Stationary battery systems are becoming increasingly common worldwide. Energy storage is a key technology in facilitating renewable energy market penetration and battery energy storage systems have seen considerable investment for this purpose. Large battery installations such as energy storage systems and uninterruptible power supplies can generate substantial heat in operation, and while this is well understood, the thermal management systems that currently exist have not kept pace with stationary battery installation development. Stationary batteries operating at elevated temperatures experience a range of deleterious effects and, in some cases, serious safety concerns can arise. Optimal thermal management prioritizes safety and balances costs between the cooling system and battery degradation due to thermal effects. Electric vehicle battery thermal management has undergone significant development in the past decade while stationary battery thermal management has remained mostly stagnant, relying on the use of active and passive air cooling. Despite being the default method for thermal management, there is an absence of justifying research or comparative reviews. This literature review seeks to define the role of stationary battery systems in modern power applications, the effects that heat generation and temperature have on the performance of these systems, thermal management methods, and future areas of study.
Stationary battery systems are becoming more prevalent around the world, with both the quantity and capacity of installations growing at the same time. Large battery installations and uninterruptible power supply can generate a significant amount of heat during operation; while this is widely understood, current thermal management methods have not kept up with the increase of stationary battery installations. Active cooling has long been the default approach of thermal management for stationary batteries; however, there is no academic research or comparative studies available for this technology. The present work presents assessment of different active cooling methods through an experimentally validated computational fluid dynamics simulation. Following model validation, several cooling system configurations were analyzed, including effects from implementing either a perforated vent plate or vortex generators. The vent plate was observed to greatly increase cooling performance while simultaneously promoting temperature uniformity between batteries. Vortex generators were shown to marginally increase cooling performance, yet, future research is recommended to study the effects and improvement of the design. The average battery temperature for the vented model is reduced by approximately 5.2 °C, while the average temperature differential among the batteries was only 2.7 °C, less than the recommend value (3 °C) by ASHRAE/IEEE Standards.