A three-site mean-field extended microkinetic model was developed based on ab initio DFT calculations from the literature, in order to simulate the conversion of syngas (H2/CO/CO2) to methanol on Cu (211) and Cu/Zn (211). The reaction network consists of 25 reversible reactions, including CO and CO2 hydrogenation to methanol and the water-gas shift reaction. Catalyst structural changes are also considered in the model. Experiments were performed in a plug flow reactor on Cu/ZnO/Al2O3 at various gas hourly space velocities (24–40 L h−1 gcat−1), temperatures (210–260 °C), pressures (40–60 bar), hydrogen feed concentrations (35–60% v/v), CO feed concentrations (3–30% v/v), and CO2 feed concentrations (0–20% v/v). These experiments, together with experimental data from the literature, were used for a broad validation of the model (a total of 690 points), which adequately reproduced the measurements. A degree of rate control analysis showed that the hydrogenation of formic acid is the major rate controlling step, and formate is the most sensitive surface species. The developed model contributes to the understanding of the reaction kinetics, and should be applicable for industrial processes (e.g. scale-up and optimization).
The manufacturing of technical catalysts generally involves a sequence of different process steps, of which co-precipitation is one of the most important. In this study, we investigate how continuous co-precipitation influences the properties of Cu/ZnO/ZrO2 (CZZ) catalysts and their application in the direct synthesis of dimethyl ether (DME) from CO2/CO/H2 feeds. We compare material characteristics investigated by means of XRF, XRD, N2 physisorption, H2-TPR, N2O-RFC, TEM and EDXS as well as the catalytic properties to those of CZZ catalysts prepared by a semi-batch co-precipitation method. Ultra-fast mixing in continuous co-precipitation results in high BET and copper surface areas as well as in improved metal dispersion. DME synthesis performed in combination with a ferrierite-type co-catalyst shows correspondingly improved productivity for CZZ catalysts prepared by the continuous co-precipitation method, using CO2-rich as well as CO-rich syngas feeds. Our continuous co-precipitation approach allows for improved material homogeneity due to faster and more homogeneous solid formation. The so-called “chemical memory” stamped during initial co-precipitation is kept through all process steps and is reflected in the final catalytic properties. Furthermore, our continuous co-precipitation approach may be easily scaled-up to industrial production rates by numbering-up. Hence, we believe that our approach represents a promising contribution to improve catalysts for direct DME synthesis.
The isomerization of glucose-containing hydrolysates to fructose is a key step in the process from lignocellulosic biomass to the platform chemical hydroxymethylfurfural. We investigated the isomerization reaction of glucose to fructose in water catalyzed by hydrotalcite. Catalyst characterization was performed via IR, XRD, and SEM. Firstly, glucose solutions at pH-neutral conditions were converted under variation of the temperature, residence time, and catalyst loading, whereby a maximum of 25 wt.% fructose yield was obtained at a 38 wt.% glucose conversion. Secondly, isomerization was performed at pH = 2 using glucose solutions as well as glucose-containing hydrolysates from lignocellulosic biomass. Under acidic conditions, the hydrotalcite loses its activity for isomerization. Consequently, it is unavoidable to neutralize the acidic hydrolysate before the isomerization step with an inexpensive base. As a neutralizing agent NaOH is preferred over Ba(OH)2, since higher fructose yields are achieved with NaOH. Lastly, a pH-neutral hydrolysate from lignocellulose was subjected to isomerization, yielding 16 wt.% fructose at a 32 wt.% glucose conversion. This work targets the application of catalytic systems on real biomass-derived samples.
Catalyst systems for the conversion of synthesis gas, which are tolerant to fluctuating CO/CO 2 gas compositions, have great potential for process-technical applications, related to the expected changes in the synthesis gas supply.
Experimental and numerical kinetic investigations for the direct DME synthesis resulted in one of the predictive models with the broadest range of validity in the open literature for the CZA/γ-Al2O3 system.
17 December 2021 in Reaction Chemistry & Engineering