This work deals with the reduction of aircraft interior noise using active sidewall panels (linings). Research work done in the past showed that considerable reductions of the sound pressure level (SPL) in the cabin are possible using structural actuators mounted on the lining and error microphones distributed in front of the linings. However, microphones are undesirable for error sensing because they are not suitable for the realisation of an integrated and autonomous active lining (smart lining module). Therefore, the goal of the present work is the replacement of the microphones by structural sensors. Using the structural sensors as remote sensors in combination with an acoustic filter, virtual microphones can be defined. The present study relies on experimental data of a double-walled fuselage system which is mounted in a sound transmission loss facility. Simulation results based on measured time data and identified frequency response functions are provided. Different configurations of virtual microphones are investigated regarding the SPL reduction and the induced vibration of the lining panel.
The participants of the EU-project ACASIAS develop advanced concepts for aerostructures with multifunctional capabilities. Within work package 3 an active system for noise reduction is integrated into a curved lining panel. The objective is the reduction of the interior sound pressure level by increasing the transmission loss of the lining panel. The application scope includes current propeller driven aircraft and future aircraft with counter-rotating open rotor (CROR) engines. The drawback of these CO2-efficient engines is their high sound emission in the frequency band up to 500 Hz. Active noise reduction systems are able to achieve performance in this frequency band while passive sound insulation materials fall behind. Thus, active systems are the key technology to avoid unacceptably high noise levels for passengers. During the last period of the project the main experiments are conducted. The active lining with its dimensions of 1300 × 1690 mm2 (W × H) is mounted in a setup in the acoustic transmission loss test facility of the DLR. Several tests in different categories are run to characterize the vibration and sound transmission behavior of the lining. In this paper the active lining and its components are briefly introduced and the results of the modal and the thermal testing are presented.