Shaochun Ma

Dr. Shaochun Ma

Henan University
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2023 in Frontiers in Materials
Verified
Journal Article
Open access
SMShaochun Ma
Shaochun Ma
YYYudi Yao
Yudi Yao
PBPeng Bao
Peng Bao
CGChengchao Guo
Chengchao Guo
This study investigated the effects of soil moisture content on the strength and deformation properties of the foundation soils of cultural relics. Our goal is to inform the formulation and implementation of the repair scheme for cultural relics above the foundation soils and help protect cultural relics. Soil samples with five different moisture contents were prepared and used in unconfined compression, triaxial, and consolidation tests. Several mechanical parameters were determined under different soil moisture contents: failure morphology, compressive strength, compressive modulus, and compressibility coefficient. Based on the test results, the soil cohesion and angle of internal friction were obtained using Mohr’s circle. Regions where the mechanical parameters were particularly sensitive to moisture content were located during the consolidation test. These were also the regions where the soil’s compressive modulus declined rapidly, which was detrimental to the overall stability and safety of overlying structures. The internal structure and particle size distribution of the foundation soils supporting cultural relics were determined by scanning electron microscopy. Constitutive parameters of soils were determined by the triaxial test and consolidation test. It was also found that when the soil moisture content exceeded the optimal level, the foundation soils were very likely to pose a risk to the safety of the overlying cultural relics. The moisture content of foundation soils supporting cultural relics deserves special attention in engineering practice.

19 June 2015 in Materials
Verified
Journal Article
Open access
PDF file
SMShaochun Ma
Shaochun Ma
NJNan Jiang
Nan Jiang
In order to evaluate the seismic performance of new-type composite exterior wallboard, a total of six exterior and interior wallboards were incorporated in the experiment of seismic performance. Seismic performance such as the stress process, damage mode, hysteresis and skeleton curve, load-carrying and ductility coefficient, damping and energy dissipation, stiffness degradation as well as material strain of the exterior wallboards were analyzed with emphasis and compared with interior wallboards. Results of the experiment and analysis showed that both interior and exterior wallboards exhibited outstanding seismic performance. Due to the existence of insulation layer and externally bonded single gypsum board, the capacity of elastoplastic deformation and seismic energy dissipation of the exterior wallboards was improved and each seismic performance indicator of the exterior wallboards outperformed the interior wallboards.

1 January 2022 in Journal of Renewable Materials
Verified
Journal Article
Open access
PDF file
SMShaochun Ma
Shaochun Ma
LWLin Wang
Lin Wang
PBPeng Bao
Peng Bao
There are a large number of historic buildings which were mainly made of blue-brick masonry in today’s world. However, for the natural and man-made reasons, these historic buildings have been damaged in different degrees. In order to protect historic buildings more scientifically and learn about the preservation state of existing historic buildings, it is necessary to ascertain the material properties of blue brick in historic buildings. The article takes the blue bricks of historical buildings in Kaifeng area of the Central Plains as an example to study. Through the analysis of physical properties, X-ray fluorescence spectroscopy, X-ray diffraction and scanning electron microscopy of blue brick specimens, the physical properties such as the apparent density, moisture content, porosity, and material structure composition are understood. The results show that the apparent density of blue brick is 1.64 g/cm3 , the moisture content is 10.23%, the 24 h atmospheric water absorption is 17.86%, and the porosity is 20.99%. The smaller the apparent density is, the larger the porosity is, and the water absorption performance is better. From the microscopic point of view, bonding ability between blue brick mineral particles is relatively weak. The pores between skeletons are large and the pore structure is obvious. From the perspective of material phase, the elements of blue brick are mainly O, Si, Al, Fe, and the composition of blue brick is mainly composed of quartz and feldspar. The softening coefficient of blue brick is 0.80, and the deformation and stability of the structure should be paid special attention in the rainy season or wet environment. Through the frost test, there are salt substances in the internal pores of the brick, and the surface of the blue brick is eroded and pulverized. In this paper, the experimental process and analysis methods for testing the material properties of blue brick can provide reference for the research on the material properties of the same kind of blue-brick masonry in historic buildings and masonry relics. The relevant material property parameters obtained in this paper can provide guidance for making protection schemes and scientific repairs for historic buildings in Central China, enrich the evaluation criteria for maintaining and reinforcing historic buildings, and provide theoretical support for studying the damage and health detection technology related to historic buildings.

28 December 2023 in Structures
Verified
Journal Article
Closed access
SMShaochun Ma
Shaochun Ma
STShilong Tan
Shilong Tan
YPYanhui Pan
Yanhui Pan
YGYu Gu
Yu Gu

13 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SMShaochun Ma
Shaochun Ma
PBPeng Bao
Peng Bao
NJNan Jiang
Nan Jiang
In this paper, a new kind of gypsum-concrete dense-column thermal insulation composite board was developed, with seismic tests conducted on three specimens under quasi-static loading conditions. The fracture feature, hysteresis behavior, material strain, load-bearing and deforming capacity, and energy-dissipating capacity of the composite board were analyzed. The results indicated that this composite board has a favorable energy-dissipating capacity, i.e., relatively high seismic performance. By comparing with the experimental results of composite boards without thermal insulation systems, the influence regularity of thermal insulation system on the deformation behavior of composite board was investigated. The comparison result indicated that with a thermal insulation system, the bearing capacity and ductility of composite board are obviously increased, implying that the thermal insulation system is beneficial for the seismic performance of composite boards.

19 October 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SMShaochun Ma
Shaochun Ma
YWYouwen Wu
Youwen Wu
PBPeng Bao
Peng Bao
This article presents building assessment research comprising on-site inspections, indoor scientific tests, and material performance studies on the wall blue clay bricks in the Kaifeng People’s Conference Hall, objectively developing an enhanced scientific understanding to renovate modern buildings. Using X-ray diffraction (XRD), scanning electron microscopy (SEM), alongside a parametric study of density, moisture content, water absorption, void ratio, frosting, compressive strength, and softening coefficient in assessing the material health of the blue clay bricks and it’s non-key parts, in developing “appropriate and compatible renovation” to repair contemporaneous buildings. The composition, pore characteristics, weathering degree, and mechanical properties of the blue clay brick samples were analyzed. These parameters showed that blue clay brick fired at less than 1000 °C; the main mineral composition as quartz, followed by albite, mica, and anorthite. Its density was 1.573 g/cm3, less than the 1.70 g/cm3of ordinary clay brick. According to the standards, the water absorption was greater than that of regular sintered bricks by more than 18% and was slightly frosted. Compressive strength being less than MU10 did not meet the current design specifications for masonry. Its softening coefficient was between 0.70 and 0.85, but its water resistance was relatively good. The research results provide an essential reference for judging the health and longevity of modern buildings to achieve scientific guidelines for practical protection.