For the first time, to our knowledge, we demonstrate the experimental confirmation of a new vectorially based expression of the effective nonlinear coefficient γ in bismuth suspended core fibers with core diameters of around 500 nm. The new expression predicts a significantly higher value of γ than what is expected based on the standard expression. We confirm that there is a distinguishable difference between the standard and our new vectorially based γ’s, owing to the high index glass and subwavelength dimension of this fiber, and we show that the experimental result of γ matches the new expression within the experimental error.
We present a new approach to the design of optical microstructured fibers that have group velocity dispersion (GVD) and effective nonlinear coefficient (y) tailored for supercontinuum (SC) generation. This hybrid approach combines a genetic algorithm (GA) with pulse propagation modeling, but without include it into the GA loop, to allow the efficient design of fibers that are capable of generating highly coherent and large bandwidth SC in the mid-infrared (Mid-IR) spectrum. To the best of our knowledge, this is the first use of a GA to design fiber for SC generation. We investigate the robustness of these fiber designs to variation in the fiber’s structural parameters. The optimized fiber structure based on a type of tellurite glass (70TeO2-10Na2O-20ZnF2) is predicted to have near-zero group velocity dispersion (<±2ps/nm/km) from 2 to 3 µm, and a effective nonlinear coefficient of y≈174W-1km-1 at 2 µm. The SC output of this fiber shows a significant bandwidth and coherence increase compare to a fiber with a single zero group velocity dispersion wavelength at 2 µm.
We demonstrate the first fluorozirconate microstructured fiber for use in the mid-infrared. The fiber preform was manufactured via extrusion of a billet through a complex graphite die. The fiber exhibits large mode area of , loss of at and only marginal excess loss relative to a corresponding unstructured fiber.
There is a deficiency of low-loss microstructured waveguides that can be fabricated with a single laser-pass to minimize stress build-up, which can enable enhanced functionality and higher compactness for integrated optical devices. We demonstrate, for the first time, a series of multi-ring claddings each with a pair of cores in BK7 glass. Each waveguide was fabricated using only a single laser-pass at 1 MHz pulse repetition rate, 5 mm/s translation speed, 250 fs pulse width, over a set of pulse energies. We obtained the lowest-reported propagation loss of 0.062 dB/cm, measured at 1155 nm wavelength from the waveguide written with 340 nJ pulse energy. The maximum observed numerical aperture is 0.020, measured at 1155 nm wavelength from the waveguide written with 620 nJ pulse energy. Such waveguides could be incorporated in integrated Raman laser platforms for biomedical applications.
We fabricated a microstructured optical fiber with a dispersion profile that, according to calculations, is near-zero and flat, with 3 zero dispersion wavelengths in the mid-IR. To the best of our knowledge this is the first report of the fabrication of such a fiber. Simulations of multimode supercontinuum generation were performed using a simplified approach. Strong agreement between experiments and simulations were observed using this approach.
We report mode-locked ~1550 nm output of transform-limited ~180 fs pulses from a large mode-area (diameter ~50 μm) guided-wave erbium fluorozirconate glass laser. The passively mode-locked oscillator generates pulses with 25 nm bandwidth at 156 MHz repetition rate and peak-power of 260 W. Scalability to higher repetition rate is demonstrated by transform-limited 410 fs pulse output at 1.3 GHz. To understand the origins of the broad spectral output, the laser cavity is simulated by using a numerical solution to the Ginzburg-Landau equation. This paper reports the widest bandwidth and shortest pulses achieved from an ultra-fast laser inscribed waveguide laser.