This paper reports an energy-efficient permanent magnet (PM) zero-holding-energy magnetic contactor (ZMC) that consumes no energy while maintaining an open or closed state. Conventional solenoid magnetic contactor (MC) technology has several critical drawbacks, including high continuous energy consumption, continuous vibration, and low reliability. The proposed ZMC substantially reduces energy consumption and heat generation, produces no vibration, and provides increased reliability. Traditional MC analysis typically requires computationally expensive finite element analysis (FEA). To reduce the analysis costs, a recently proposed fast and accurate nonlinear transient path energy method (NT-PEM) is utilized to significantly reduce analysis time and costs. Analysis accuracy was verified experimentally using a fabricated ZMC prototype. The economic and environmental benefits of the proposed ZMC confirm its significant potential as an energy-efficient eco-friendly alternative to traditional MC technology. ZMC is particularly promising for vehicular micro-grids due to the prolongation of the lifetime of batteries owing to reduced energy consumption.
17 February 2015 in Journal of Physics: Conference Series
Convolutional Neural Networks (CNNs) and Deep Learning (DL) revolutionized numerous research fields including robotics, natural language processing, self-driving cars, healthcare, and others. However, DL is still relatively under-researched in physics and engineering. Recent works on DL-assisted analysis showed enormous potential of CNN applications in electrical engineering. This paper explores the possibility of developing an end-to-end DL analysis method to match or even surpass conventional analysis techniques such as finite element analysis (FEA) based on the ability of CNNs to predict the performance characteristics of electric machines. The required depth in CNN architecture is studied by comparing a simplistic CNN with three ResNet architectures. Studied CNNs show over 90% accuracy for an analysis conducted under a minute, whereas a FEA of comparable accuracy required 200 h. It is also shown that training CNNs to predict multidimensional outputs can improve CNN performance. Multidimensional output prediction with data-driven methods is further discussed in context of multiphysics analysis showing potential for developing analysis methods that might surpass FEA capabilities.
Currently, camera modules are used in a wide range of applications ranging from micropositioning actuator systems used in smartphones to larger modules used in stationary cameras, CCTV, and others. Modern camera modules are required to perform positioning functions to improve the stability and quality of captured images. These functions mainly include the autofocus (AF) and optical image stabilization (OIS) functions. Traditionally, separate actuators and sensors are used for AF and OIS, each contributing towards energy consumption, module size, and manufacturing costs. This is particularly disadvantageous in the case of smartphones owing to their inherent space and battery charge limitations. This paper presents a novel Magnetic Shape Memory (MSM) actuator system that combines the AF and OIS functions, which are performed using two actuators; thus, this system is a simple, compact, and cost-effective solution to the drawbacks of conventional technology. Furthermore, the smart properties of MSM alloys reduce the energy consumption of these systems through the utilization of their inherent holding forces and the associated shape memory effect. The realization of AF and OIS functions is discussed and verified experimentally for the proposed actuator system using data obtained from a fabricated prototype.
This paper proposes a novel analytical method for the analysis of the dynamics of electrical machines. The method is applied to the analysis of complex permanent magnet (PM)-type magnetic contactors (MCs), which exhibit strong magnetic non-linearities and a high portion of stray and leakage magnetic fluxes. The latter means that the analysis of PM-type MCs using traditional magnetic equivalent circuit (MEC) methods is impossible, thus requiring computationally expensive and time-consuming finite element analysis (FEA). To overcome limitations of traditional MECs, the magnetic field distribution in PMtype MC is studied in great detail, and a novel non-linear dynamic MEC (ND-MEC) method is proposed. The accuracy of the ND-MEC method is comparable to that of FEA which is achieved by accounting for nonlinear effects and dynamic changes in the magnetic flux distribution using a novel stray path elliptical function. Furthermore, the applicability of the ND-MEC is extended to the time domain by combining it with the time difference method (TDM). The complete method, referred to as the non-linear transient path energy method (NT-PEM), combines the ND-MEC, TDM, and a path energy method for the calculation of electromagnetic forces. The validity of the NT-PEM is verified by comparing it with 3D FEA and experimental results obtained from a PM-type MC prototype. The NT-PEM is a fast and inexpensive alternative to FEA, which is particularly advantageous when many designs must be analyzed and optimized while reducing analysis costs. The proposed method can also be applied to the analysis of emerging technologies dealing with multiphysics coupled problems, as in the case of smart materials.