Lightweight structures in the automotive and transportation industry are increasingly researched. Multiple materials with tailored properties are integrated into structures via a large spectrum of joining techniques. Welding is a viable solution in mass scale production in an automotive sector still dominated by steels, although hybrid structures involving other materials like aluminum are becoming increasingly important. The welding of dissimilar metals is difficult if not impossible, due to their differential thermo mechanical properties along with the formation of intermetallic compounds, particularly when fusion welding is envisioned. Solid-state welding, as with magnetic pulse welding, is of particular interest due to its short processing cycles. However, electromagnetic pulse welding is constrained by the selection of processing parameters, particularly the coil design and its life cycle. This paper investigates two inductor designs, a linear (I) and O shape, for the joining of sheet metals involving aluminum and steels. The O shape inductor is found to be more efficient both with magnetic pulse (MPW) and magnetic pulse spot welding (MPSW) and offers a better life cycle. Both simulation and experimental mechanical tests are presented to support the effect of inductor design on the process performance.
Laser-roll bonding and magnetic pulse welding are two relatively new processes that greatly minimize problems of metallurgical incompatibilities between dissimilar metals and alloys. These two processes, though technologically apart and invented for components with distinct geometries, utilize to various extents high pressures to facilitate rapid and localized interfacial heating and create reliable joints. In this paper, relations between process parameters, microstructures, and properties are discussed for aluminum-to-steel joints made by laser-roll bonding and magnetic pulse welding.
A metal which rejects energy or diffuses it too easily results in an energy surplus, modifying the balance of the usual mechanisms of laser welding. The solution is to stabilise the molten pool in order to avoid such losses.
To lighten their vehicles, car manufacturers are inclined to substitute steel structures with aluminum alloys or composites parts. They are then faced with the constraints inherent to dissimilar (galvanized steel/aluminum) or hybrid (metal/composite) assemblies. Recent developments in magnetic pulse welding seems to offer a viable route. Very fast, this process can be robotized and generates a very localized heating system which limits the formation of intermetallic and damage the composite. Low energy consumption, without filler metal or smoke it is recognized as an environmentally friendly process. In this paper, electromagnetic pulse welding is exploited to assemble polymer composite to metals. Two techniques, a metallic insert in polymer composite or an external patch, have been tested with possible design considerations.