María Jordá Reolid

Ms. María Jordá Reolid

Innovative materials and manufacturing, Aiju, Alicante, Valencia, Spain
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
Jaume Gomez-CaturlaJaume Gomez-Caturla
Jaume Gomez-Caturla
JIJuan Ivorra-Martinez
Juan Ivorra-Martinez
Pablo StefaniPablo Stefani
Pablo Stefani
SRSandra Rojas-Lema
Sandra Rojas-Lema
Luis Quiles-CarrilloLuis Quiles-Carrillo
Luis Quiles-Carrillo
The present study reports on the development of wood plastic composites (WPC) based on micronized argan shell (MAS) as a filler and high-density polyethylene obtained from sugarcane (Bio-HDPE), following the principles proposed by the circular economy in which the aim is to achieve zero waste by the introduction of residues of argan as a filler. The blends were prepared by extrusion and injection molding processes. In order to improve compatibility between the argan particles and the green polyolefin, different compatibilizers and additional filler were used, namely polyethylene grafted maleic anhydride (PE-g-MA 3 wt.-%), maleinized linseed oil (MLO 7.5 phr), halloysite nanotubes (HNTs 7.5 phr), and a combination of MLO and HNTs (3.75 phr each). The mechanical, morphological, thermal, thermomechanical, colorimetric, and wettability properties of each blend were analyzed. The results show that MAS acts as a reinforcing filler, increasing the stiffness of the Bio-HDPE, and that HNTs further increases this reinforcing effect. MLO and PE-g-MA, altogether with HNTs, improve the compatibility between MAS and Bio-HDPE, particularly due to bonds formed between oxygen-based groups present in each compound. Thermal stability was also improved provided by the addition of MAS and HNTs. All in all, reddish-like brown wood plastic composites with improved stiffness, good thermal stability, enhanced compatibility, and good wettability properties were obtained.

1 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
AGAna García
Ana García
LCLinda Catani
Linda Catani
AGAsunción Martínez García
Asunción Martínez García
In this study, binary blends of biodegradable polymers were prepared to improve the ductile properties of those that have a more rigid and/or brittle behaviour. Specifically, PLA, PHA and TPS were blended with different amounts of PBS with the objective of reducing the stiffness and brittleness of the three polymers. The compatibility of the blends and their resulting mechanical properties were studied. The flexibility of the blends increased with the addition of PBS; however, a limited compatibility was achieved, leading to a low impact resistance improvement. For this reason, other blend options with an EVA-based material were studied, increasing the impact resistance and flexibility of the PLA material in this case.

4 November 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SCSilvia Carichino
Silvia Carichino
DSDino Scanferla
Dino Scanferla
Daniela FicoDaniela Fico
Daniela Fico
DRDaniela Rizzo
Daniela Rizzo
Francesca FerrariFrancesca Ferrari
Francesca Ferrari
Carola Esposito CorcioneCarola Esposito Corcione
Carola Esposito Corcione
Beer bagasse is a residue waste produced in great amounts; nevertheless, it is still underestimated in the industry. The aim of this paper is to develop an innovative and efficient methodology to recycle the beer bagasse by producing Poly-lactic acid(PLA)-based bio-composites, in the forms of pellets and filaments, to be used in additive manufacturing processes. To assess the suitability of beer bagasse for extrusion-based 3D printing techniques, it was, firstly, physically and chemically characterized. Then, it was added in combination with different kinds of plasticizers to PLA to make bio-composites, analyzing their thermal and physical properties. The results prove the great potential of bagasse, evidencing its printability. Both composites’ pellets and filaments were used in two different 3D printing machines and the mechanical properties of the 3D-printed models were evaluated as a function of the composition and the kind of technology used. All the used plasticizers improved processability and the polymer–bagasse interface. Compared to neat PLA, no changes in thermal properties were detected, but a lowering of the mechanical properties of the 3D-printed composites compared to the neat polymers was observed. Finally, a comparison between the efficiency of the two 3D printing techniques to be used with the bio-based composites was performed.

