Ana García

Ms. Ana García

AIJU,Technological Institute for children´s products & leisure
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2020 in Polymers
Verified
Journal Article
Open access
PDF file
AGAna García
Ana García
AGAsunción Martínez García
Asunción Martínez García
SFSantiago Ferrandiz
Santiago Ferrandiz
This article is focused on the development of a series of biodegradable and eco-friendly biocomposites based on starch polymer (Mater-Bi DI01A) filled with 30 wt% almond shell (AS) of different varieties (Desmayo Rojo, Largueta, Marcona, Mollar, and a commercial mixture of varieties) to study the influence of almond variety in the properties of injected biodegradable parts. The different AS varieties are analysed by means of Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Scanning Electron Microscopy (SEM), and X-ray Diffraction (XRD). The biocomposites are prepared in a twin-screw extruder and characterized in terms of their mechanical (tensile, flexural, Charpy impact, and hardness tests) and thermal properties (differential scanning calorimetry (DSC) and TGA). Despite observing differences in the chemical composition of the individual varieties with respect to the commercial mixture, the results obtained from the mechanical characterisation of the biocomposites do not present significant differences between the diverse varieties used. From these results, it was concluded that the most recommended option is to work with the commercial mixture of almond shell varieties, as it is easier and cheaper to acquire.

1 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
AGAna García
Ana García
LCLinda Catani
Linda Catani
AGAsunción Martínez García
Asunción Martínez García
In this study, binary blends of biodegradable polymers were prepared to improve the ductile properties of those that have a more rigid and/or brittle behaviour. Specifically, PLA, PHA and TPS were blended with different amounts of PBS with the objective of reducing the stiffness and brittleness of the three polymers. The compatibility of the blends and their resulting mechanical properties were studied. The flexibility of the blends increased with the addition of PBS; however, a limited compatibility was achieved, leading to a low impact resistance improvement. For this reason, other blend options with an EVA-based material were studied, increasing the impact resistance and flexibility of the PLA material in this case.

30 January 2021 in Waste and Biomass Valorization
Verified
Journal Article
Closed access
PDF file
AGAna García
Ana García
AMA. Martínez-García
A. Martínez-García
SFSantiago Ferrandiz
Santiago Ferrandiz

5 April 2021 in Polymers
Verified
Journal Article
Open access
PDF file
AGAna García
Ana García
AGAsunción Martínez García
Asunción Martínez García
SFSantiago Ferrandiz
Santiago Ferrandiz
This article is focused on studying the effect of the reprocessing cycles on the mechanical, thermal, and aesthetic properties of a biocomposite. This process is based on starch thermoplastic polymer (TPS) filled with 20 wt% almond shell powder (ASP) and epoxidized linseed oil (ELO) as a compatibilizing additive. To do so, the biocomposite was prepared in a twin-screw extruder, molded by injection, and characterized in terms of its mechanical, thermal, and visual properties (according to CieLab) and the melt flow index (MFI). The analyses carried out were tensile, flexural, Charpy impact tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of the reprocessing were also studied for the biodegradable unfilled TPS polymer. The results showed that TPS and TPS/ASP biocomposite suffer changes progressively on the properties studied after each reprocessing cycle. Furthermore, it was observed that the addition of ASP intensified these effects regarding TPS. However, in spite of the progressive degradation in both cases, it is technically feasible to reprocess the material at least three times without needing to incorporate virgin material.

25 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
AGAna García
Ana García
RPRaquel Berbegal Pina
Raquel Berbegal Pina
Rosario VidalRosario Vidal
Rosario Vidal
AGAsunción Martínez García
Asunción Martínez García
This article is focused on the development and characterization of a series of biodegradable and eco-friendly colour masterbatches (MBs), based on natural pigments and biodegradable polylactic acid (PLA) and polybutylene succinate (PBS). Four commercial natural pigments were used, spirulina, curcumin, beetroot and chlorophyllin, to develop the colour masterbatches using a twin-screw extruder. The natural pigment-based MBs were added at 2, 4 and 6 wt%, as additives to study the effect on the properties of injected biodegradable parts (PLA and PBS). The injected samples were characterized in terms of their mechanical (tensile and Charpy impact tests) and visual properties (according to CieLab). In addition, the ageing of the coloured material was followed by colorimetric analysis after its exposure under a Xenon lamp. The mechanical results showed that the addition of coloured masterbatches in different percentages (2–6 wt%) did not significantly change the properties of the materials with respect to the as-received ones. A noticeable colour difference in the injected samples was observed after the first 50 h of artificial light exposure. Regarding environmental concerns, the study showed that the carbon footprint of natural pigments and electricity consumption during extrusion and pelletizing were lower.

17 October 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
AGAsunción Martínez García
Asunción Martínez García
AGAna García
Ana García
MCMiguel Angel León Cabezas
Miguel Angel León Cabezas
JGJosefa Galvañ-Gisbert
Josefa Galvañ-Gisbert
The influence of bagasse fibres from beer manufacturing in mechanical, thermal, and rheological properties of three polymers (BioPE, PLA, and PP) has been studied in order to develop new environmentally friendly biocomposites for injection moulding applications. Totals of 10 wt%, 20 wt%, and 30 wt% of bagasse fibre (BSG) were added to the polymers by extrusion compounding, adding specific compatibilising additives, and injected samples were mechanically characterised by tensile, Charpy impact, and hardness tests. In addition, the fractures obtained after the impact test were observed using scanning electron microscopy (SEM) to assess the compatibility matrix filler. Characterisation of the thermal properties is also carried out by using differential scanning calorimetry (DSC) and thermogravimetry (TGA). Additionally, melt flow index of the biocomposites is also studied. An increase in the rigidity of the BioPE and PP composites was produced with the increase in BSG content, dealing with a decrease in maximum strain and impact resistance; whereas, in the filled BGS PLA biocomposites, Young’s modulus was lower than that of the PLA material, improving the ductility of the PLA-BGS formulations. Compatibilisation effect was, therefore, different in the nine developed formulations, and the BGS content also influenced their thermal, mechanical, and rheological behaviours.