Multichannel analysis of surface waves (MASW) is a fast, low-cost, and environmentally friendly technique to estimate shear wave velocity profiles of soil sites. This paper introduces a new open-source software, MASWaves, for processing and analysing multichannel surface wave records using the MASW method. The software consists of two main parts: a dispersion analysis tool (MASWaves Dispersion) and an inversion analysis tool (MASWaves Inversion). The performance of the dispersion analysis tool is validated by comparison with results obtained by the Geopsy software package. Verification of the inversion analysis tool is carried out by comparison with results obtained by the software WinSASW and theoretical dispersion curves presented in the literature. Results of MASW field tests conducted at three sites in south Iceland are presented to demonstrate the performance and robustness of the new software. The soils at the three test sites ranged from loose sand to cemented silty sand. In addition, at one site, the results of existing spectral analysis of surface waves (SASW) measurements were compared with the results obtained by MASWaves.
1 June 2010 in Soil Dynamics and Earthquake Engineering
The road along the Óshlíð hillside in the West Fjords region of Iceland is one of the most hazardous roads in Iceland due to avalanches, rockfalls and debris flows. The road has little traffic, but nevertheless traffic accidents caused by the severe conditions at the site are common. A number of avalanche tracks are found on the hillside. In some of these tracks, avalanches occur more frequently than in others. When there is an avalanche threat, avalanches generally flow over many tracks in a short time. Monitoring vibrations in the tracks with the highest avalanche frequency can indicate when avalanches start flowing down the hillside in a snowstorm, and avalanche hazard can then be declared with the specific site indicated. The same methodology can be used for rockfalls and debris flows, which are strongly affected by weather conditions and typically occur in clusters. Based on this knowledge, a research project was initiated in February 1996 with the objective of developing an automatic system based on seismic measurements to detect and analyze avalanches on the Óshlíð hillside and to instantly send a warning to a control station.
8 April 2021 in Bulletin of Earthquake Engineering