Hydrogen production is one of the best solutions to the growing energy concerns, owing to its clean and sustainable assets. The current review gives an overview of various hydrogen production technologies, highlighting solar water splitting as a promising approach for its sustainable production. Moreover, it gives a detailed mechanism of the water-splitting reaction and describes the significance of titania-based catalysts for solar water splitting. It further highlights diversified strategies to improve the catalytic efficiency of TiO2 for the enhanced hydrogen production. These strategies include the doping of TiO2, dye sensitization, and the addition of co-catalysts. Doping reduces the bandgap by generating new energy levels in TiO2 and encourages visible-light absorption. Sensitization with dyes tunes the electronic states, which in turn broadens the light-absorption capacity of titania. Constructing heterojunctions reduces the charge recombination of TiO2, while co-catalysts increase the number of active sites for an enhanced reaction rate. Thus, every modification strategy has a positive impact on the stability and photocatalytic efficiency of TiO2 for improved water splitting. Lastly, this review provides a comprehensive description and future outlook for developing efficient catalysts to enhance the hydrogen production rate, thereby fulfilling the energy needs of the industrial sector.
To eliminate imidacloprid insecticide from wastewater, nanocalcite was grafted onto the surface of pretreated polyester fabric. The process of seeding was followed by the low temperature hydrothermal method for the growth of nanocalcite for the functionalization of fabric. The goal of this study was to improve the hydrophilicity of the nanocalcite photocatalyst that had been grafted onto the surface of polyester fabric (PF) using acidic and basic prewetting techniques. The morphological characteristics, crystalline nature, surface charge density, functional groups of surface-modified nanocalcite @ PF were determined via SEM, XRD, FTIR, and Zeta potential (ZP), respectively. Characterization results critically disclosed surface roughness due to excessive induction of hydroxyl groups, rhombohedral crystal structure, and high charge density (0.721 mS/cm). Moreover, contact angle of nanocalcite @ PF was calculated to be 137.54° while after acidic and basic prewetting, it was reduced to 87.17° and 48.19°. Similarly, bandgap of the as fabricated nanocalcite was found to be 3.5 eV, while basic prewetted PF showed a reduction in band gap (2.9 eV). The solar photocatalytic mineralization of imidacloprid as a probe pollutant was used to assess the improvement in photocatalytic activity of nanocalcite @ PF after prewetting. Response surface methodology was used to statistically optimize the solar exposure time, concentration of the oxidant, and initial pH of the reaction mixture. Maximum solar photocatalytic degradation of the imidacloprid was achieved by basic prewetted nanocalcite @ PF (up to 91.49%), which was superior to acidic prewetted fabric and as-fabricated nanocalcite @ PF. Furthermore, HPLC and FTIR findings further indicated that imidacloprid was decomposed vastly to harmless species by basic prewetted nanocalcite @ PF.