The assessment of the extent of degradation of polymer molecules during processing via conventional (e.g., extrusion and injection molding) and emerging (e.g., additive manufacturing; AM) techniques is important for both the final polymer material performance with respect to technical specifications and the material circularity. In this contribution, the most relevant (thermal, thermo-mechanical, thermal-oxidative, hydrolysis) degradation mechanisms of polymer materials during processing are discussed, addressing conventional extrusion-based manufacturing, including mechanical recycling, and AM. An overview is given of the most important experimental characterization techniques, and it is explained how these can be connected with modeling tools. Case studies are incorporated, dealing with polyesters, styrene-based materials, and polyolefins, as well as the typical AM polymers. Guidelines are formulated in view of a better molecular scale driven degradation control.
Chemical or feedstock recycling of poly(methyl methacrylate) (PMMA) by thermal degradation is an important societal challenge to enable polymer circularity. The annual PMMA world production capacity is over 2.4 × 106 tons, but currently only 3.0 × 104 tons are collected and recycled in Europe each year. Despite the rather simple chemical structure of MMA, a debate still exists on the possible PMMA degradation mechanisms and only basic batch and continuous reactor technologies have been developed, without significant knowledge of the decomposition chemistry or the multiphase nature of the reaction mixture. It is demonstrated in this review that it is essential to link PMMA thermochemical recycling with the PMMA synthesis as certain structural defects from the synthesis step are affecting the nature and relevance of the subsequent degradation reaction mechanisms. Here, random fission plays a key role, specifically for PMMA made by anionic polymerization. It is further highlighted that kinetic modeling tools are useful to further unravel the dominant PMMA degradation mechanisms. A novel distinction is made between global conversion or average chain length models, on the one hand, and elementary reaction step-based models on the other hand. It is put forward that only by the dedicated development of the latter models, the temporal evolution of degradation product spectra under specific chemical recycling conditions will become possible, making reactor design no longer an art but a science.
A design of PET mechanical recycling at the industrial scale requires the inspection of the relevance of pre-treatment steps, degradation reactions and repair potential, accounting for the impact of contamination ( e.g. NIAS) and regulations.
24 September 2020 in Industrial & Engineering Chemistry Research
The performance of polymeric materials depends strongly on the control over the polymer microstructure during the synthesis step. In this review, attention is paid to the potential of microkinetic modelling to facilitate the identification of optimal reactants and reaction conditions to design the polymer microstructure in bulk and solution (post)polymerisation processes. Focus is on living polymerization, reversible deactivation radical polymerization (RDRP) and “click” chemistry techniques, covering both batch and continuous synthesis approaches. A description according to the increasing level of macromolecular detail and thus modelling complexity is provided, including not only the characterization of the polymer microstructure via a finite number of variates (e.g. chain length, overall composition and branching content) but also its explicit visualisation by the simulation of the architecture and monomer sequences of a representative number of individual polymer chains. Several complementary case studies are included to demonstrate the high relevance of model-based design for the development of improved and novel synthetic protocols for precision control.