In this paper, analytical models of subthreshold current and slope for asymmetric four-terminal double-gate (DG) MOSFETs are presented. The models are used to study the subthreshold characteristics with asymmetry in gate oxide thickness, gate material work function, and gate voltage. A model for the subthreshold behavior of three-terminal DG MOSFETs is also presented. The results of the models show excellent match with simulations using MEDICI. The analytical models provide physical insight which is helpful for device design.
3 February 2022 in IEEE Transactions on Electron Devices
We propose a physics-based analytical model that accurately captures the effects of buffer traps on dc characteristics of gallium nitride (GaN)-based high-electron-mobility transistors (HEMTs). The model is then semi-analytically extended to additionally include the transient behavior. Analytical formulations for the shift in the threshold voltage ${(}{V}_{\text {OFF}}{)}$ and two-dimensional electron gas (2-DEG) density due to the presence of buffer traps in the steady state are presented. In pulsed operation, technology computer-aided design (TCAD) simulations indicate that a time-dependent negative potential (NP) is developed under the gate, resulting in a modified ${V}_{\text {OFF}}$ and current collapse (CC). An expression for the modified ${V}_{\text {off}}$ helps capture the pulsed current–voltage characteristics. The model captures the dependence of bias, time, temperature, trap concentration, capture cross section area, and activation energy of traps on the steady-state and transient characteristics. The model is implemented in Verilog-A in an existing compact model framework using a diode and RC sub-circuit and validated using measured data and TCAD simulations. The modeling results are in excellent agreement with the experimental data and TCAD simulations. Since the model is physics-based, it requires fewer number of parameters compared to that in the existing models.
A scalable, broadband, and physics-based compact model for on-chip spiral inductors with rectangular outline shape is demonstrated for the first time in this paper. A simple dc inductance model is developed based on the current sheet approximation. The reduction in inductance due to the flow of eddy current in a back metal plate is considered using the method of images. A three-ladder network is shown to be sufficient to accurately model skin effect caused due to the magnetic field setup at high frequencies. Geometry-dependent expression suitable for rectangular cross-sectional metal strips is presented to predict the proximity effect. Physics-based expression for the substrate capacitance is derived. The proposed model is also shown to have a good correlation in the presence of a patterned ground shield. The proposed model is verified across CMOS process parameters that affect the inductor performance, such as metal thickness, substrate resistivity, and substrate thickness. Furthermore, model accuracy is also validated across design parameters such as spiral width, spacing between turns, number of turns, and diameter. The model is shown to have a good agreement with both EM simulations and measurements.
7 June 2016 in IEEE Transactions on Electron Devices
In this paper, we propose a new method for estimating the peak junction temperature and thermal resistance in modern heterojunction bipolar transistors (HBTs). The proposed method uses the temperature dependence of thermal conductivity of the material. The method is analytic in nature and does not require any iteration as opposed to the existing state-of-the-art model. This analytic method can easily include the available scaling relations relevant to specific technology to estimate the junction temperatures and thermal resistances of the corresponding transistors. The analytic model is tested against iterative self-consistent solutions for simple structures without any trench isolation and for structures corresponding to the ST Microelectronics B9MW technology that includes shallow and deep trench isolations. The model is slightly modified in order to include the effects from the back-end-of-line metal layers. The resulting analytic model is validated against the measured results for silicon germanium HBTs fabricated in ST Microelectronics B9MW technology.
24 September 2020 in IEEE Transactions on Electron Devices
Terahertz (THz) silicon-based electronics is undergoing rapid developments. In order to keep this momentum high, an accurate and optimized on-wafer characterization procedure needs to be developed. While evaluating passive elements, the measured s-parameter data can be verified by a direct use of EM simulation tools. However, this verification requires to precisely introduce part of the measurement environment such as the probes, pads, and access lines to accurately predict the impact of calibration and layout for on-wafer measurements. Unfortunately, this procedure is limited to passive elements. Hence, in this work, we propose a new procedure to emulate the measurement of active devices using an electromagnetic SPICE cosimulation. By this method, one can clearly highlight that a measurement artifact that was observed for the transistor measurement can be reproduced. One of the most representative examples of measurement artifact involves the measurement and estimation of fMAX which is not constant over all frequency bands. Also, the measurement is difficult to perform above 40 GHz. This typical problem is now undoubtedly attributed to the probe-to-substrate coupling and probe-to-probe coupling which are strongly dependent on the probe geometry. Finally, this cosimulation procedure evidently underlines the need for an optimized deembedding procedure above 200 GHz.
22 July 2016 in IEEE Transactions on Electron Devices
In this paper, we present extensive characterization of low-frequency noise in advanced silicon germanium heterojunction bipolar transistors. We demonstrate the extraction methodology of base and collector noise spectral densities for a wide range of transistor geometries. In addition to 1/f noise, generation-recombination (G-R) mechanisms are observed at low bias in the base current noise. Their existence is confirmed by Random Telegraph Signal (RTS) noise measurements. 1/f and G-R components are extracted from the base current noise spectra and their bias dependencies are studied. Finally, base current noise spectral densities measured at the same base current density in different geometries are compared to study the individual contribution of 1/f noise from the periphery as well as the intrinsic device. Part II of this paper will discuss the modeling aspects and noise correlation.