Total harmonic distortion (THD) and voltage stress across the switches are critical issues in power electronic systems. Although multilevel inverters (MLIs) were initially used to minimize these issues, doing so is challenging when simultaneously attempting to minimize the number of components such as switches, DC sources, and gate drivers. To address this problem, a new pd-type MLI is presented with two back-to-back connected d-type modules with an H-bridge, that generates the negative voltage levels. The proposed topology with 10-unidirectional switches, and 4 DC sources operates in symmetric and asymmetric configuration to generate 9, 13 and 17-voltage levels. The presented inverter is extended using cascaded connections to attain more output voltage levels, making it usable for the applications with diverse number of DC links for medium and high voltage applications. The proposed topology also exhibits small THD, low number of power electronic components, and low total voltage stress across the switches in each cycle. Furthermore, a widely used nearest level control modulation technique is used to generate output voltage levels with minimum amount of THD at the output. Finally, simulations were performed using MATLAB/Simulink and experiments were conducted to validate the performance of the proposed topology.
Convolutional Neural Networks (CNNs) and Deep Learning (DL) revolutionized numerous research fields including robotics, natural language processing, self-driving cars, healthcare, and others. However, DL is still relatively under-researched in physics and engineering. Recent works on DL-assisted analysis showed enormous potential of CNN applications in electrical engineering. This paper explores the possibility of developing an end-to-end DL analysis method to match or even surpass conventional analysis techniques such as finite element analysis (FEA) based on the ability of CNNs to predict the performance characteristics of electric machines. The required depth in CNN architecture is studied by comparing a simplistic CNN with three ResNet architectures. Studied CNNs show over 90% accuracy for an analysis conducted under a minute, whereas a FEA of comparable accuracy required 200 h. It is also shown that training CNNs to predict multidimensional outputs can improve CNN performance. Multidimensional output prediction with data-driven methods is further discussed in context of multiphysics analysis showing potential for developing analysis methods that might surpass FEA capabilities.
This paper proposes a novel brushless excitation topology for a three-phase synchronous machine based on a customary current-controlled voltage source inverter (VSI). The inverter employs a simple hysteresis-controller-based current control scheme that enables it to inject a three-phase armature current to the stator winding which contains a dc offset. This dc offset generates an additional air gap magneto-motive force (MMF). On the rotor side, an additional harmonic winding is mounted to harness the harmonic power from the air gap flux. Since a third harmonic flux is generated in this type of topology, the machine structure is also modified to accommodate the third harmonic rotor winding to have a voltage induced as the rotor rotates at synchronous speed. Specifically, four-pole armature and field winding patterns are used, whereas the harmonic winding is configured for a twelve-pole pattern. A diode rectifier is also mounted on the rotor between the harmonic and field windings. Therefore, the generated voltage on the harmonic winding feeds the current to the field winding for excitation. A 2D-finite element analysis (FEA) in JMAG-Designer was carried out for performance evaluation and verification of the topology. The simulation results are consistent with the proposed theory. The topology could reduce the cost and stator winding volume compared to a conventional brushless machine, with good potential for various applications.
This paper proposes a cost-effective brushless technique for wound rotor synchronous machines (WRSMs). The proposed technique involves a traditional current-controlled voltage source inverter that utilizes a simple hysteresis-controller-based current control scheme and supplies three-phase currents to the armature winding of the machine. The supplied armature currents inherently contain fundamental-harmonic and third-harmonic current components. These unique armature current waveforms were previously realized by using dual-inverter-controlled schemes achieved with and without thyristor switches to develop brushless WRSM topologies. The fundamental-harmonic current component is applied to develop the main stator field, whereas the third-harmonic component is employed to realize the harmonic magnetomotive force, which induces a back electromotive force (EMF) in the harmonic winding located at the rotor periphery. The induced harmonic EMF is rectified to deliver a DC current to the rotor field winding through a full-bridge diode rectifier to achieve brushless operation. The proposed cost-effective brushless technique for WRSMs is validated using 2-D finite element analysis employing JMAG-Designer 19.1 to investigate the electromagnetic and electromechanical behaviors of the machine. Furthermore, the proposed technique is employed in machine topologies with different pole/slot combinations for the armature winding to achieve better performance.
This paper proposes a novel multifunctional topology for a grid-connected voltage source inverter to control the speed and power flow of a squirrel-cage induction motor. For high-inertia loads during startup, the issues faced include a large transient current and high heat generation. However, the solutions proposed by existing startup methods are inadequate. The topology presented in this study not only addresses the problems related to these methods, i.e., creating a smooth startup, but also presents a flexible alternative for power factor correction using capacitor banks. First, the proposed technique accelerates the motor smoothly to its operating point through the sinusoidal voltage provided by an inverter with an LC filter in its output. In the second step of the control method, after achieving stability in the desired operating point, a converter with an LC filter is assigned the task of power factor correction. Thus, the proposed topology achieves a smooth startup and unity power factor. It includes a new control strategy in which the rotor field-oriented control method is employed for the speed control mode. Finally, the validity of the proposed theory is verified.
Model-based control laws play an important role in stabilizing and guaranteeing high performance of active magnetic bearing (AMB) suspended high-speed machines. In the case of rotating machines with significant gyroscopic effects, the modes are separated into forward and backward whirling modes. This often leads to a situation where a single controller with fixed parameters cannot stabilize the full operational region. Addressing the challenges arising from rotating machines with significant gyroscopic effects, the application of $$H_\infty$$ –based linear parameter varying (LPV) control, scheduled as a function of rotational velocity, is considered in this paper. This approach is combined with an unbalance rejection strategy, where the notch parameter matrix is also updated as a function of velocity. The performance and stability of the MIMO closed-loop control are evaluated using generalized Nyquist diagrams, along with damping ratio and disk margins analysis. Such an analysis will serve as a unified framework to support the analysis as well as design and compare of LPV-based closed loop controllers. Validation of the proposed control approach is verified with experimental electrical machine equipped with AMBs.