With the increasing interest in the potential benefits of nanotechnologies, concern is still growing that they may present emerging risks for workers. Various strategies have been developed to assess the exposure to nano-objects and their agglomerates and aggregates (NOAA) in the workplace, integrating different aerosol measurement instruments and taking into account multiple parameters that may influence NOAA toxicity. The present study proposes a multi-metric approach for measuring and sampling NOAA in the workplace, applied to three case studies in laboratories each dedicated to materials with different shapes and dimensionalities: graphene, nanowires, and nanoparticles. The study is part of a larger project with the aim of improving risk management tools in nanomaterials research laboratories. The harmonized methodology proposed by the Organization for Economic Cooperation and Development (OECD) has been applied, including information gathering about materials and processes, measurements with easy-to-use and hand-held real-time devices, air sampling with personal samplers, and off-line analysis using scanning electron microscopy. Significant values beyond which an emission can be attributed to the NOAA production process were identified by comparison of the particle number concentration (PNC) time series and the corresponding background levels in the three laboratories. We explored the relations between background PNC and microclimatic parameters. Morphological and elemental analysis of sampled filters was done to identify possible emission sources of NOAA during the production processes: rare particles, spherical, with average diameter similar to the produced NOAA were identified in the nanoparticles laboratory, so further investigation is recommended to confirm the potential for worker exposure. In conclusion, the information obtained should provide a valuable basis for improving risk management strategies in the laboratory at work.

Despite the progress made in recent years, reliable modeling of indoor air quality is still far from being obtained. This requires better chemical characterization of the pollutants and airflow physics included in forecasting tools, for which field observations conducted simultaneously indoors and outdoors are essential. The project “Integrated Evaluation of Indoor Particulate Exposure” (VIEPI) aimed at evaluating indoor air quality and exposure to particulate matter (PM) of humans in workplaces. VIEPI ran from February 2016 to December 2019 and included both numerical simulations and field campaigns carried out in universities and research environments located in urban and non-urban sites in the metropolitan area of Rome (Italy). VIEPI focused on the role played by micrometeorology and indoor airflow characteristics in determining indoor PM concentration. Short- and long-term study periods captured diurnal, weekly, and seasonal variability of airflow and PM concentration. Chemical characterization of PM₁₀, including the determination of elements, ions, elemental carbon, organic carbon, and bioaerosol, was also carried out. Large differences in the composition of PM₁₀ were detected between inside and outside as well as between different periods of the day and year. Indoor PM composition was related to the presence of people, to the season, and to the ventilation regime.

Widespread production and use of engineered nanomaterials in industrial and research settings raise concerns about their health impact in the workplace. In the last years, graphene-based nanomaterials have gained particular interest in many application fields. Among them, graphene nanoplatelets (GNPs) showed superior electrical, optical and thermal properties, low-cost and availability. Few and conflicting results have been reported about toxicity and potential effects on workers’ health, during the production and handling of these nanostructures. Due to this lack of knowledge, systematic approaches are needed to assess risks and quantify workers’ exposure to GNPs. This work applies a multi-metric approach to assess workers’ exposure during the production of GNPs, based on the Organization for Economic Cooperation and Development (OECD) methodology by integrating real-time measurements and personal sampling. In particular, we analyzed the particle number concentration, the average diameter and the lung deposited surface area of airborne nanoparticles during the production process conducted by thermal exfoliation in two different ways, compared to the background. These results have been integrated by electron microscopic and spectroscopic analysis on the filters sampled by personal impactors. The study identifies the process phases potentially at risk for workers and reports quantitative information about the parameters that may influence the exposure in order to propose recommendations for a safer design of GNPs production process.

Exposure to ultrafine particles (UFPs size < 100 nm) in life and work environments can contribute to adverse health effects also in terms of health burden of related diseases over time. The choice of parameters which better characterize UFPs is challenging, due to their physical-chemical properties and their variable size. It is also strictly related to the availability of different instrumental techniques. In the present study we focus on real time high frequency (1 Hz) UFPs particle size distribution (PSD) and their relationship with total particle number concentration (TPNC) and mean particle diameter (D_avg) as a contribution characterizing by size the human exposure to UFPs in an indoor site of the University of Rome “Sapienza” (Italy). Further considerations about UFPs contribution to nucleation mode (NM) and accumulation mode (AM) have been highlighted, also in order to investigate the contribution of polycyclic aromatic hydrocarbons (PAHs) surface-adsorbed on indoor air particles (pPAHs). High indoor TPNC values were registered during the rush hours (early morning and mid/late afternoon) according to the outdoor influences originated from anthropogenic activities. AM mainly contribute to the indoor TPNC during working days showing high correlation with pPAHs. These findings may provide useful indications in terms of occupational exposure to UFPs since there are many evidences that indoor exposures to such pollutants may be associated with adverse health effects also in working environments.

Graphene-based polymer composites are innovative materials which have recently found wide application in many industrial sectors thanks to the combination of their enhanced properties. The production of such materials at the nanoscale and their handling in combination with other materials introduce growing concerns regarding workers’ exposure to nano-sized materials. The present study aims to evaluate the nanomaterials emissions during the work phases required to produce an innovative graphene-based polymer coating made of a water-based polyurethane paint filled with graphene nanoplatelets (GNPs) and deposited via the spray casting technique. For this purpose, a multi-metric exposure measurement strategy was adopted in accordance with the harmonized tiered approach published by the Organization for Economic Co-operation and Development (OECD). As a result, potential GNPs release has been indicated near the operator in a restricted area not involving other workers. The ventilated hood inside the production laboratory guarantees a rapid reduction of particle number concentration levels, limiting the exposure time. Such findings allowed us to identify the work phases of the production process with a high risk of exposure by inhalation to GNPs and to define proper risk mitigation strategies.

Silica nanoparticles (SiO₂ NPs), due to their chemical-physical properties, are among the most widely produced nanomaterials (NMs) in the world, and therefore used in a wide range of industries. Such widespread use, however, draws attention to the health of workers during the production of such NMs and the need for techniques to assess occupational exposure. In the present study, laboratory simulation techniques were used to reproduce a critical work activity in a controlled environment in order to identify emission profiles useful for studying exposure during NM handling in the workplace. Weighing activity inside a glove box isolated from the external environment background and any pollutants was simulated. Real-time instrumentation was used to calculate the concentration, size distribution and surface area of the particles generated during the simulation, and time-integrated instrumentation was used to collect dust for off-line analysis.