Homoepitaxial growth of high structural quality and high-purity thick gallium nitride layers by crystallization from vapor phase (hydride vapor phase epitaxy (HVPE)) on 1, 1.5, and 2 inch substrates obtained by a solution (ammonothermal) growth method is presented. Advantages and disadvantages of both growth technologies are described in detail. Structural, optical, electrical, and thermal properties of gallium nitride grown from the vapor phase are demonstrated and compared to properties of ammonothermally grown material. It is shown that a synergy of these two methods can create new opportunities for an efficient production of bulk gallium nitride crystals and then substrates. It is also shown that free-standing (products of slicing procedures) gallium nitride crystals obtained from growth by vapor phase on ammonothermal substrates can be successfully used as seeds for the next growth process by both discussed methods. Factors limiting HVPE and making it a ‘wafer to wafer’ technology are presented, clarified, and analyzed. Intentional introduction of silicon to growth of gallium nitride by HVPE and crystals with a high free carrier concentration and high structural quality are demonstrated. First electronic and optoelectronic devices fabricated on the free-standing gallium nitride substrates are shown.
It is well known that ion implantation is one of the basic tools for semiconductor device fabrication. The implantation process itself damages, however, the crystallographic lattice of the semiconductor. Such damage can be removed by proper post-implantation annealing of the implanted material. Annealing also allows electrical activation of the dopant and creates areas of different electrical types in a semiconductor. However, such thermal treatment is particularly challenging in the case of gallium nitride since it decomposes at relatively low temperature (~800 °C) at atmospheric pressure. In order to remove the implantation damage in a GaN crystal structure, as well as activate the implanted dopants at ultra-high pressure, annealing process is proposed. It will be described in detail in this paper. P-type GaN implanted with magnesium will be briefly discussed. A possibility to analyze diffusion of any dopant in GaN will be proposed and demonstrated on the example of beryllium.
GaN crystals were grown by hydride vapor phase epitaxy (HVPE) and doped with C. The seeds were high-structural-quality ammonothermally crystallized GaN. The grown crystals were highly resistive at 296 K and of high structural quality. High-temperature Hall effect measurements revealed p-type conductivity and a deep acceptor level in the material with an activation energy of 1 eV. This is in good agreement with density functional theory calculations based on hybrid functionals as presented by the Van de Walle group. They obtained an ionization energy of 0.9 eV when C was substituted for N in GaN and acted as a deep acceptor.
Recent results of GaN bulk growth performed in Poland are presented. Two technologies are described in detail: halide vapor phase epitaxy and basic ammonothermal. The processes and their results (crystals and substrates) are demonstrated. Some information about wafering procedures, thus, the way from as-grown crystal to an epi-ready wafer, are shown. Results of other groups in the world are briefly presented as the background for our work.