To a certain degree, composite railway sleepers and bearers have been recently employed as a replacement for conventional timber sleepers. Importantly, attributed to the rise in traffic demand, structural health monitoring of track structural members is essential to improve the maintenance regime and reduce risks imposed by any structural damage. A potential modern technique for detecting damage in railway components by using energy waves is called acoustic emission (AE). This technique has been widely used for concrete structures in other engineering applications, but the application for composites is relatively limited. Recently, fiber-reinforced foamed urethane (FFU) composites have been utilized as railway sleepers and bearers for applications in the railway industry. Neither does a design standard exist, nor have the inspection and monitoring criteria been properly established. In this study, three-point bending tests were performed together with using the AE method to detect crack growth in FFU composite beams. The ultimate state behaviors are considered to obtain the failure modes. This paper is thus the world’s first to focus on damage detection approaches for FFU composite beams using AE technology, additionally identifying the load-deflection curves of the beams. According to the experimental results, it is apparent that the failure modes of FFU composite beams are likely to be in brittle modes. Through finite element method, the results were in good agreement with less than 0.14% discrepancy between the experimental and numerical data. The attractive insights into an alternative technique for damage assessment of the composite components will help railway engineers to establish structural monitoring guidelines for railway composite sleepers and bearers.
Dynamic behaviors of composite railway sleepers and bearers in railway switches and crossings are not well-known and have never been thoroughly investigated. In fact, the dynamic properties of the full-scale composite sleepers and bearers are not available in practice. Importantly, the deteriorated condition or even the failure of composite materials and components in the railway system can affect the functional limitations or serviceability of the switches and crossings. Especially, it is important to identify the dynamic modal parameters of Fiber-reinforced Foamed Urethane (FFU) composite railway sleepers and bearers so that track engineers can adequately design and optimize the structural components with their superior properties, for benchmarking with the conventional sleepers and bearers. This paper is the world’s first to investigate the vibration characteristics of full-scaled FFU composite beams in healthy and damaged conditions, using the impact hammer excitation technique. This study also determines the dynamic elastic modulus of FFU composite beams from experimental dynamic measurements. It is found that the first bending mode in a vertical plane obviously is the first dominant mode of resonance under a free-free condition. The dynamic modal parameters reduce when damages occur. In this study, finite-element modeling has been used to establish a realistic dynamic model of the railway track incorporating FFU composite sleepers and bearers. Then, numerical simulations and experimental campaigns have been performed to enable new insights into the dynamic behaviors of composite sleepers and bearers. These insights are fundamental to the performance benchmarking as well as the development of vibration-based condition monitoring and inspection for predictive track maintenance.