zhu gao

Dr. zhu gao


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2020 in Materials
Verified
Journal Article
Open access
PDF file
Xiaojian CaoXiaojian Cao
Xiaojian Cao
ZJZhu Jiangpei
Zhu Jiangpei
FGFei Gao
Fei Gao
ZGzhu gao
zhu gao
By means of the ultrasonic surface impact (amplitude of 30 μm, strike number of 48,000 times/mm2), nanograins have been achieved in the surfaces of both Ti6Al4V(TC4) and Ti3Zr2Sn3Mo25Nb(TLM) titanium alloys, mainly because of the dislocation motion. Many mechanical properties are improved, such as hardness, residual stress, and roughness. The rotating–bending fatigue limits of TC4 and TLM subjected to ultrasonic impact are improved by 13.1% and 23.7%, separately. Because of the bending fatigue behavior, which is sensitive to the surface condition, cracks usually initiate from the surface defects under high stress amplitude. By means of an ultrasonic impact tip with the size of 8 mm, most of the inner cracks present at the zone with a depth range of 100~250 μm in the high life region. The inner crack core to TC4 usually appears as a deformed long and narrow α-phase, while the cracks in TLM specimens prefer to initiate at the triple grain boundary junctions. This zone crosses the grain refined layer and the deformed coarse grain layer. With the gradient change of elastic parameters, the model shows an increase of normal stress at this zone. Combined with the loss of plasticity and toughness, it is easy to understand these fatigue behaviors.

11 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZAZhirui An
Zhirui An
FAFahram Ayar
Fahram Ayar
SSShiwen Sun
Shiwen Sun
YZYicui Zheng
Yicui Zheng
RWRuihuan Wang
Ruihuan Wang
YWYanchao Wang
Yanchao Wang
Basalt-fiber textile-reinforced engineered cementitious composite (BTR-ECC) combines favorable durability, cost-effectiveness, and mechanics, making it a viable option for structural retrofitting. Although axial behavior is well-documented, off-axis loading zones often constitute structural weak points. To address this gap, this study experimentally and theoretically examines the mechanical responses and failure mechanisms of BTR-ECC at off-axis tensile angles of 0°, 15°, 30°, and 45°. The results demonstrate that: (1) The tensile stress–strain curves exhibit a distinct trilinear characteristic (linear elastic, strain-hardening, and fracture), featuring densely distributed microcracks confined to 30–50 μm. Dominant failure modes include textile rupture, interfacial debonding and pull-out, and PVA fiber bridging. (2) With increasing angles, tensile strength at 0°, 15°, 30°, and 45° surpasses plain ECC by 84.8%, 73.6%, 52.9%, and 54.0%, respectively, confirming effective synergistic load transfer between the basalt-fiber textile and the matrix. Despite progressive strength degradation, the strain energy density remains relatively stable across all orientations, indicating robust energy dissipation capacity. (3) A phenomenological constitutive model based on the tangent modulus approach is established to describe the off-axis tensile response. The model shows good agreement with the experimental data and may serve as a reference for the analysis of BTR-ECC structures within the calibrated range of the four tested angles.

20 August 2020 in Preprints.org
Verified
Preprint
Open access
PDF file
ZGzhu gao
zhu gao
ZZZuhao Zhou
Zuhao Zhou
HAHelge I Andersson
Helge I Andersson
In this paper, we analyzed the live fish trajectory recorded from an experiment in an experimental vertical slot fishway. Combined with a numerical simulation, we demonstrated that randomness shown in fish trajectory might not merely be attributed to fish's random choices in its swimming, also could be an adaption consequence to the bulk unsteady turbulent flow structure. Simple superposing the fish trajectory on the time-averaged flow field obtained either by interpolating on discrete point measurements or numerical simulation is not an ideal method for fish movement description in fishway engineering. How to model the fish paths in transient flow and the necessity of simultaneous recording of the flow field and the fish locomotion are challenging topics. The suggested spectrum analysis of the flow field may provide a new general method to reproduce the fish trajectory in a complex turbulent flow.