Theoretical and experimental studies since the 1980s have pointed to the existence of organic molecules that violate Hund's rule of maximum multiplicity, with the lowest singlet excited state having lower energy than the lowest triplet excited state. With the rising prevalence of organic light-emitting diodes (OLEDs) in display technology, these types of molecules are being investigated as a new class of organic emitters. The singlet–triplet inversion implies that thermal activation is not necessary to achieve fast triplet harvesting, providing potential benefits over conventional thermally activated delayed fluorescence emitters. Here, we overview prominent studies regarding inverted singlet and triplet excited states in the context of OLEDs.
Injection-charge extraction by linearly increasing voltage in metal-insulator-semiconductor structures (MIS-CELIV) is applied for the hole mobility measurement of N,N’-Bis(naphthalen-1-yl)-N,N’-bis(phenyl)-benzidine (NPB), which is a standard hole-transporting material for organic light-emitting diodes. Ideal transient currents in agreement with the theory are observed in the NPB film due to its amorphous and homogenous structure, which is regarded as a continuous dielectric. This ideal response enables us to discuss the validity of the MIS-CELIV mobility by comparing its absolute value with that of the conventional space-charge-limited current method. In addition, to establish an experimental guideline for precise measurements, the effect of the voltage drop on the insulator is investigated.
A promising type of organic transistor based on the charge injection process at an organic/metal interface was proposed and demonstrated. The device was composed of an organic deposited film sandwiched between two metal electrodes, with a third stripe-shaped electrode embedded in the organic film. The output current, corresponding to the collector current, was modulated by an applied voltage on the third electrode, corresponding to the base electrode, and the current amplification factor, exceeded 70. The operation of the device as a transistor was attributed to electron injection from the accumulation of holes supplied by the third electrode.
1 October 2010 in Review of Scientific Instruments
A dispersion interferometer is one of the promising methods of the electron density measurement on large and high density fusion devices. This paper describes development of a laser dispersion interferometer with a photoelastic modulator for phase modulation. In order to make the dispersion interferometer free from variations of the detected intensity, a new phase extraction method is introduced: The phase shift is evaluated from a ratio of amplitudes of the fundamental and the second harmonics of the phase modulation frequency in the detected interference signal. The proof-of-principle experiments demonstrate the feasibility of this method.