Chemical or feedstock recycling of poly(methyl methacrylate) (PMMA) by thermal degradation is an important societal challenge to enable polymer circularity. The annual PMMA world production capacity is over 2.4 × 10⁶ tons, but currently only 3.0 × 10⁴ tons are collected and recycled in Europe each year. Despite the rather simple chemical structure of MMA, a debate still exists on the possible PMMA degradation mechanisms and only basic batch and continuous reactor technologies have been developed, without significant knowledge of the decomposition chemistry or the multiphase nature of the reaction mixture. It is demonstrated in this review that it is essential to link PMMA thermochemical recycling with the PMMA synthesis as certain structural defects from the synthesis step are affecting the nature and relevance of the subsequent degradation reaction mechanisms. Here, random fission plays a key role, specifically for PMMA made by anionic polymerization. It is further highlighted that kinetic modeling tools are useful to further unravel the dominant PMMA degradation mechanisms. A novel distinction is made between global conversion or average chain length models, on the one hand, and elementary reaction step-based models on the other hand. It is put forward that only by the dedicated development of the latter models, the temporal evolution of degradation product spectra under specific chemical recycling conditions will become possible, making reactor design no longer an art but a science.

As societal interest in recycling of plastics increases, modeling thermochemical recycling of vinyl polymers, e.g., via pyrolysis or reactive extrusion, becomes increasingly important. A key aspect remains the reliability of the simulation results with fewer evaluation studies regarding convergence as in the polymerization or polymer reaction engineering field. Using the coupled matrix-based Monte Carlo (CMMC) framework, tracking the unzipping of individual chains according to a general intrinsic reaction scheme consisting of fission, β-scission, and termination, it is however illustrated that similar convergence demands as in polymerization benchmark studies can be employed, i.e., threshold values for the average relative error predictions on conversion and chain length averages can be maintained. For this illustration, three theoretical feedstocks are considered as generated from CMMC polymer synthesis simulations, allowing to study the effect of the initial chain length range and the number of defects on the convergence demands. It is shown that feedstocks with a broader chain length distribution and a long tail require a larger Monte Carlo simulation volume, and that the head–head effects play a key role in the type of degradation mechanism and overall degradation rate. A minimal number of chains around 5 × 10⁵ is needed to properly reflect the degradation kinetics. A certain degree of noise can be allowed at the higher carbon-based conversions due to the inevitable decrease in number of chains.