Based on the Multi-Carrier Time Domain Reflectometry (MCTDR) technique, new methods which could detect, locate and characterize multiple soft faults in complex wired networks are proposed in this paper. The first method combines the MCTDR with the Multi-Layer Perceptron Neural Network (MLP-NN), the second one combines the MCTDR with the well-known genetic algorithm (GA). Furthermore, in order to allow effective monitoring without ambiguity, a branched network is diagnosed by several reflectometers (sensors) at the different extremities. The main novelty here lies in the fact that the NN and GA methods are used for data fusion from several distributed reflectometers. The needed datasets for training and testing the NN are generated by simulation using MCTDR responses. These are obtained using a numerical direct model which describes the signal propagation in the branched network. The GA is used to reduce the differences between the measured responses and the simulated responses given by the direct model. The numerical and experimental results provided at the end of the paper confirm the performance of both approaches (MCTDR-NN & MCTDR-GA) in merging data between reflectometers and in eliminating diagnosis ambiguities.
Graphitic carbon nitride (g-C3N4) based photocatalyst was synthesized and the photocatalytic performance was investigated for the removal of Eriochrome Black T (EBT) and Bromophenol Blue (BPB) under UV irradiation. The prepared materials were characterized by SEM-EDX, XRD, Raman, FTIR and DRS. Higher degradation efficiency for the same initial concentrations of EBT and BPB in presence of TiO2/g-C3N4 have been achieved within 160 min of irradiation. The kinetic study showed that the photodegradation of BPB by TiO2/g-C3N4 follows pseudo-first-order kinetics with an R2 value of 0.98. The addition of persulfate (PS) in BPB solution improved the degradation yield from 8.81% to 80.14% within 20 min of UV light irradiation. A Box-Behnken model was developed from three factors and Response surface methodology (RSM) was employed to identify the optimum conditions for the treatment of BPB solution by TiO2/g-C3N4. The experimental values of degradation of BPB agreed with predicted values obtained from central composite design (CCD) analysis with an R2 value of 0.9999. The scavenger study revealed that superoxide radical anion (O2•−) plays a key role (68.89% of contribution) followed by OH• and h+ with 22.40% and 15.55% of contribution, respectively. This study has obviously exhibited the potential of TiO2/g-C3N4 composite as a promising catalyst for photocatalytic purposes.
ZnO thin film were deposited by Spray and Spray Pyrolysis methods on glass substrates at 370 °C. The structural characterization by XRD, Raman spectroscopy, FTIR, EDS, TEM, SEM, RPE and XPS revealed the purity of ZnO Wurtzite variety in both samples. The use of a new loop reactor configuration for the photocatalytic activity was evaluated against/with respect to the degradation of two textile dyes as well as their binary mixture. The ZnO thin film prepared by Spray Pyrolysis kept its photocatalytic properties even after 20 reuse cycles (148 h). The treated solution showed better biodegradability and the absence of phytotoxicity.
Analytical methods are significantly useful tools for engineers in computational modeling. These methods provide fast simulations, while preserving physical meaning. In this paper, a full analytical formulation is developed based on the circuit approach, also known as Intermediate Level Circuit Model (ILCM), to evaluate the shielding effectiveness (SE) of metallic structures. The proposal focuses on rectangular enclosures containing apertures of complex geometrical shape, illuminated by an external plane wave. The enclosure is taken as a short-circuited waveguide. The aperture is treated as a transmission line with an intrinsic impedance that depends on the aperture polarizability, according to Bethe’s theory of small holes. The formulation easily takes into account high-order resonant modes and different apertures, such as circular, elliptical, round-ended and cross-shaped apertures. The ILCM technique reveals good agreement with a numerical full-wave method for various configurations of enclosures, covering a large range of frequencies from 0.5 GHz to 2.5 GHz, thus offering perspectives for parametric and/or optimization SE studies.