Benedikt Niessen

Mr. Benedikt Niessen

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2020 in Metals
Verified
Journal Article
Open access
PDF file
JBJoerg Bellmann
Joerg Bellmann
JLJörn Lueg-Althoff
Jörn Lueg-Althoff
BNBenedikt Niessen
Benedikt Niessen
MBMarcus Böhme
Marcus Böhme
ESEugen Schumacher
Eugen Schumacher
SBStefan Böhm
Stefan Böhm
Collision welding processes are accompanied by the ejection of a metal jet, a cloud of particles (CoP), or both phenomena, respectively. The purpose of this study is to investigate the formation, the characteristics as well as the influence of the CoP on weld formation. Impact welding experiments on three different setups in normal ambient atmosphere and under vacuum-like conditions are performed and monitored using a high-speed camera, accompanied by long-term exposures, recordings of the emission spectrum, and an evaluation of the CoP interaction with witness pins made of different materials. It was found that the CoP formed during the collision of the joining partners is compressed by the closing joining gap and particularly at small collision angles it can reach temperatures sufficient to melt the surfaces to be joined. This effect was proved using a tracer material that is detectable on the witness pins after welding. The formation of the CoP is reduced with increasing yield strength of the material and the escape of the CoP is hindered with increasing surface roughness. Both effects make welding with low-impact velocities difficult, whereas weld formation is facilitated using smooth surfaces and a reduced ambient pressure under vacuum-like conditions. Furthermore, the absence of surrounding air eases the process observation since exothermic oxidation reactions and shock compression of the gas are avoided. This also enables an estimation of the temperature in the joining gap, which was found to be more than 5600 K under normal ambient pressure.

8 September 2020 in Metals
Verified
Journal Article
Open access
PDF file
BNBenedikt Niessen
Benedikt Niessen
ESEugen Schumacher
Eugen Schumacher
JLJörn Lueg-Althoff
Jörn Lueg-Althoff
JBJoerg Bellmann
Joerg Bellmann
MBMarcus Böhme
Marcus Böhme
PGPeter Groche
Peter Groche
Collision welding is a high-speed joining technology based on the plastic deformation of at least one of the joining partners. During the process, several phenomena like the formation of a so-called jet and a cloud of particles occur and enable bond formation. However, the interaction of these phenomena and how they are influenced by the amount of kinetic energy is still unclear. In this paper, the results of three series of experiments with two different setups to determine the influence of the process parameters on the fundamental phenomena and relevant mechanisms of bond formation are presented. The welding processes are monitored by different methods, like high-speed imaging, photonic Doppler velocimetry and light emission measurements. The weld interfaces are analyzed by ultrasonic investigations, metallographic analyses by optical and scanning electron microscopy, and characterized by tensile shear tests. The results provide detailed information on the influence of the different process parameters on the classical welding window and allow a prediction of the different bond mechanisms. They show that during a single magnetic pulse welding process aluminum both fusion-like and solid-state welding can occur. Furthermore, the findings allow predicting the formation of the weld interface with respect to location and shape as well as its mechanical strength.

7 August 2019 in Materialwissenschaft und Werkstofftechnik
Verified
Journal Article
Closed access
PDF file
PGP. Groche
P. Groche
BNBenedikt Niessen
Benedikt Niessen
CPC. Pabst
C. Pabst


Verified
Journal Article
Open access
PDF file
PGPeter Groche
Peter Groche
BNBenedikt Niessen
Benedikt Niessen
Collision welding is a joining technology that is based on the high-speed collision and the resulting plastic deformation of at least one joining partner. The ability to form a high-strength substance-to-substance bond between joining partners of dissimilar metals allows us to design a new generation of joints. However, the occurrence of process-specific phenomena during the high-speed collision, such as a so-called jet or wave formation in the interface, complicates the prediction of bond formation and the resulting bond properties. In this paper, the collision welding of aluminum and copper was investigated at the lower limits of the process. The experiments were performed on a model test rig and observed by high-speed imaging to determine the welding window, which was compared to the ones of similar material parings from former investigation. This allowed to deepen the understanding of the decisive mechanisms at the welding window boundaries. Furthermore, an optical and a scanning electron microscope with energy dispersive X-ray analysis were used to analyze the weld interface. The results showed the important and to date neglected role of the jet and/or the cloud of particles to extract energy from the collision zone, allowing bond formation without melting and intermetallic phases.

2 July 2019 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
BNBenedikt Niessen
Benedikt Niessen
PGPeter Groche
Peter Groche
Collision welding is a promising material closed joining process for metals without any additional heat. Although the process is already industrially applied, the working mechanisms of bond formation have not yet been completely understood. Less process understanding results in lower process reliability. Therefore, the design of new component joints and welding processes has to be carried out mostly experimentally with a high effort in order to ensure a high reliability. In this paper, the formation of the weld interface is investigated for copper-copper-joints, which has interesting applications in the field of future electro mobility. Especially the full formation of the weld interface is critical in lower energy welding processes like electromagnetic pulse welding. For this purpose, welds with different collision angles and impact velocities were produced by a purely mechanical driven test rig and observed by a high speed camera. Subsequently, the welded areas were analyzed by an ultrasonic scanner. The results show a dependence of the size of the welded area on the collision angle and the impact velocity. It is shown, that the impact velocity correlates with the available energy for the bond formation. Moreover different types of weld interfaces can be identified from the measurements.