In this letter, we present a detailed investigation on how dynamic thermal phenomena take place in state of-the-art SiGe HBTs when excited by sinusoidal power dissipation. To give a better insight into the mechanisms leading to the thermal impedance (Zth) decay, we introduce the concept of thermal penetration depth; then, with the help of 3-D thermal simulations, we illustrate its effect on the spatial distribution of the temperature variations within the transistor structure, according to the frequency of operation. In order to experimentally analyze the impact on a real device, dedicated HBT structures are designed; they consist of multi-finger SiGe HBTs realized in B55 technology from STMicroelectronics,for which modifications are made in the back-end-of-line (BEOL) metallization or in the transistor layout, increasing its deep trench isolation enclosed area. For these transistors, Zth measurements are carried out in the frequency range 10kHz-1GHz; the results show that the metal connections configuration in the BEOL or layout modifications can considerably impact the Zth decay at low frequencies. An identical Zth trend is instead measured above 1-2 MHz, demonstrating that at higher frequencies just the region close to the heat source is concerned by dynamic thermal phenomena.
In this paper we study and analyze the existing techniques in literature to extract the self-heating thermal resistance from the measured DC electrical behaviour of silicon-germanium heterojunction bipolar transistors (SiGe HBTs) focusing their dependence on device junction temperature and propose a simple extraction technique that shows superior accuracy than the existing extraction methodologies. Our approach is scalable and validated with model card simulations across different emitter geometries for a wide temperature range. We also present the applicability of our approach on measured data of a SiGe HBT fabricated in STMicroelectronics B55 process.
7 August 2017 in IEEE Transactions on Electron Devices
An accurate analytic model is proposed for estimating the junction temperature and thermal resistance in silicon-germanium heterojunction bipolar transistors (SiGe HBTs) including the back-end-of-line (BEOL) metal layers. The model uses an average value of thermal conductivity in order to include the temperature dependence of thermal resistance. The parameters corresponding to the thermal conductivity and the BEOL thermal resistance used in the model are extracted following a recently reported methodology. The proposed model is scalable in nature and verification with experimental data shows an excellent accuracy across different emitter geometries of SiGe HBTs fabricated in STMicroelectronics B9MW technology. Compact model simulations show that the proposed model simulates around 23% faster compared with an existing state-of-the-art iterative method.
7 June 2016 in IEEE Transactions on Electron Devices
In this paper, we propose a new method for estimating the peak junction temperature and thermal resistance in modern heterojunction bipolar transistors (HBTs). The proposed method uses the temperature dependence of thermal conductivity of the material. The method is analytic in nature and does not require any iteration as opposed to the existing state-of-the-art model. This analytic method can easily include the available scaling relations relevant to specific technology to estimate the junction temperatures and thermal resistances of the corresponding transistors. The analytic model is tested against iterative self-consistent solutions for simple structures without any trench isolation and for structures corresponding to the ST Microelectronics B9MW technology that includes shallow and deep trench isolations. The model is slightly modified in order to include the effects from the back-end-of-line metal layers. The resulting analytic model is validated against the measured results for silicon germanium HBTs fabricated in ST Microelectronics B9MW technology.
10 January 2017 in IEEE Transactions on Electron Devices
In this brief, we propose a simple approach to extract the contribution of the back-end-of-line (BEOL) layers on the thermal resistance of heterojunction bipolar transistors (HBTs). A finite value of BEOL thermal resistance obtained following our approach confirms a non-negligible heat flow toward BEOL. The proposed extraction technique is validated with iterative solutions and measured data of silicon–germanium HBTs fabricated in the STMicroelectronics B9MW technology.
In this paper we present an improved self-consistent iterative model for thermal resistance in SiGe HBTs. The proposed model evaluates both the upward and downward heat dissipation from the heat source located at the base-collector junction. Along with the temperature dependency, thermal conductivity degradation due to heavy doping and Ge composition in the base region is included in the proposed model. It is observed that the model accuracy is improved once these physical effects are included along with the upward heat diffusion. Scalability of the proposed model is validated with the measured data for different emitter geometries.