10 August 2019 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
SMSergi Montava
Sergi Montava
Rafael BalartRafael Balart
Rafael Balart
DLDiego Lascano
Diego Lascano
Nestor MontanesNestor Montanes
Nestor Montanes
Luis Quiles-CarrilloLuis Quiles-Carrillo
Luis Quiles-Carrillo
This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephthalate) (bioPET) and fully bio-based poly(amide) 10,10 (bioPA1010). These blends are manufactured by extrusion and subsequent injection moulding and characterized in terms of mechanical, thermal and thermomechanical properties. To overcome or minimize the immiscibility, a glycidyl methacrylate copolymer, namely poly(styrene-ran-glycidyl methacrylate) (PS-GMA; Xibond™ 920) was used. The addition of 30 wt % bioPA provides increased renewable content up to 50 wt %, but the most interesting aspect is that bioPA contributes to improved toughness and other ductile properties such as elongation at yield. The morphology study revealed a typical immiscible droplet-like structure and the effectiveness of the PS-GMA copolymer was assessed by field emission scanning electron microcopy (FESEM) with a clear decrease in the droplet size due to compatibilization. It is possible to conclude that bioPA1010 can positively contribute to reduce the intrinsic stiffness of bioPET and, in addition, it increases the renewable content of the developed materials.

20 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
VMVirginia Moreno
Virginia Moreno
AGAsunción Martínez García
Asunción Martínez García
Jose CovasJose Covas
Jose Covas
Jaume Gomez-CaturlaJaume Gomez-Caturla
Jaume Gomez-Caturla
Luis Quiles-CarrilloLuis Quiles-Carrillo
Luis Quiles-Carrillo
In this study, a new composite material is developed using a semi bio-based polypropylene (bioPP) and micronized argan shell (MAS) byproducts. To improve the interaction between the filler and the polymer matrix, a compatibilizer, PP-g-MA, is used. The samples are prepared using a co-rotating twin extruder followed by an injection molding process. The addition of the MAS filler improves the mechanical properties of the bioPP, as evidenced by an increase in tensile strength from 18.2 MPa to 20.8 MPa. The reinforcement is also observed in the thermomechanical properties, with an increased storage modulus. The thermal characterization and X-ray diffraction indicate that the addition of the filler leads to the formation of α structure crystals in the polymer matrix. However, the addition of a lignocellulosic filler also leads to an increased affinity for water. As a result, the water uptake of the composites increases, although it remains relatively low even after 14 weeks. The water contact angle is also reduced. The color of the composites changes to a color similar to wood. Overall, this study demonstrates the potential of using MAS byproducts to improve their mechanical properties. However, the increased affinity with water should be taken into account in potential applications.

17 October 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MRMaría Jordá Reolid
María Jordá Reolid
AGAsunción Martínez García
Asunción Martínez García
AGAna García
Ana García
MCMiguel Angel León Cabezas
Miguel Angel León Cabezas
JGJosefa Galvañ-Gisbert
Josefa Galvañ-Gisbert
The influence of bagasse fibres from beer manufacturing in mechanical, thermal, and rheological properties of three polymers (BioPE, PLA, and PP) has been studied in order to develop new environmentally friendly biocomposites for injection moulding applications. Totals of 10 wt%, 20 wt%, and 30 wt% of bagasse fibre (BSG) were added to the polymers by extrusion compounding, adding specific compatibilising additives, and injected samples were mechanically characterised by tensile, Charpy impact, and hardness tests. In addition, the fractures obtained after the impact test were observed using scanning electron microscopy (SEM) to assess the compatibility matrix filler. Characterisation of the thermal properties is also carried out by using differential scanning calorimetry (DSC) and thermogravimetry (TGA). Additionally, melt flow index of the biocomposites is also studied. An increase in the rigidity of the BioPE and PP composites was produced with the increase in BSG content, dealing with a decrease in maximum strain and impact resistance; whereas, in the filled BGS PLA biocomposites, Young’s modulus was lower than that of the PLA material, improving the ductility of the PLA-BGS formulations. Compatibilisation effect was, therefore, different in the nine developed formulations, and the BGS content also influenced their thermal, mechanical, and rheological behaviours.