Temperature sensitivity characteristics of bitumen can be evidently influenced by modifier types and natural aging processes. Many types of modifiers have been used to improve the temperature sensitivity performance of bitumen, but their effects are different. Therefore, different bitumen specimens as well as SBS/CRP (Styrene-butadiene-styrene polymer/crumb rubber powder)-modified bitumen were prepared and the temperature sensitivity characteristics of bitumen after different aging processes were analyzed in this study. A dynamic rheological property test and performance test at low temperature were carried out to analyze temperature sensitivity and low temperature rheological properties of bitumen. An infrared spectrum test was adopted to study the effect of functional groups under different aging process on the properties of bitumen. The relationship between macroscopic properties and microstructures of bitumen was analyzed. The results show that SBS/CRP-modified bitumen has a strong anti-aging ability in that its flexibility and structure remain in a good condition after long-term aging. The aging process has no significant effect on SBS/CRP-modified bitumen. SBS/CRP-modified bitumen has an excellent low-temperature relaxation ability and low-temperature crack resistance. In contrast to original bitumen and SBS-modified bitumen, the temperature sensitivity performance of SBS/CRP-modified bitumen is evidently enhanced. The physical blending effect is dominant in the bitumen modified process and there is no evident chemical reaction between bitumen and crumb rubber powder. SBS/CRP-modified bitumen is recommended for wide use in plateau areas with ultraviolet and cold surroundings.
1 September 2017 in Journal of Materials in Civil Engineering
In this paper, two interface treatments were applied to improve the interface condition, and the shear failure test and repeated shear test were conducted to evaluate the bonding conditions. It is found that the interface shear strength and horizontal shear reaction modulus are largest for the roughening-treated specimen, meaning the improvement on the interface bonding condition of roughening treatment is the best. For all three kinds of specimens, both the horizontal shear reaction modulus and the interface bonding percentage decrease with the loading cycles, meaning the interface bonding condition becomes worse due the repeated loading effects. Compared with the untreated and emulsified asphalt-treated specimen, the roughening-treated specimen has the largest shear reaction modulus, the largest bonding percentage, and the smallest modulus reduction ratio, meaning the antidecay property of roughening treatment is the best. However, even with the best treatment of roughening, the interface is not good enough to ensure the full bonding condition.
19 February 2017 in DEStech Transactions on Engineering and Technology Research
In order to cure asphalt pavement distresses caused by expansive soil subgrade, a new maintenance technology based on trenchless technology with the macromolecule polymer grouting was adopted. The technique principle of the macromolecule polymer grouting, grouting construction method, cold patch repair technology, and the evaluation of engineering treatment were studied. The results showed that the macromolecule polymer grouting technology is feasible used in asphalt pavement maintenance.
19 February 2017 in DEStech Transactions on Engineering and Technology Research
Mechanical property of cement mortar is closely related to polymer modifier type. Four kinds of polymer latex including Chloroprene Rubber (CR), Styrene Butadiene (SBR), Styrene Acrylic (SA) and Polyvinyl Acetate (PVAc) were selected to prepare the modified cement mortar in this study. Mechanical behavior of modified cement mortar was evaluated by flexural strength, Compressive Strength and Tensile Strength, respectively. The micro-morphology of modified cement mortar was observed by scanning electron microscope (SEM), which was useful to analyze the modification mechanism. The results show that the SBR and PVAc latex can effectively improve the flexural strength of cement mortar, while the compressive strength is reduced slightly. Tensile strength of modified cement mortar was increased, especially the PVAc latex modified cement mortar.