Commercialization in the meat-processing industry has emerged as one of the major agrobusiness challenges due to the large volume of wastewater produced during slaughtering and cleaning of slaughtering facilities. Slaughterhouse wastewater (SWW) contains proteins, fats, high organic contents, microbes, and other emerging pollutants (pharmaceutical and veterinary residues). It is important to first characterize the wastewater so that adequate treatment techniques can be employed so that discharge of this wastewater does not negatively impact the environment. Conventional characterization bulk parameters of slaughterhouse wastewater include pH, color, turbidity, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total organic carbon (TOC), total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), and coliform counts. Characterization studies conducted have revealed the effects of the pollutants on microbial activity of SWW through identification of toxicity of antibiotic-resistant strains of bacteria. Due to the high-strength characteristics and complex recalcitrant pollutants, treatment techniques through combined processes such as anaerobic digestion coupled with advanced oxidation process were found to be more effective than stand-alone methods. Hence, there is need to explore and evaluate innovative treatments and techniques to provide a comprehensive summary of processes that can reduce the toxicity of slaughterhouse wastewater to the environment. This work presents a review of recent studies on the characterization of SWW, innovative treatments and technologies, and critical assessment for future research.

The creation of the carbon market came forth as a tool for managing, controlling, and reducing greenhouse gas emissions, combining environmental responsibility with financial incentives. Biochar has gained recognition as one of potential carbon offset solution. The practical and cost-effective establishment of biochar carbon credit standards is crucial for the integration of biochar into carbon trading systems, thus encouraging investments in the biochar industry while promoting sustainable carbon dioxide sequestration practices on a global scale. This communication focuses on the potential of biochar in carbon sequestration. Additionally, it spotlights case studies that highlight how biochar effectively generates carbon credits, as well as discussing the evolving carbon removal marketplace. Furthermore, we address knowledge gaps, areas of concern, and research priorities regarding biochar implementation in carbon credits, with the aim of enhancing our understanding of its role in climate change mitigation. This review positions biochar as a versatile and scalable technology with the potential to contribute significantly to carbon credits, aligning with sustainable development goals. It calls for continued research, transparency, and international cooperation to explore the full potential of biochar in climate change mitigation efforts.

In the present study, we propose a new photocatalytic interface prepared by high-power impulse magnetron sputtering (HiPIMS), and investigated for the degradation of Reactive Green 12 (RG12) as target contaminant under visible light light-emitting diodes (LEDs) illumination. The CuxO/TiO2 nanoparticulate photocatalyst was sequentially sputtered on polyester (PES). The photocatalyst formulation was optimized by investigating the effect of different parameters such as the sputtering time of CuxO, the applied current, and the deposition mode (direct current magnetron sputtering, DCMS or HiPIMS). The results showed that the fastest RG12 degradation was obtained on CuxO/TiO2 sample prepared at 40 A in HiPIMS mode. The better discoloration efficiency of 53.4% within 360 min was found in 4 mg/L of RG12 initial concentration and 0.05% Cuwt/PESwt as determined by X-ray fluorescence. All the prepared samples contained a TiO2 under-layer with 0.02% Tiwt/PESwt. By transmission electron microscopy (TEM), both layers were seen uniformly distributed on the PES fibers. The effect of the surface area to volume (dye volume) ratio (SA/V) on the photocatalytic efficiency was also investigated for the discoloration of 4 mg/L RG12. The effect of the presence of different chemicals (scavengers, oxidant or mineral pollution or salts) in the photocatalytic medium was studied. The optimization of the amount of added hydrogen peroxide (H2O2) and potassium persulfate (K2S2O8) was also investigated in detail. Both, H2O2 and K2S2O8 drastically affected the discoloration efficiency up to 7 and 6 times in reaction rate constants, respectively. Nevertheless, the presence of Cu (metallic nanoparticles) and NaCl salt inhibited the reaction rate of RG12 discoloration by about 4 and 2 times, respectively. Moreover, the systematic study of reactive oxygen species’ (ROS) contribution was also explored with the help of iso-propanol, methanol, and potassium dichromate as •OH radicals, holes (h+), and superoxide ion-scavengers, respectively. Scavenging results showed that O2− played a primary role in RG12 removal; however, •OH radicals’ and photo-generated holes’ (h+) contributions were minimal. The CuxO/TiO2 photocatalyst was found to have a good reusability and stability up to 21 cycles. Ions’ release was quantified by means of inductively coupled plasma mass spectrometry (ICP-MS) showing low Cu-ions’ release.