The manufacturing of technical catalysts generally involves a sequence of different process steps, of which co-precipitation is one of the most important. In this study, we investigate how continuous co-precipitation influences the properties of Cu/ZnO/ZrO2 (CZZ) catalysts and their application in the direct synthesis of dimethyl ether (DME) from CO2/CO/H2 feeds. We compare material characteristics investigated by means of XRF, XRD, N2 physisorption, H2-TPR, N2O-RFC, TEM and EDXS as well as the catalytic properties to those of CZZ catalysts prepared by a semi-batch co-precipitation method. Ultra-fast mixing in continuous co-precipitation results in high BET and copper surface areas as well as in improved metal dispersion. DME synthesis performed in combination with a ferrierite-type co-catalyst shows correspondingly improved productivity for CZZ catalysts prepared by the continuous co-precipitation method, using CO2-rich as well as CO-rich syngas feeds. Our continuous co-precipitation approach allows for improved material homogeneity due to faster and more homogeneous solid formation. The so-called “chemical memory” stamped during initial co-precipitation is kept through all process steps and is reflected in the final catalytic properties. Furthermore, our continuous co-precipitation approach may be easily scaled-up to industrial production rates by numbering-up. Hence, we believe that our approach represents a promising contribution to improve catalysts for direct DME synthesis.
Catalyst systems for the conversion of synthesis gas, which are tolerant to fluctuating CO/CO 2 gas compositions, have great potential for process-technical applications, related to the expected changes in the synthesis gas supply.
In order to enable science‐ and knowledge‐based adaptation of catalyst materials to new demands, e.g., methanol synthesis from CO2, a modified method to prepare Cu/Zn‐based catalysts based on the strict consecutive execution of co‐precipitation and aging is investigated. By successfully stabilizing the initial co‐precipitate, two mixing regimes are revealed: regarding slow mixing, the particle size of the co‐precipitate decreases with increasing volume flow. By contrast, co‐precipitation is no longer influenced by mixing for sufficiently high volume flows. While aging can be accelerated by forming smaller aggregates in the co‐precipitation, the final state is found to be defined by thermodynamic equilibrium alone. Furthermore, the microstructure of the final catalyst was influenced and the performance in direct dimethyl ether synthesis was improved by adjusting the mixing in the co‐precipitation. We believe that the approach could be scaled‐up to industrial production rates and, hence, is promising to make methanol synthesis from CO2 more effective and sustainable.
2 January 2022 in Reaction Chemistry & Engineering
Aging is one of the key steps in the preparation of highly active Cu/ZnO-based catalysts for use in the production of methanol. If certain pH and temperature specifications are met, an initially amorphous precipitate transforms into the crystalline precursor phase of zincian malachite, which is characterized by a periodic arrangement of Cu and Zn atoms and has proven advantageous for the quality of the final catalyst. However, aging generally takes between 30 min and multiple hours until the desired phase transformation is completed. With our study, we show that aging can be significantly accelerated by seeding the freshly precipitated suspension with already aged zincian malachite crystals: the necessary aging time was reduced by 41% for seeding mass fractions as low as 3 wt.% and from 83 min to less than 2 min for 30 wt.% seeds. No negative influence of seeding on the phase composition, specific surface area, molar metal ratios, or the morphology of the aged precursor could be identified. Consequently, the catalyst performance in the synthesis of methanol from CO2, as well as from a CO/CO2 mixture, was identical to a catalyst from an unseeded preparation and showed small advantages compared to a commercial sample. Thus, we conclude that seeding is a vital tool to accelerate the preparation of all Cu/Zn-based catalysts while maintaining product quality, presumably also on an industrial scale.
1 August 2024 in Industrial & Engineering Chemistry Research