With the increasing interest in the potential benefits of nanotechnologies, concern is still growing that they may present emerging risks for workers. Various strategies have been developed to assess the exposure to nano-objects and their agglomerates and aggregates (NOAA) in the workplace, integrating different aerosol measurement instruments and taking into account multiple parameters that may influence NOAA toxicity. The present study proposes a multi-metric approach for measuring and sampling NOAA in the workplace, applied to three case studies in laboratories each dedicated to materials with different shapes and dimensionalities: graphene, nanowires, and nanoparticles. The study is part of a larger project with the aim of improving risk management tools in nanomaterials research laboratories. The harmonized methodology proposed by the Organization for Economic Cooperation and Development (OECD) has been applied, including information gathering about materials and processes, measurements with easy-to-use and hand-held real-time devices, air sampling with personal samplers, and off-line analysis using scanning electron microscopy. Significant values beyond which an emission can be attributed to the NOAA production process were identified by comparison of the particle number concentration (PNC) time series and the corresponding background levels in the three laboratories. We explored the relations between background PNC and microclimatic parameters. Morphological and elemental analysis of sampled filters was done to identify possible emission sources of NOAA during the production processes: rare particles, spherical, with average diameter similar to the produced NOAA were identified in the nanoparticles laboratory, so further investigation is recommended to confirm the potential for worker exposure. In conclusion, the information obtained should provide a valuable basis for improving risk management strategies in the laboratory at work.

Widespread production and use of engineered nanomaterials in industrial and research settings raise concerns about their health impact in the workplace. In the last years, graphene-based nanomaterials have gained particular interest in many application fields. Among them, graphene nanoplatelets (GNPs) showed superior electrical, optical and thermal properties, low-cost and availability. Few and conflicting results have been reported about toxicity and potential effects on workers’ health, during the production and handling of these nanostructures. Due to this lack of knowledge, systematic approaches are needed to assess risks and quantify workers’ exposure to GNPs. This work applies a multi-metric approach to assess workers’ exposure during the production of GNPs, based on the Organization for Economic Cooperation and Development (OECD) methodology by integrating real-time measurements and personal sampling. In particular, we analyzed the particle number concentration, the average diameter and the lung deposited surface area of airborne nanoparticles during the production process conducted by thermal exfoliation in two different ways, compared to the background. These results have been integrated by electron microscopic and spectroscopic analysis on the filters sampled by personal impactors. The study identifies the process phases potentially at risk for workers and reports quantitative information about the parameters that may influence the exposure in order to propose recommendations for a safer design of GNPs production process.

Exposure to ultrafine particles (UFPs size < 100 nm) in life and work environments can contribute to adverse health effects also in terms of health burden of related diseases over time. The choice of parameters which better characterize UFPs is challenging, due to their physical-chemical properties and their variable size. It is also strictly related to the availability of different instrumental techniques. In the present study we focus on real time high frequency (1 Hz) UFPs particle size distribution (PSD) and their relationship with total particle number concentration (TPNC) and mean particle diameter (D_avg) as a contribution characterizing by size the human exposure to UFPs in an indoor site of the University of Rome “Sapienza” (Italy). Further considerations about UFPs contribution to nucleation mode (NM) and accumulation mode (AM) have been highlighted, also in order to investigate the contribution of polycyclic aromatic hydrocarbons (PAHs) surface-adsorbed on indoor air particles (pPAHs). High indoor TPNC values were registered during the rush hours (early morning and mid/late afternoon) according to the outdoor influences originated from anthropogenic activities. AM mainly contribute to the indoor TPNC during working days showing high correlation with pPAHs. These findings may provide useful indications in terms of occupational exposure to UFPs since there are many evidences that indoor exposures to such pollutants may be associated with adverse health effects also in working environments.

We describe a new on-line sensitive and selective procedure for the determination of trivalent and hexavalent chromium in liquid samples by a tailor-made contactor (TMC), specifically a liquid membrane annular TMC, coupled with inductively coupled plasma with optical detection. The TMC was designed and developed to integrate the extraction and stripping phases of the analyte in one module to minimize the membrane solvent’s consumption and maximize the speed of transport through the liquid membrane. Moreover, the particular geometry studied, which consists of two coaxial hollow fibers, allows the TMC to be used for both separating and preconcentrating purposes. Both (−)-N-dodecyl-N-methylephedrinium bromide (30 mM) in dichloroethane and HNO₃ (0.75 M) were used as the liquid membrane and receiving solution, respectively. The proposed method’s performance was evaluated in terms of the hexavalent chromium extraction efficiency and the coefficient of variation percentages; these were higher than 85% and less than 5%, respectively. In addition, the proposed procedure was applied to two real samples: a tap water sample and an eluate from solid urban waste. In both cases, the analytical performances were good and comparable to those obtained using synthetic standard solutions.

Graphene-based polymer composites are innovative materials which have recently found wide application in many industrial sectors thanks to the combination of their enhanced properties. The production of such materials at the nanoscale and their handling in combination with other materials introduce growing concerns regarding workers’ exposure to nano-sized materials. The present study aims to evaluate the nanomaterials emissions during the work phases required to produce an innovative graphene-based polymer coating made of a water-based polyurethane paint filled with graphene nanoplatelets (GNPs) and deposited via the spray casting technique. For this purpose, a multi-metric exposure measurement strategy was adopted in accordance with the harmonized tiered approach published by the Organization for Economic Co-operation and Development (OECD). As a result, potential GNPs release has been indicated near the operator in a restricted area not involving other workers. The ventilated hood inside the production laboratory guarantees a rapid reduction of particle number concentration levels, limiting the exposure time. Such findings allowed us to identify the work phases of the production process with a high risk of exposure by inhalation to GNPs and to define proper risk mitigation strategies.

Exposure to ultrafine particles has been associated with short- and long-term effects on human health. The object of this paper was to assess Particle Number Concentration (PNC) and size distribution in a university environment and study the indoor/outdoor relationships. Measurements were carried out using co-located (indoor/outdoor) condensation particle counters and size spectrometers during two seasonal periods characterized by different meteorological conditions at five selected classrooms different for size, capacity, floor and use destination. PNC was dominated by particles in the ultrafine mode both indoor and outdoor. The indoor/outdoor ratios were on average between 1 and 1.2 in the summer and between 0.6 and 0.9 in the winter. Mostly the differences found among classrooms could be related to the condition of use (i.e., crowding, natural air exchange, air conditioning, seasonality). Only little differences were found among PNC measured immediately outside the classrooms. Based on information taken during the measurement campaigns, on the classrooms condition of use, it was possible to assess as a source of indoor particles in the coarse mode, the presence of students and teachers.