Lightweight structures in the automotive and transportation industry are increasingly researched. Multiple materials with tailored properties are integrated into structures via a large spectrum of joining techniques. Welding is a viable solution in mass scale production in an automotive sector still dominated by steels, although hybrid structures involving other materials like aluminum are becoming increasingly important. The welding of dissimilar metals is difficult if not impossible, due to their differential thermo mechanical properties along with the formation of intermetallic compounds, particularly when fusion welding is envisioned. Solid-state welding, as with magnetic pulse welding, is of particular interest due to its short processing cycles. However, electromagnetic pulse welding is constrained by the selection of processing parameters, particularly the coil design and its life cycle. This paper investigates two inductor designs, a linear (I) and O shape, for the joining of sheet metals involving aluminum and steels. The O shape inductor is found to be more efficient both with magnetic pulse (MPW) and magnetic pulse spot welding (MPSW) and offers a better life cycle. Both simulation and experimental mechanical tests are presented to support the effect of inductor design on the process performance.
To lighten their vehicles, car manufacturers are inclined to substitute steel structures with aluminum alloys or composites parts. They are then faced with the constraints inherent to dissimilar (galvanized steel/aluminum) or hybrid (metal/composite) assemblies. Recent developments in magnetic pulse welding seems to offer a viable route. Very fast, this process can be robotized and generates a very localized heating system which limits the formation of intermetallic and damage the composite. Low energy consumption, without filler metal or smoke it is recognized as an environmentally friendly process. In this paper, electromagnetic pulse welding is exploited to assemble polymer composite to metals. Two techniques, a metallic insert in polymer composite or an external patch, have been tested with possible design considerations.
Développement du procédé de soudage par impulsion magnétique pour soudage hétérogène bimétallique et pour assemblage hybride métal / composite: La réduction des émissions CO2 et l'amélioration de la performance restent toujours les grands objectifs de l'industrie automobile. Pour atteindre ces objectif, les équipementiers automobiles cherchent toujours à alléger les structures à travers l'emploie des matériaux hétérogènes qui a évolué au cours des dernières décennies où nous trouvons aujourd'hui à la fois des aciers doux, des aciers à très hautes résistances, des alliages légers tels que les alliages d'aluminium et de magnésium ainsi que des composites à fibre de verre ou de carbone. Cette tendance pose aujourd'hui plusieurs défis concernant à la fois l'assemblage bimétallique et l'assemblage hybride métal/composite. Les difficultés de réaliser ce type d’assemblage est lié surtout à la différence des propriétés mécaniques, thermiques et chimiques des divers matéiaux. Ces différences limitent l’utilisation des techniques d’assemblage traditionnelles, c’est-à-dire l’assemblage mécanique, le soudage par fusion et le collage, et nécessitent ainsi le développement de nouvelles solutions d’assemblage. Dans ce contexte, cette étude vise à répondre aux défis des soudages hétérogènes ainsi qu' à développer deux nouvelles solutions originales d'assemblage hybride métal/composite en utilisant le procédé de soudage par impulsion magnétique.