Abrasive water jet (AWJ) breaking technology is suitable for the maintenance and repair of concrete structures, generating minimal dust, low tool wear, and no vibrations or selective destruction. The failure features and mechanisms of concrete subjected to AWJ impact are fundamental issues of AWJ breaking technology, which are also related to the safety and quality of engineering construction. Based on computed tomography (CT), scanning electron microscopy (SEM), and image processing technology, this paper studied the fragmentation pattern and removal mechanism of concrete under AWJ impact. The general failure characteristics and crack propagation law of concrete subjected to AWJ impact were described through AWJ impact concrete tests. The spatial distribution of damage in concrete subjected to AWJ impact can be divided into the intensive action zone, the transition zone, and the weak action zone. The removal mechanism of AWJ was discussed by comparing the impact performance of a pure water jet (PWJ) system. The results indicate that abrasive particles can cause cliff‐shaped fracture and lip‐shaped distortion in the aggregate part and flat fracture surface in the matrix part. There is no obvious crack in the interfacial transition zone (ITZ) due to the weakening of the water wedge effect.
8 May 2023 in Archives of Civil and Mechanical Engineering
Based on smooth particle hydrodynamics (SPH) method, this paper carried out the numerical simulation of ultra‐high‐pressure water jet (UHP‐WJ) impacting steel fiber reinforced concrete (SFRC), verified the established numerical model by UHP‐WJ impacting SFRC and computed tomography (CT) scanning experiments, and explored breaking mechanism and damage evolution rule of SFRC impacted by UHP‐WJ. Results indicate that in the weak effect zone of steel fiber, the failure of concrete is generated and developed along the axial direction of UHP‐WJ into a bowl‐shaped crater with the combining action of compressive stress and shear stress. In the affected area of steel fiber, due to the inhomogeneity in the contact area of steel fiber and concrete, the stress concentration in the contact area is produced, causing the formation of propagated crack along the steel fiber. And the steel fiber has an obstruction effect on the development of broken bodies on the upper and lower sides of steel fiber. With the sustained action of UHP‐WJ, the steel fiber in the intense radiation area of stress waves takes place fracture and finally the broken bodies on the upper and lower sides of steel fiber fuse. In addition, based on the CT scans and digital image processing technology, this paper also comparatively analyzed the internal fragmentations of SFRC and the ordinary concrete subjected to UHP‐WJ impact, and it is found that compared with the ordinary concrete, there is smaller dimension of crater and it is difficult to engender macrocrack for SFRC, with lower damage and higher damage attenuation speed along the axial and radial directions.
Abrasive Water Jet (AWJ) technology has vast application prospects in the assisted drill‐blasting of tunnel excavation, with the advantages of fast‐breaking speed, low tool wear, less dust, and good mobility. Nevertheless, AWJ technology has some limitations and shortcomings, such as the small effective fracturing range and parameter mismatch, which influence the fracturing effect of AWJ. To solve the abovementioned issues, it is necessary to study the failure mechanism of rock impacted by AWJ and nozzle parameter effects on rock fragmentation. Based on the coupling algorithm of Smooth Particle Hydrodynamics and Finite Element Method (SPH‐FEM), in this research, the numerical model of AWJ impacting rock was established, and the result was verified with Computed Tomography (CT) scanning after the AWJ impacting rock experiment and image processing technology. Through the analysis of the stress characteristics of typical particles in the rock model at different stages and positions, the formation and expansion mechanisms of the crater and the cracks were revealed. Additionally, in this research, the comprehensive damage factor of rock (X) representing the fragmentation degree was defined. By comparatively analyzing X‐values with certain technical parameters of AWJ, the importance ranking of the nozzle parameters, the effect of each nozzle parameter on the rock fragmentation, and the optimal parameter combination were also investigated.
The risk of gas disaster in the low-gas tunnel is easy to be ignored. By tracking and analyzing the gas monitoring data of the low-gas tunnel, it is found that the cyclic abnormal gas emission occurred many times during the construction period, leading to local gas accumulation, which greatly increases the risk of gas explosion accidents. To scientifically predict the abnormal gas emission in low-gas tunnels, the idea of K-line diagram-based prediction of abnormal gas emission in low-gas tunnels is put forward, and in combination with the field monitoring data of low-gas tunnel (Huangguashan Tunnel), the prediction results with different prediction indexes of K-line diagram are compared and analyzed. The results show that the K-line diagram can reflect the changing trend of gas concentration in real time accurately and show the change law of gas concentration during different construction processes; the moving average (MA) of the K-line diagram can accurately reflect the time of abnormal gas emission, the moving average convergence divergence (MACD) index can reflect the upward or downward power and trend of gas, and the Bollinger Band (BOLL) index can reflect the fluctuation range of gas concentration. The research results can provide a reference for the prediction and prevention of abnormal gas emission in low-gas tunnels.