Hydraulic fracturing is an important technique for increasing coal seam permeability and productivity of CBM (coalbed methane). As a common type of faulted structure in the coal seam, the fault has a direct impact on the direction and scope of hydrofracture propagation, weakening fracturing effects. To study the propagation laws of a hydrofracture meeting a fault in the coal seam, based on a two-dimensional model of a hydrofracture meeting a fault, the combined elastic mechanics and fracture mechanics, the propagation mode, critical internal water pressure, and influencing factors were analyzed. A numerical simulation on the propagation laws of hydrofracture meeting a fault was conducted by using the coupling system of flow and solid in the rock failure process analysis (RFPA2D-Flow). The results show that the horizontal crustal stress difference, the intersection angle between hydrofracture and fault plane, and the physical mechanics characteristics of coal-rock bed are the main factors influencing fracture propagation. With a decrease of horizontal crustal stress differences, intersection angle and an increase of roof elasticity modulus, it is easier for the footwall hydrofracture to enter the hanging wall along the bedding plane, forming an effective fracture. When the stress difference is large and the dip angle of fault plane surpasses 45°, the hydrofracture is easy to propagate towards the coal roof and floor by going through the fault plane. At this time, the coal seams of the footwall and the hanging wall should be fractured respectively to ensure fracturing effects, and the support of the roof and floor should be strengthened. The field experiment, theoretical analysis and numerical simulation were consistent in their results, which will contribute to the optimization of hydraulic fracturing and the prediction of hydrofracture in the coal seams containing faults.
22 October 2015 in Tehnicki vjesnik - Technical Gazette
Laboratory tests were conducted to study coal spontaneous combustion at low-temperature (30 ÷ 200 °C) in the air of reduced oxygen (10 ÷ 21 %) and low methane concentrations (0 ÷ 3 %). The production of carbon monoxide in coal...
The risk of gas disaster in the low-gas tunnel is easy to be ignored. By tracking and analyzing the gas monitoring data of the low-gas tunnel, it is found that the cyclic abnormal gas emission occurred many times during the construction period, leading to local gas accumulation, which greatly increases the risk of gas explosion accidents. To scientifically predict the abnormal gas emission in low-gas tunnels, the idea of K-line diagram-based prediction of abnormal gas emission in low-gas tunnels is put forward, and in combination with the field monitoring data of low-gas tunnel (Huangguashan Tunnel), the prediction results with different prediction indexes of K-line diagram are compared and analyzed. The results show that the K-line diagram can reflect the changing trend of gas concentration in real time accurately and show the change law of gas concentration during different construction processes; the moving average (MA) of the K-line diagram can accurately reflect the time of abnormal gas emission, the moving average convergence divergence (MACD) index can reflect the upward or downward power and trend of gas, and the Bollinger Band (BOLL) index can reflect the fluctuation range of gas concentration. The research results can provide a reference for the prediction and prevention of abnormal gas emission in low-gas tunnels.
Water jet drilling (WJD) technology has been widely used to extract coalbed methane. Coal breakage features and fragment size in WJD determine the drilling efficiency. The smaller the coal fragments, the easier the fragments are discharged from hydraulic boreholes. This study discloses the coal breakage features and size distributions of fragments, field experiments under the original in‐situ stress condition were conducted to obtain the coal fragments generated in WJD. The effects of the jet pressure and coal strength on fragment size distributions were investigated based on the Weibull distribution and fractal model. The results indicate that fine particles dominate the coal fragments and its proportion increases with the increase of jet pressure and the decrease of coal strength. The fragment size distributions accord with the Weibull distribution. The breakage degree index of fragments decreases in the logarithmic form as the jet pressure increases. The coal fragments have the fractal characteristic, and the fractal dimension increases with the increasing jet pressure and decreases with the increasing coal strength. Additionally, the fractal dimension increases with the decreases in breakage degree index. This work could provide a guide for research on the coal fragments transportation and the selections of hydraulic parameters in WJD.
21 February 2026 in Geotechnical and Geological Engineering
In contiguous seam mining, the sudden large-scale collapse of a hard roof in an overlying goaf generates violent impact airflow, driving hazardous gases into the underlying working face and seriously threatening production safety. However, quantitative analysis of airflow responses under such transient impacts is rare for conventional exhaust ventilation systems, and proactive control strategies remain lacking. This study hypothesized that replacing exhaust ventilation with a forced ventilation system builds a sufficient counter-pressure gradient across the working face to block the downward migration of hazardous gases. Taking the Longhua Coal Mine as the engineering background, this study combines a theoretical velocity model of roof-collapse-induced impact airflow with numerical simulations and subsequently implements a forced ventilation system on site. Results show that under exhaust ventilation, roof collapse greatly intensifies air leakage in the goaf, causing the CO concentration at the return corner to spike to 5000 ppm within only 0.2 s. In contrast, the field-deployed forced ventilation system effectively suppresses this impact: by keeping the pressure difference across the air regulator within 338–417 Pa, the CO concentration drops from 36 ppm to below 15 ppm. Complemented by a real-time monitoring system for goaf pressure surges and hazardous gases, this strategy successfully shifts disaster control from passive ventilation to active aerodynamic suppression. This study provides a robust theoretical foundation and practical engineering reference for disaster prevention in contiguous seam mining.