this mapping for analytical and numerical based motion planning methods. The approach is applied to a spacecraft docking problem using two different types of actuation: (i) a fully-actuated continuous low-thrust propulsion system and (ii) an under-actuated single impulsive thruster and reaction wheel system.