The increase in global pollution, industrialization and fast economic progress are considered to inflict serious consequences to the quality and availability of water throughout the world. Wastewater is generated from three major sources, i.e. industrial, agricultural, and municipal which contain pollutants, such as: xenobiotics, microplastics, heavy metals and augmented by high amount of carbon, phosphorus, and nitrogen compounds. Wastewater treatment is one of the most pressing issues since it cannot be achieved by any specific technology because of the varying nature and concentrations of pollutants and efficiency of the treatment technologies. The degradation capacity of these conventional treatment technologies is limited, especially regarding heavy metals, nutrients, and xenobiotics, steering the researchers to bioremediation using microalgae (Phycoremediation). Bioremediation can be defined as use of microalgae for removal or biotransformation of pollutants and CO2 from wastewater with concomitant biomass production. However, the usage of wastewaters for the bulk cultivation of microalgae is advantageous for reducing carbon, nutrients cost, minimizing the consumption of freshwater, nitrogen, phosphorus recovery, and removal of other pollutants from wastewater and producing sufficient biomass for value addition for either biofuels or other value-added compounds. Several types of microalgae like Chlorella and Dunaliella have proved their applicability in the treatment of wastewaters. The bottlenecks concerning the microalgal wastewater bioremediation need to be identified and elucidated to proceed in bioremediation using microalgae. This objective of this paper is to provide an insight about the treatment of different wastewaters using microalgae and microalgal potential in the treatment of wastewaters containing heavy metals and emerging contaminants, with the specialized cultivation systems. This review also summarizes the end use applications of microalgal biomass which makes the bioremediation aspect more environmentally sustainable. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Improper Solid Waste Management leads to the generation of landfill leachate at the landfills. To reduce the negative impacts of highly toxic and recalcitrant leachate on the environment, several techniques have been used. A lot of research is conducted to find suitable methods for the treatment of landfill leachate such as biological processes, chemical oxidation processes, coagulation, flocculation, chemical precipitation, and membrane procedures. The biological process is still being used widely for the treatment of leachate. The current system of leachate treatment consists of various unit processes which require larger area, energy and cost. In addition, the current aerobic treatment is not able to treat entirely the pollutants which require further treatment of the leachate. Anaerobic wastewater treatment has gained considerable attention among researchers and sanitary engineers primarily due to its economic advantages over conventional aerobic methods. The major advantages of anaerobic wastewater treatment in comparison to aerobic methods are: (a) the lack of aeration, which decreases costs and energy requirements; and (b) simple maintenance and control, which eliminates the need for skilled operators and manufacturers. Several anaerobic processes have been used for leachate treatment such as up-flow anaerobic sludge blanket (UASB) reactor, anaerobic filter, hybrid bed reactor, anaerobic sequencing batch reactor and Anaerobic baffled reactor. The following chapter provides an insight to the solid waste management at the landfills, generation of leachate and details of some of the highly efficient anaerobic treatment systems that are used for the overall treatment of landfill leachate.